Starline Busway Catalog - Power & Systems Innovations

Busway Accessories
35
∂ Cord Drop Accessories
A wide variety of drop cord
assemblies for the plug-in units
can be made-to-order by the
factory, with various fittings,
boxes, devices, NEMA configurations,
cord lengths, colors, etc.
Consult distributor or factory
for the design and prices.
Catalog ordering information
shown below.
1.75”
∑ The Wire Mesh Cord Grip
is for use on Starjacks, for
maximum strain relief to drop
cord. Connects to bottom of
Starjack box.
∏ Surface Mount to Ceiling
The surface mount clip can be
used to mount a busway system
directly to a ceiling surface.
Screw clip to surface, and
connect busway to clip.
π Installation Tool
Used during installation to
make the electrical compression
connection of the busbars in
adjacent sections. Deposit on
item is refunded when tool is
returned. One tool is typically
needed per project.
∫ Closure Strip
The closure strip is used to close
the continuous access slot of
the busway. It is made of white,
rigid plastic, and snaps into
place. It is required for safety
only when busway is mounted
less than 8 feet above the floor.
It may be used for aesthetic
purposes, for keeping dust and
dirt from entering the busway,
or as an added safety measure.
It is easily cut in the field to
be installed around the plug-in
units.
❻ Fuses
Fuses are available for the
Starjacks with fuse holders or
fuse blocks, type OB60, DRF and
FP Series. Fuses are Class CC or
Class H, depending on the plugin
unit. Class J fuse is used with
the B225 busway series fused
disconnect units. Specify the
ampere rating desired.
❼ Cord Reel Unit
A plug-in unit with a cord reel
attached is available in several
sizes. See the distributor or
consult factory for choices.
Ω Receptacle Plug-In Units
A wide variety of NEMA
receptacles may be pre-installed
in plug-in units. Consult
distributor or factory for design
and price.
Drop Cord Ordering Information
Drop cord unit catalog numbers must contain the following specifications:
Busway size (60, 100 or 225)
Length of cord (1 to 25 feet standard)
NEMA configuration of unit
Busway Accessories Designs
DC60 - 15 - L520C - 4
Number of poles in busway
Style C=cord connector; R=receptacle
D=duplex; Q=quad receptacle
Catalog # Description Weight
SJG-1/2 wire mesh grip, 1/2”, .43”-
.54” diameter cable 0.1 lb
SJG-3/4 wire mesh grip, 3/4”, .54”-
.73” diameter cable 0.2 lb
MC60-R rod mount clip for 3/8” rod 0.1 lb
CS-60 closure strip, B60 0.1 lb/feet
F-CC-## class CC fuse, ## = amp rating (1-30)
F-H-## class H fuse, ## = amp rating (1-100)
F-J-## class J fuse, ## = amp rating (10-200)
SM60-1 mounting bracket for holding ceiling tiles 0.2 lb
B100IT installation tool for B100 1.0 lb
OB225-L630-4 plug-in receptacle with fuse
4.3 lb
For an authorized dealer or more information call toll free 800-333-3490 or 412-221-4400