Starline Busway Catalog - Power & Systems Innovations

B100 Busway Series
19
B100 Busway Parts
Housing Coupler
The standard housing coupler is
used to join adjacent busway
sections mechanically. Supplied
in pairs, for top and bottom of
housing positions. Order one
pair per busway section.
End Piece
The end piece is a 6 inch piece
of housing and insulator, and
end cap. It is used to cover
the protruding copper busbar
connector blades at the end of
a run. Some runs do not require
an end piece, if the protruding
blades are used for the end feed
power connections.
End Cap
The end cap closes off the open
ends of a busway run. It inserts
into the end of the last busway
section, and is secured in place
with a set screw.
Housing
Coupler
Closure Strip
The closure strip is an optional
item, used to close the continuous
access slot of the busway.
It is made of white rigid PVC
and snaps into place. It is
required for safety only when
busway is mounted less than
8 feet above the floor. It may
be used for aesthetic purposes,
for keeping dust and dirt from
entering the busway, or as an
added safety measure. It comes
in 20 foot max pieces, and can be
cut in the field, to be installed
between the plug-in units.
Busway Parts Designs
Catalog # Description Weight
BHC-1 housing coupler, pair 0.2 lb
EP-1 end piece, for B100 1.0 lb
EC-1 end cap, for B100 0.1 lb
CS-1 closure strip, for B100 0.1 lb/feet
B100IT installation tool 2.5 lbs
End Cap
Diagram
2.5”
Closure
Strip
End Piece
6”
Other Busway Accessories
Other accessories for B100 Series
are available, including cord
grips, cord assemblies, receptacle
boxes, plugs, fittings,
fuses, brackets, etc. See page 35
for details.
3.875”
For an authorized dealer or more information call toll free 800-333-3490 or 412-221-4400
6”