OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
13. REPLACEMENT OF FLUORESCENT LAMP<br />
When performing the work, be sure to turn power off. Working<br />
with power on can cause an electric shock or short circuit accident.<br />
The Fluorescent Lamp, when it gets hot, can cause burns. Be<br />
very careful when replacing the Fluorescent Lamp.<br />
To perform work safely and securely, be sure to prepare a step which is in a<br />
secure and stable condition. Not using a step or using an unstable step can<br />
cause violent falling down accidents.<br />
13 -1 REPLACEMENT OF FLUORESCENT LAMP<br />
1 Take out the 3 Tamperproof screws from<br />
the rear of the billboard.<br />
2<br />
3<br />
.<br />
Be sure to disconnect all connectors<br />
conected to the Marquee assembly before<br />
removing the Billboard and/or performing<br />
work.<br />
Take out the two screws which secure the<br />
lower billboard plate mask and remove<br />
billboard<br />
46