OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 - 2 REPLACING AND ADJUSTING THE HANDLE’S VR<br />
Never touch places other than those specified. Touching places not specified can<br />
cause electric shock and/or short circuit.<br />
After the replacement or adjustment of the VR, be sure to set the variable value of<br />
the VR in the test mode’s Volume Setting.<br />
REPLACING THE VOLUME<br />
1<br />
2<br />
3<br />
4<br />
5<br />
Turn off the power.<br />
Disconnect the connector.<br />
Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket.<br />
Take out the 2 screws to remove the Volume Gear and replace the Volume.<br />
After replacing the Volume, perform Volume setting in the Volume Setting Mode.<br />
ADJUSTING THE VOLUME<br />
1<br />
2<br />
3<br />
4<br />
5<br />
In the Test Mode, have the Volume value indicating screen displayed.<br />
Loosen the 2 screws which secure the Volume Bracket to disengage Gear Mesh.<br />
With the Steering Wheel in the centering position, cause gears to be engaged in the manner so that the Volume<br />
Shaft is in the status shown below.<br />
Fasten screws which secure the Volume Bracket.<br />
Perform Volume setting as per the Volume Setting Mode.<br />
34
Change language