Download - Industrial and Bearing Supplies

UltraRAY ® -R TWIN LED Warning Beacon l Amber l Red l Blue l Green l White
Direct Mount HM500ADIR HM500RDIR HM500BDIR HM500GDIR HM500WDIR
Magnetic Mount HM500AMAG HM500RMAG HM500BMAG HM500GMAG HM500WMAG
MINING WARNING BEACONS
MOBILE BEACONS EQUIPMENT
LIGHTING
42
®
UltraRAY -R TWIN
LED Warning Beacon
As an addition to the Hella LED beacon range, a new
Twin LED beacon has been developed for increased
visibility in bright sunlight with more than double the
luminous intensity of the original UltraRAY ® .
132
120°
3 x Ø4
equispaced
on PCD 130
136
187
130
120°
Amber
4 x Ø4
equispaced
on PCD 178
Red
Blue
Green
The UltraRAY ® -R Twin LED features
either a rotating or flashing pattern
easily selectable by grounding the
function wire, allowing users to
change the flashing pattern with an
in-cabin switch, removing the need
to open the unit.
It is extremely robust, tolerant to
severe vibration levels and very
compact in design. Equipped with
a high impact and shock resistant
polycarbonate lens bolted to a
heavy-duty cast alloy base, it
is sealed by a neoprene O-ring
against dust and water ingress.
The UltraRAY ® -R Twin LED warning
beacon is maintenance free with
no moving parts or fragile globes.
LED beacons are highly efficient,
delivering up to a 70% energy
saving over conventional beacons.
This greatly reduces both operating
temperature and demand on the
vehicle’s electrical system.
Maximum service life and light
output of the high intensity LEDs
is ensured by integrating the heat
sinks into the cast alloy base.
The Multivolt control module
encapsulated directly into the base
also protects the UltraRAY ® -R Twin
against damage from overheating,
reverse polarity and short circuits.
(See technical
section for more
Multivolt
information.)
The
UltraRAY ® -R
Twin LED
warning beacon
is optimized for
continuous use applications
on mining equipment, to ensure
highly effective warning efficiency
in daylight on surface operations
in the extreme environmental
conditions encountered in mining
applications.
The UltraRAY ® -R Twin LED also
features a patented Helio ® shield,
which protects the beacon’s
internal components from UV
damage. The UltraRAY ® -R Twin
LED beacon is available in five LED
signal colours (amber, red, blue,
green and white) to suit all signal
applications. Installation is possible
with either the standard direct
mount, or an optional magnetic
mount or pipe mounting kit.
Product features
Certified SAE J845
Class 1 red & amber
Available in amber, red,
blue, green and white
User selectable output
(rotate or quad flash
patterns)
Automatic daylight
detection
Impact resistant
smooth polycarbonate
lens
Precision Fresnel optics
Powdercoated cast
alloy base
Specifications
Voltage
Multivolt 12 –30V DC
Power consumption
50W average
Frequency
Rotating: 80 cycles/min
Flash: 72 fpm (quad)
Direct, pipe mount or
magnetic installation
options
Low current draw
EMC Tested
Fully encapsulated
electronics
Overheat, reverse
polarity and short
circuit protection
High efficiency, long life
LED light
Requires 10 Amp fuse
Lead Length
2 metres (doubleinsulated
cable)
Protection
Overheat, reverse
polarity and short
circuit protected.
Sealed against dust
and moisture to IP6K5
White
Temperature Range
–20°C to +50°C
Shock resistant to
200G
MULTI
VOLT
IP6K5
LED
200G
BARE
WIRE
0.9Kg
12 to 24
V DC
SAE
COMPLIANT
50W
AVERAGE
HM500AFLX UltraRAY-R TWIN including
vibration proof pole-mount adapter
Spare Parts
9.HM450ALENS
Amber PC Lens
9.HM450RLENS
Red PC Lens
9.HM450BLENS
Blue PC Lens
9.HM450GLENS
Green PC Lens
9.HM450WLENS
White PC Lens
HM400PIPE
Pipe Mount Kit
9.HM450FLX
FlexiMount Adapter