Starline Busway Catalog - Power & Systems Innovations

B100 Busway Series
25
Fuse Block Plug-in Units
Plug-in units with an internal
fuse block consist of a full-sized
junction box with hinged lid,
and a plug head. Insert the plug
head in the busway slot and
rotate 90 degrees to make
electrical connection.
Units are available in 30, 60 and
100 amp max fuse block sizes,
and in 250 or 600 volt max
ratings. A Class H, 3 pole
phenolic fuse block is mounted
in the box. Fuses are not
included, but can be ordered as
a separate item. See page 35.
All units include a copper
grounding lug, mounting tabs,
and two hangers to secure unit
to the busway. Four pole units
also include a neutral wire, with
wire nut, or a neutral block over
40 amps. Units have 1/2 inch
and 3/4 inch conduit knockouts
on 3 sides. UL listed.
Fused Starjack with
External Disconnect
A similar fused unit is available
with the added feature of an
externally operable disconnect
switch. Rocker handle disconnects
circuit before box can be
opened. UL listed.
Fused and Terminal Block Plug-in Units
Catalog # Description Weight
FD100-30-3-250-3 fused disconnect unit, 30A, 250V, 3 pole 5.5 lbs
FD100-30-3-250-4 fused disconnect unit, 30A, 250V, 4 pole 5.5 lbs
FD100-60-3-250-3 fused disconnect unit, 60A, 250V, 3 pole 5.5 lbs
FD100-60-3-250-4 fused disconnect unit, 60A, 250V, 4 pole 5.8 lbs
TB100-40-3 terminal block unit, 40A, 600V max, 3 pole 5.5 lbs
TB100-100-3 terminal block unit, 100A, 600V max, 3 pole 6.0 lbs
Fused Starjack
with External
Disconnect
6.5” 10.37”
3.25”
Terminal Block Units
Plug-in units with a 3 or 4 pole
insulated terminal block are
available, in a full-sized wiring
box with hinged lid. These units
include a 40 or 100 amp max,
3 pole terminal block and copper
ground lug. Four pole unit also
includes a neutral wire and wire
nut, or neutral block over
40 amps. UL listed.
Change “300” to “600” on above FD units for 600 volts max rated units.
For an authorized dealer or more information call toll free 800-333-3490 or 412-221-4400