Body Repair - Henkel Content Management System

14
Mechanical Repair
Gasketing Loctite ® 510 Loctite ® 518
� To meet a broad range of
complex gasketing and sealing
needs
� Fill all voids with excellent fluid
and temperature resistances
� Parts can be disassembled
easily even after extended
service
Flange Type Rigid Rigid
Gap Up to 0.25 mm Up to 0.25 mm
Temperature resistance Up to 200°C Up to 150°C
Oil resistance Excellent Excellent
Water / glycol resistance Excellent Excellent
Practical Hints:
� If there are traces of old gasket left on the
parts to be sealed, clean with Loctite ® 7200
gasket remover
� All parts must be clean and dry before
sealing – use Loctite ® 7063
� Anaerobic products cure between metal
surfaces in the absence of air
Loctite ® 510 – Flange Sealant
� High temperature resistant flange gasket
� For metal flanges
� Adapts to flange surfaces and scratches up
to 0.25 mm
� Increase torque capacity of assembled
flanges
Applications:
For sealing rigid flange faces on transmissions
and engine casings. Seals instantly against low
pressure.
Pack sizes IDH No.
Accordion 50 ml 142608
Cartridge 160 ml 135476
Bottle 250 ml 135477
Loctite ® 518 – Flange Sealant
� Medium strength anaerobic flange gasket
� For metal flanges
� Adapts to flange surfaces and scratches
up to 0.25 mm
� Gel-type consistency
� Ideal for overhead application and for
vertical faces (no dripping)
� Seals instantly against low pressure
Applications:
For sealing rigid flange faces, e.g. water
pump flanges, engine, differential and timing
covers.
Pack sizes IDH No.
Syringe 50 ml 229875
Cartridge 300 ml 435566