OWNER'S MANUAL - Arcade-History

7 - 10 COIN ASSIGNMENTS
The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers
of coins and credits. This mode expresses “how many coins correspond to how many credits.”
SETTING CHANGE PROCEDURE
Setting changes cannot be stored unless the TEST BUTTON is pressed
while the arrow is on EXIT.
1
2
3
Press the SERVICE BUTTON to move the arrow to the desired item.
Choose the desired setting change item by using the TEST BUTTON.
To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
7 - 10 COIN ASSIGNMENTS
COIN ASSIGNMENTS
COIN/CREDIT SETTING #1
ADDITIONAL SETTING
MANUAL SETTING
>EXIT
CHUTE#1 1 COIN 1 CREDIT
CHUTE#2 1 COIN 1 CREDIT
COIN/CREDIT SETTING
Sets the CREDITS increase increment per coin insertion.
There are 27 setings from #1 to #27, expressed in XX
CREDIT as against XX COINS inserted. (TABLE 7.10a,
7.10b) #27 refers to FREE PLAY.
When the COIN CHUTE TYPE is set to INDIVIDUAL,
there are some setting numbers not displayed as indicated in
TABLE 7.10b.
MANUAL SETTING
This allows credit increase setting as against coin insertion
to be further set in the manner finer than COIN/CREDIT
SETTING (refer to TABLE 7.10c).
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
29