Download - Industrial and Bearing Supplies

Power Beam 1000
LED Work Lamp
HMPB100
LED WORK LAMPS
WORK LAMPS
8
Power Beam 1000
LED Work Lamp – Multivolt 9-33V DC
As an addition to the Hella LED work lamp
range, the Power Beam 1000 has been
developed as a compact high-powered
illuminating source.
114.5
142
112
62
96
By combining 6 high-powered
LEDs into a compact fully sealed
die cast housing, the Power Beam
1000 provides a respectable
850 Lumen output to provide
close range illumination where
physical constraints on mining
machinery exist.
A rated operating temperature from
-40 to +50°C and an expected
lifespan of over 130 times that
of a halogen bulb, in addition to
excellent ingress protection, make
the Power Beam 1000 suitable
for the most unforgiving mining
environments.
With a low power consumption of
18 Watts, the lamp places minimal
strain on the vehicle’s electrical
system while the quality electronics
provide Multivolt operation over
a range of voltage levels from
9 to 33V DC. The Power Beam
1000 also
features
reverse
polarity
protection,
and
overheating
protection,
which turns the
light off when the
integrated thermal sensor
is triggered.
The integrated DT Plug allows
simple installation and waterproof
connectivity, and the heavy-duty
stainless steel bracket allows for a
wide variety of mounting options.
The low EMC signature ensures the
lamp does not interfere with any
critical safety equipment such as
radios or other electrical devices.
Product features
Operating voltage:
Multivolt 9-32 V DC
16 high power LEDs
Power consumption:
18 W
Light output 850 lm
Colour temperature
6500°K
Low EMC Signature
(CISPR25 class 5)
Ingress Protection
IP6K7 and IP6K9K
Lifespan up to 130
times of a halogen bulb
Connection: integrated
DT plug
Polarity protected
LED fail bridge
High-temperature
protection
Environment temp
-40 to +50°C
Power Beam 1000 LED 2.0m high at 10°
1 LUX 39m
MULTI
VOLT
LED
0.6 Kg
9 to 33
V DC
18W
IP6K7 IP6K9K 200G