OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
OWNER'S MANUAL - Arcade-History
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
8. HANDLE MECHA<br />
In order to prevent an electric shock and short circuit, be sure to turn power off<br />
before performing work by touching the interior parts of the product.<br />
Be careful so as not to damage wirings. Damaged wiring can cause an electric shock<br />
or short circuit accident.<br />
In the test mode, if the steering wheel’s VR variations are not within the allowable range, the VR installation<br />
position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once<br />
every 3 months.<br />
8 - 1 REMOVING THE CONTROL PANEL<br />
1<br />
2<br />
3<br />
4<br />
5<br />
Turn the power switch off.<br />
Remove a total of 4 tamperproof screws from both sides of the control panel’s front.<br />
Remove the two tamperproof screws fromthe underside of the control panel.<br />
Wiring connectors are connected inside the control panel. Carefully draw the control panel in a mnner so as not to<br />
damage wiring.<br />
Disconnect the wiring connector.<br />
33
Change language