Reelcraft Hose Reel Catalog - INSCO Group

Wind Things Up With Reelcraft TM
REEL ACCESSORIES
600867
600872
S260422
OPERATING SWITCHES
600870
For 115 and 230 volt DC reel motors. Push button
switch with 10 AMP fuse. Used for motor #S260430.
600872
For 115 and 230 volt DC reel motors. Push button
switch with 10 AMP fuse and adjustable speed control.
Used for motor #S260430.
600871
Adjustable speed control only. To be used in a system
which already has a switch. Used for motor
#S260430.
600866
12/24 VDC speed control. Used for motor #S260409,
S260583, 260450 and S260626.
600811
Push-button switch. Used for all 12 or 24 volt reel
motors #S260409 and 260450; up to 1/3 h.p.
S600808
600811 switch when packaged with 261604-35
mounting bracket. Used for motor #S260409 and
260450.
600869
Push-button switch. Used for all 12 or 24 volt reel
motors #S260583 and S260626; up to 2/3 h.p.
Reels are equipped with
REWIND electric or compressed air
MOTORS motors to drive chain and
sprocket rewind mechanisms.
ELECTRIC MOTORS
S260409 Reversible type,
12 Volt D.C. 1/3 HP.
260450 Reversible type,
24 Volt D.C. 1/3 HP.
S260430 Reversible type,
single phase, explosion
proof, Class 1 Group D, 115
volt A.C. 1/2 HP. An explosion
proof, Class I Group D
junction box is available for
wiring A.C. motors. #260425.
S260626 24 Volt D.C. 2/3
HP. Electric motor reversible
type. Explosion proof.
S260583 12 Volt D.C. 2/3
HP. Electric motor reversible
type. Explosion proof.
HYDRAULIC MOTOR
370066 1021 RPM, 668
lb-in, 2400 psi intermittent
1800 psi continuous.
S600808
260424
S260426
600867
Switch, speed control with 25 AMP circuit breaker.
Used for motor #S260409; up to 1/3 h.p.
600868
Switch, speed control with 40 AMP circuit breaker.
Used for motor #S260583; up to 2/3 h.p.
S260422
40 AMP circuit breaker. Recommended for use with
D.C. electric rewind motors. Manual reset, push-button
must be pressed firmly to reset.
S260426
Starting solenoid, 12 volt D.C. for activation of motor.
AIR MOTORS
260428 4 AM delivers
up to 1 1/2 horsepower,
1/4" N.P.T. (F) inlet.
260429 6 AM delivers
up to 4 horsepower,
1/2" N.P.T.F. (F) inlet.
ADDITIONAL ACCESSORIES
S600518
Optional chain shroud for series
30000 reels.
260532
260425
260424
Sealed push-button momentary contact switch with
rubber cap. For 12 or 24 volt D.C. service.
260425
Explosion proof switch, class 1 group D, for direct
starting and control for A.C. rewind motor. Press to
start, release to stop. May also be used with solenoid
for 12 or 24 volt D.C. service.
260532
Combination mounting bracket for circuit, solenoid
and starting switch.
261746 Right Side
261746-1 Left Side
Optional chain shroud for
Series 40 reels.
260454 Pneumatic on/off flow control valve assembly,
1/4" N.P.T. (F) inlet and outlet to be used with 4 AM
compressed air motors, We also recommend using a filter,
regulator, and lubricator with compressed air motors. See
page 22 for series 30000 hand crank and motor driven reels.
260455 Same as above with 3/8" N.P.T.F. (F) inlet and
outlet, to be used with 6 AM motors.
50
North America: 800-444-3134 Asia: +63 (45) 625-6624
Europe: +44 (0) 1536 406999 Latin America: 260-489-1685
www.reelcraft.com
Reelcraft Industries is
ISO 9001:2000
Certified Since 1996
Models listed with an icon can be shipped same day upon request when
the order is received by 11:30 AM local time for quantities of 5 or fewer.
Indiana Warehouse California Warehouse
Indiana & California Canadian Warehouse
Warehouses