Agilent FieldFox RF Analyzer N9912A - Tessco

More documents

Recommendations

Info

Cable and Antenna <strong>Analyzer</strong> (continued) Description Specification Supplemental Information Distance–to–Fault Horizontal Range Range = [(number of points – 1) / frequency span * 2] * velocity factor * speed of light Horizontal Resolution Bandpass Mode Window Types 1 Using recommended calibration kits. Resolution = Range / (number of points – 1) Number of points auto coupled according to start and stop distance entered Number of points settable by user Maximum, medium, and minimum windows 2 Higher cable losses can be measured using transmission or S21 measurements. Cable losses measured in transmission mode limited by transmission dynamic range. 3 QuickCal is performed with the connect LOAD step. Figure 1: CAT Mode, Type–N Calibration Kit – Magnitude (Specification) 6
Cable and Antenna <strong>Analyzer</strong> (continued) Figure 2: CAT Mode, QuickCal – Magnitude (Typical) Figure 3: CAT Mode, Preset Cal – Magnitude (Typical) 7
Page 1 and 2: Agilent FieldFox RF Analyzer N9912A
Page 3 and 4: Table of Contents Definitions Speci
Page 5: Maximum Measurable Cable Loss Using
Page 9 and 10: Display data Trace math Scale Title
Page 11 and 12: Network Analyzer (continued) Figure
Page 13 and 14: Spectrum Analyzer (Option 230 and 2
Page 15 and 16: Spectrum Analyzer (continued) Descr
Page 21 and 22: Receiver IF Bandwidth AM FM Narrow
Page 23 and 24: General Information (continued) Des
Page 25 and 26: Supported Cal Kits The following li

Agilent FieldFox RF Analyzer N9912A - Tessco

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?