Product Data Sheet for Architectural Services - Pieh Tool

SPEC DATA
NFC, Inc.
• ASTM D4176 - Standard Test Method
for Free Water and Particulate
Contamination in Distillate Fuels (Visual
Inspection Procedures)
• ASTM G85 - Standard Practice for
Modified Salt Spray (Fog) Testing
PHYSICAL PROPERTIES
• Thermally stable to 350 degrees F
(177 degrees C)
• Flexes with substrate under 0 degrees F
(18 degrees C)
• Dries clear
• Acid-resistant
• Salt-resistant
• UV-resistant
• Self-leveling
• Protects against oxidation
• Protects against moisture
• Non-conductive
• Coverage - 1 gallon (3.79 L) covers as
much as 1200 ft 2 (110 m 2 )
Technical Properties
See Table 1.
Table 1 PHYSICAL/TECHNICAL PROPERTIES
Test & Method
Results
ASTM D4176
Appearance
Clear; free from impurities
ASTM D3359
Adhesion
No peeling
ASTM B117
Salt fog test; salt @ 95 degrees F (35 degrees C)
Aluminum
Passes 1000 hours
Stainless Steel
Passes 1000 hours
ASTM D2794
1/2" Mandrel Bend Test Passes 180 degrees
Direct and reverse impact @ 80 lb (36 kg)
No peeling; no lifting
ASTM D2240
Hardness
Rated 2H
ASTM D1308
Chemical resistance
ASTM D1735
Humidity resistance
ASTM G85
Prohesion
Food Grade
Anti-microbial
Passes - No discoloration;
no blistering
Passes 1000 hours (100% RH@100F)
Passes 2000 hours
Letter of Certification Available
Optional anti-microbial product
5. Installation
PREPARATORY WORK
An NFC proprietary surface preparation
product should be used to remove all
surface contaminants prior to coating.
Surface must be completely dry before
application begins.
METHODS
Nyalic can be applied by brush, roller or
sprayer.
PRECAUTIONS
Use a respirator when applying by
sprayer; use gloves for other application
methods. Apply in a well-ventilated work
area.
BUILDING CODES
Installation must comply with
requirements of all applicable local, state
and federal code jurisdictions. Good
workmanship, coupled with proper
detailing and design, ensure durable,
functional and watertight construction.
6. Availability & Cost
Nyalic is only available directly from NFC.
Contact NFC or an NFC licensed
applicator for application information.
7. Warranty
Nyalic has a limited 5-year warranty.
Contact NFC, Inc. for details.
8. Maintenance
Properly installed Nyalic requires no
special maintenance and resists dirt
accumulation.
To clean a surface, use NFC’s Right
Rinse TM and very light agitation with a soft
bristle brush. Use of solvent-based
cleaners will void the warranty.
Scratches and abrasions can be field
repaired using Nyalic in an aerosol can.
9. Technical Services
Detailed information, product literature,
test results and assistance in preparing
project specifications are available from
NFC. Contact NFC, Inc. or visit the
www.nyalic.com website.
©2011 NFC, Inc. All rights reserved. NYALIC is a registered trademark of HBI, Inc.
www.NYALIC.com