INSTRUCTION MANUAL FOR SEWING MACHINE - Singer - This Wiki
INSTRUCTION MANUAL FOR SEWING MACHINE - Singer - This Wiki
INSTRUCTION MANUAL FOR SEWING MACHINE - Singer - This Wiki
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
— 24 —<br />
4<br />
it<br />
(4)<br />
FIGURE (4).<br />
UNDER THE BUTTONHOLE FOOT.<br />
BU]TONHOLE <strong>SEWING</strong><br />
5. SET ZIGZAG WIDTH KNOB ON 5 THEN SEW 3-5 STITCHES AS FIGURE (3).<br />
6. SET THE STITCH LENGTH KNOB ABOUT 0.5. ZIGZAG WIDTh KNOB ON 2. NEEDLE POSITION KNOB ON<br />
4. SET STITCH LENGTh ABOUT 0.5. ZiGZAG WIDTh KNOB ABOUT 7 NEEDLE POSITION KNOB ON LEFT<br />
CENTER POSITION. THEN SEW 3-5 STITCHES AS FIGURE (1).,<br />
POSITION. THEN SEW AS FIGURE (2) UN11LL YOU REACHES ThE END OF THE MARKING.<br />
2. REMOVE THE REGULAR PRESSER FOOT AND ATTACH ThE BUTTONHOLE FOOT & PUT ThE FABRIC<br />
1.M.ARK WITH A PENCIL OR CHAU( THE EXACT LENGTH OF THE BUTTONHOLE ON THE FABRIC.<br />
7, REMOVE FABRIC FROM THE <strong>MACHINE</strong> AND OPEN ThE BUTTONHOLE WITH A BUTTONHOLE CUTTER<br />
3. SET THE STCH LENGTH KNOB ON 0’, ZIGZAG WIDTh KNOB ON 5 AND NEEDLE posrno KNOB ON<br />
RIGHT POSITION. PUSH ThE R BUTTON SEW UNTILL YOU REACHES THE END OF THE MARKING AS<br />
CR SEAM CUTTER.<br />
Before sewing fit bultonhole tool Cul outtonhole along centre ith<br />
as shown. cutter as shown.<br />
(1) (2)<br />
1r
Change language