Download - Industrial and Bearing Supplies

MASTER SWITCH
ACCESSORIES
78
AccuPAX ®
Battery Master Switch
Battery Master Switch 12V
HM4660A
Battery Master Switch 24V
HM4660B
Spare Parts:
HM4660ROD
iROS Roll-over
Protection Device
HM4660SWA
Latching Push On /
Twist Off Switch -
Double Pole, IP65
HM4660SWB
Latching Push On /
Twist Off Switch -
Double Pole with
Guard, IP65
HM4660SWC
Momentary Push
Button Switch -
Single Pole, IP65
HM4660SWD
Momentary Push
Button Switch -
Single Pole with
Guard, IP65
HM4660SWE
Rotary On / Off
Switch, 4 pin, with
Lid (use connector
1-0967325-kit)
HM4660SWF
Push Button Switch,
2 pin (use connector
1-0967325-kit)
HM4660LOC
Lockable Cover,
Stainless Steel
HM4660KTB 7
Pin DIN Connector
with 5M Harness
HM4660KTC 7
Pin DIN Connector
with 700mm
Harness
AccuPAX ® is an intelligent 2-pole,
bi-stable, electro-mechanical
battery master switch with
mechanical locking. It is approved
for hazardous goods transport. It
incorporates a micro controller to
monitor and operate several safety
functions, that is unavailable on
older style battery isolator switches,
and is suitable for 12V and 24V
systems.
Its prime function is to disconnect
and isolate the main battery positive
and negative circuits of the vehicle
or engine plant to render it safe
and/or inoperable. It may be wired
and operated directly at the control
panel on the switch face to replace
existing products. Significantly
more sophisticated control systems
can be implented, with multiple
safety isolators located in the cabin
or elsewhere at desired locations
around the vehicle. AccuPAX can
also be activated by an external
trigger like a roll-over sensor.
In normal situations, AccuPAX will
step through a pre-programmed
shut-down sequence, ensuring
the safe disconnection of onboard
engine management systems
to avoid data corruption.
Incorporated in this sequence
is an alternator field isolation
procedure to prevent damage
to the alternator, battery and
electrical system due to
voltage surges.
In emergency shut down
situations, such as a rollover,
AccuPAX disconnects all
power immediately via the
emergency shut down
switch, or the optional
rollover detection device.
AccuPAX constantly monitors
system voltage and disconnects the
battery if system voltage falls below
the user selected safety level, to
prevent damage to the electrical
system.
The AccuPAX complies with
Australian Standards AS 2809.2
and European ADR 2005.
In addition to the rollover sensor,
optional equipment includes
lock-out guards, switches and
cable harnesses to facilitate easy
installation of the AccuPAX unit.
168
104
130
Technical information:
Ex & CE Certified
Compliant with ADR 2005
Compliant with AS 2809
(Draft)
Field isolation for North
American vehicles
D+ shutdown for European
vehicles
Delayed ECM shutdown to
prevent re-programming
Direct plug in iROS roll
over device – works with
all other roll over devices
(optional equipment - not
supplied)
Roll over simulation test with
status light
Luminous On/ Off/ Roll Over
push button switches
Robust IP65 rated enclosure
Stainless Steel mounting
bracket (Lucas SSB
interchangeable)
Low battery voltages
disconnect
Lockable cover (optional
equipment – not supplied)
104
Switch Rating: HM4660A HM4660B
Operating Voltage 9 to 15 Volts 18 to 30 Volts
118
Current Rating 300A continuous 300A continuous
127
Max Current 5 Sec 2500A 2500A
130
HM4660A
Max Current 30 Sec 600A 600A
Field Isolation Circuit 10A max 10A max
Optional Low Voltage Monitoring