eur op eanexhibitionofcreati vityandinnovation - Europe Direct Iasi
eur op eanexhibitionofcreati vityandinnovation - Europe Direct Iasi
eur op eanexhibitionofcreati vityandinnovation - Europe Direct Iasi
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EUROINVENT 2013<br />
17.2<br />
Title EN<br />
Authors<br />
Institution<br />
Patent no.<br />
Description<br />
EN<br />
Class no.<br />
Ultra High Strength Concrete with Hybrid Fibers<br />
without heat treatment<br />
Mircea POPA, Raul ZAGON, Ofelia-Cornelia CORBU<br />
Technical University of Cluj-Napoca, România<br />
Pending<br />
In the research which was carried out by the authors a recipe<br />
for concrete using local materials has been achieved. This<br />
outstanding result regards its fresh and hardened<br />
characteristics. The concrete obtained has a dense, fluid state<br />
and a compressive strength of 160 MPa, featuring all the<br />
descriptions of ultra-high strength concrete (UHSC).<br />
7. Buildings and Materials<br />
Cargo concrete - Cubic concrete samples tested at<br />
compression<br />
17.3<br />
Title EN<br />
Authors<br />
Institution<br />
Patent no.<br />
Description<br />
EN<br />
Class no.<br />
Tele-<strong>op</strong>erated multifunctional mobile platform<br />
Mihai STEOPAN, Adrian COSTEA, Andrei KOKUCS<br />
Technical University of Cluj-Napoca, România<br />
Faculty of Machine Building, Department of Industrial<br />
Design and Robotics<br />
Pending<br />
Tracked mobile platform having a 5 degrees of freedom arm.<br />
The platform and the arm can be controlled remotely through<br />
Bluetooth equipped devices (eg. Mobile phones, tablet pc).<br />
The mobile platform is actuated by two motors that through<br />
a kinematic chain engage in motion the two tracks. The<br />
special displacement of the tracks is triangular allowing for<br />
the navigation on various types of terrains. The articulated<br />
arm has a flexible 5 degrees of freedom arm and has a two<br />
finger gripper mounted as end-effector.<br />
5. Industrial and laboratory equipments<br />
6. Mechanical Engineering - Metallurgy<br />
NATIONAL<br />
132