eur op eanexhibitionofcreati vityandinnovation - Europe Direct Iasi

EUROINVENT 2013
Class no.
reinforced by titanium particles by a flexible and cost saving
route of powder metallurgy technology. The material
structure provides the following characteristics: density
1,2...1,6 g/cm 3 , porosity 50...65%, friction coefficient
0,59....0,8; wear rate 1...1,5x10 -4 mm 3 /Nm. These properties
are at least comparable with the same for similar
biocomposites that are processed by complex and expensive
technologies.
Applications: grafts for trabecular tissue as bulk material or
coatings
4. Medicine - Health Care - Cosmetics
Image/
Photo
18.3
Title EN
Authors
Institution
Patent no.
Description
EN
Class no.
Plate of metallic foam-rubber composite material
mechanically attached to the table tennis bat and process
for making the same
Mangra Gabriel Ioan, Gingu Oana
University of Craiova, Faculty of Mechanics
OSIM: Patent application No. A00117 / 12.02.2010
Derwent Primary Accession Number: 2011-A29765 [42]
The patent refers to a plate for the tennis table racket and its
processing technology. The plate is made of Al-based foam that
one side is rubberized and the opposite side is machined in order
to attach it on the wooden support of the racket. The major
advantage of this racket and its processing technology is the
volatile organic compounds disposal, forbidden to be used for
rubber adhesion on the wooden support. Also, this racket patent
provides a long-standing exploitation in environmental friendly
terms. Applications: table tennis racket
13. Sports, Games and Leisure
Image/
Photo
NATIONAL
147