Floor Pit - GIFAS W.J. Gröninger ELECTRIC GmbH

YOUR WISHES ARE OUR BENCHMARK
Underfloor distributors
Catalogue
02

Table of Contents
PIAZZA
Introduction
Overview
PIAZZA
PIAZZA 540
PIAZZA 700
PIAZZA 1000
Pages 4 - 7
Page 3
Page 4
Page 5
Page 6
Page 7
PIAZZA
Practical
examples
Installation
instructions
Pages 8 - 11
Pages 8 - 10
Page 11
CAMPETTO
Overview
CAMPETTO
CAMPETTO V
CAMPETTO VI
CAMPETTO VII
CAMPETTO VIII
Pages 12 - 16
Page 12
Page 13
Page 14
Page 15
Page 16
CAMPETTO
Practical
examples
Installation
instructions
Pages 17 - 20
Pages 17 - 19
Page 20
PICCOLINO /
RETRANT
PICCOLINO
RETRANT
Practical
examples
Pages 21 - 23
Page 21 Page 22
Page 23
2 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Introduction
Underfloor distributors
virtually invisible - always within reach
The structure of an underfloor distributor
Thanks to our underfloor distributors, electrical power is quickly available
anywhere and without time-consuming installation work! As with all of our
products, we attach great importance to high-quality components
and manufacturing. Only solid rubber distributors made in-house, with
their outstanding material properties, are used.
The benefits for you
--
Power available at any time and quickly
--
Ready for use immediately
--
Can be walked or driven over during operation
--
No power cables lying around, no danger of tripping
--
Covers can be individually filled / paved
--
Lockable in the contacted area
--
Gas springs for force-free, automatic opening
--
Frost-proof operation thanks to cover heating
--
Flooding-resistant on request
--
Maintenance-free solid rubber distributor system for electricity, water,
compressed air and data connections, fittings as per the client's
wishes
Our services
--
Personalised, professional advice, including on site
--
Tried-and-tested product range
--
Tailored, customised solutions
--
Production of single and large series
--
Long spare parts availability
Cable opening
(for closed operation)
Flexible connecting cable
Electric supply line
Outlet for drainage
Built in accordance with:
--
BGA V1 and BGA V3
--
VDE 0100 Part 410 and 540
--
VDE 0660 Part 500
--
VDE 0660 Part 501 - depending on design
--
VDE 0471
Power distributor
Gas
spring
Connecting set
Example view of an
underfloor distributor
Earthing plugs
The right choice
The following questions need to be answered in order to choose the right
underfloor distributor:
1. What power connections are wanted
The size of the solid rubber distributor is defined by the socket occupancy
and type of fuses used. The distributor is mounted on the cover of the
underfloor distributor. The size of the power distribution also defines the
junction box. We will be happy to provide more detailed information and
explanations.
2. Where will the underfloor distributor be installed
Information regarding internal or external installation, along with how it
will be used, is useful for ensuring the best possible design.
3. Does the underfloor distributor need to be able to withstand traffic
Your underfloor distributor is designed specifically for your needs.
The higher the weight, the stronger the underfloor distributor and the
foundations need to be.
4. Do you want the cover to be filled
If your underfloor distributor is to blend in perfectly with its surroundings,
filling of the cover is required. There are no restrictions on the type of
filling that can be used (cobbles, wood, tar, etc.).
5. Is drainage guaranteed
In order to protect the underfloor distributor from water damage, drainage
must be guaranteed through the preparation of appropriate drainage
(this is always the client's responsibility).
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
3

PIAZZA
Overview of PIAZZA 540 / 700 / 1000
PIAZZA 540 PIAZZA 700 PIAZZA 1000
Product features
--
Sturdy, easy to use and safe in operation
--
Can be walked or driven over even during operation
--
Integrates perfectly into its surroundings thanks to customisable
filling options
--
Secured against unauthorised opening (vandal-proof) and lockable
in the contacted area
--
Easy and quick opening and closing, supported by gas springs
--
Frost-proof operation thanks to cover heating
--
The GIFAS solid rubber distributor guarantees optimum operating
safety down to -40°C.
--
No formation of condensation thanks to the GIFAS solid rubber
distributor
--
Resistant to environmental influences
--
Stainless steel construction, all metal parts made from V2A
--
Visible reflectors on the opened cover system
--
Distributor fastening on the underside of the cover
--
The connector distributor can be accessed when installed (E-check)
--
Pit cover, lock and distributor can be replaced
Technical data PIAZZA 540 PIAZZA 700 PIAZZA 1000
Area of use Internal / external area Internal / external area Internal / external area
Classification as per EN 124 400kN (40t) / D400 400kN (40t) / D400 400kN (40t) / D400
Cover Covers can be individually filled /
paved
580x580x70mm
Covers can be individually filled /
paved
700x700x70mm
Covers can be individually filled /
paved
1000x1000x70mm
Weight Approx. 350kg Approx. 450kg Approx. 780kg
Installation depth Approx. 1200mm Approx. 1300mm Approx. 1300mm
GIFAS solid rubber distributors 3800 series 7800 series 7800/7900 series
Can be equipped in accordance
with the client's wishes (power,
water, waste water, compressed
air and EDP connections)
Fuses
1 CEE built-in socket
5x16A/400V
2 protective contact sockets
1 RCCB 40/0.03A
1 LP 16A / 3-pin
2 LP 16A / 1-pin
1 CEE built-in socket
5x63A /400V
1 CEE built-in socket 5x32A/400V
1 CEE built-in socket 5x16A/400V
3 protective contact sockets
1 LP 63A / 3-pin
1 LP 32A / 3-pin
1 LP 16A / 3-pin
3 LP 16A / 1-pin
1 LP 63A / 3-pin pre-fusing
1 RCCB 63/0.03A / 4-pin for 63A
socket
1 RCCB 63/0.03A/ 4-pin for the
remaining sockets
1 CEE built-in socket 5x63A/400V
1 CEE built-in socket 5x32A/400V
3 CEE built-in socket 5x16A/400V
6 protective contact sockets
1 LP 63A / 3-pin
1 LP 32A / 3-pin
3 LP 16A / 3-pin
6 LP 16A / 1-pin
1RCCB 63/0.03A for
63A built-in socket
1RCCB 63/0.03A for 16A built-in
sockets
1 RCCB 63/0.03A for 32A builtin
socket and protective contact
sockets
4 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

PIAZZA
PIAZZA 540
Solid stainless steel construction (V2A) 540 x 540 mm, load capacity up
to 400 kN, gas springs for fully automatic opening, shaft cover can be
custom-filled, distributor as per the client's request.
Technical additions
Cover filling:
Cable exit flap:
Locking:
Heating:
The pit with a depth of 70 mm
can be custom-filled to blend in with its
surroundings.
(180x130 mm) integrated into the shaft
cover frame.
A self-cleaning lock with snap fastener
closes the shaft cover.
Cable exit flap secured with a double bit
lock (locking tool included in scope of
delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Supplied package
Stainless steel construction with
--
fillable shaft cover
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Mounted on concrete ring (H = 470 mm, NW = 600 mm).
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
5

PIAZZA
PIAZZA 700
Solid stainless steel construction (V2A) 700 x 700 mm, load capacity up
to 400 kN, gas springs for fully automatic opening, shaft cover can be
custom-filled, distributor as per the client's request.
Technical additions
Cover filling:
Cable exit flap:
Locking:
Heating:
The pit with a depth of 70 mm can be
custom-filled to blend in with its surround
ings.
(180x130 mm) integrated into the shaft
cover frame.
A sturdy closing mechanism
(with snap lock) closes the shaft cover
and it can also be secured with a
shackle lock.
Cable exit flap secured with a double bit
lock (locking tool included in scope of
delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Supplied package
Stainless steel construction with
--
fillable shaft cover
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Mounted on concrete ring (H = 470 mm, NW = 800 mm).
6 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

PIAZZA
PIAZZA 1000
Solid stainless steel construction (V2A) 1000 x 1000 mm, load capacity
up to 400 kN, gas springs for fully automatic opening, shaft cover can be
custom-filled, distributor as per the client's request.
Technical additions
Cover filling:
Cable exit flap:
Locking:
Heating:
The pit with a depth of 70 mm can be
custom-filled to blend in with its surround
ings.
(180x130 mm) integrated into the shaft
cover frame.
A sturdy closing mechanism
(with snap lock) closes the shaft cover
and it can also be secured with a
shackle lock.
Cable exit flap secured with a double bit
lock (locking tool included in scope of
delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Supplied package
Stainless steel construction with
--
fillable shaft cover
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Mounted on concrete ring (H = 470 mm, NW = 1000 mm).
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
7

Practical examples
PIAZZA
Lübeck town hall market, PIAZZA with payment system
Lübeck town hall market, PIAZZA with payment system
Lübeck town hall market, PIAZZA with payment system
Dresden “Altmarkt”, PIAZZA 700
Munich Residence, PIAZZA 700
Munich Residence, PIAZZA 700
8 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Practical examples
PIAZZA
Thyssen, PIAZZA 700 Thyssen, PIAZZA 700
Wiesbaden Assembly Rooms, PIAZZA 700 Wiesbaden Assembly Rooms, PIAZZA 700
Dresden "Zwinger", PIAZZA 700 Dresden "Zwinger", PIAZZA 700
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
9

Practical examples
PIAZZA
Detmold marketplace, PIAZZA 1000 Detmold marketplace, PIAZZA 1000
Hangar, PIAZZA 2000 Hangar, PIAZZA 2000
Färöer-Islands Airport, PIAZZA 2000 Air base, PIAZZA 2000
10 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Installation instructions
PIAZZA installation and assembly procedure
Excavating the installation pit Customer-side concrete ring Insertion of the unit
Insertion of the entire unit into the
prepared installation pit
Levelling
Decanting and concreting-in
Adaptation to the
surroundings
with filler material
Fully installed PIAZZA
With underfloor systems involving fresh water, the terminal
distributor must be hung on the side opposite the water tap!
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
11

CAMPETTO
Overview of CAMPETTO V / VI / VII / VIII
CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII
Product features
--
Sturdy, easy to use and safe in operation
--
Can be walked or driven over even during operation
--
Integrates perfectly into its surroundings thanks to customisable
filling options
--
Secured against unauthorised opening (vandal-proof) and lockable
in the contacted area
--
Easy and quick opening and closing, supported by gas springs
--
Frost-proof operation thanks to cover heating option
--
The GIFAS solid rubber distributor guarantees optimum operating
Safety down to -40°C.
--
No formation of condensation thanks to the GIFAS solid rubber
distributor
--
Resistant to environmental influences
--
Stainless steel construction, all metal parts made from V2A
--
Visible reflectors on the opened cover system
--
Cover pit can be removed by loosening the screws for maintenance
purposes
--
Distributor fastening on the underside of the cover
--
The connector distributor can be accessed when installed (E-check)
--
Pit cover, lock and distributor can be replaced
Technical data CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII
Area of use Internal / external area Internal / external area Internal / external area Internal / external area
Maximum load
Classification
as per EN 124
Cover
Up to 30kN (3t), special
designs 50kN
125kN (12.5t)
Up to 30kN (3t)
Special designs 50kN
125kN (12.5t)
15kN (1.5t) / A15 125kN (12.5t) / B125 15kN (1.5t) / A15 125kN (12.5t) / B125
Stainless steel non-slip
steel floor plate,
can be supplied in two
sizes
628x435mm / 778x535mm
Covers can be individually
filled / paved
can be supplied in two
sizes
628x435mm / 778x535mm
Stainless steel non-slip
steel floor plate
880x992mm
Covers can be individually
filled / paved
880x992mm
Weight Approx. 60kg Approx. 70kg Approx. 250kg Approx. 250kg
Installation depth
Dependent on design Dependent on design 1000mm
1000mm
500 or 670mm
500 or 670mm
GIFAS solid rubber
distributors
Can be equipped in
accordance with the client's
wishes (power, water, waste
water, compressed air and
EDP connections)
Fuses
Individual series 7200 to
7900
1 CEE built-in socket
5x32A/400V
1 CEE built-in socket
5x16A/400V
3 protective contact
sockets
1 LP 32A / 3-pin
1 LP 16A / 3-pin
3 LP 16A / 1-pin
1 LP 63A / 3-pin for prefusing
1 RCCB 63/0.03 A / 4-pin
for all sockets
Individual series 7200 to
7900
1 CEE built-in socket
5x32A/400V
1 CEE built-in socket
5x16A/400V
3 protective contact
sockets
1 LP 32A / 3-pin
1 LP 16A / 3-pin
3 LP 16A / 1-pin
1 LP 63A / 3-pin for prefusing
1 RCCB 63/0.03A / 4-pin for
all sockets
Individual series 7200 to
7900
1 CEE built-in socket
5x63A/400V
1 CEE built-in socket
5x32A/400V
3 CEE built-in socket
5x16A/400V
6 protective contact
sockets
1 LP 63A / 3-pin
1 LP 32A / 3-pin
3 LP 16A / 3-pin
6 LP 16A / 1-pin
1 RCCB 63/0.03A for 63A
built-in socket
1 RCCB 63/0.03A for 16A
built-in socket
1 RCCB 63/0.03A for 32A
built-in socket protective
contact sockets
Individual series 7200 to
7900
1 CEE built-in socket
5x63A/400V
1 CEE built-in socket
5x32A/400V
3 CEE built-in socket
5x16A/400V
6 protective contact
sockets
1 LP 63A / 3-pin
1 LP 32A / 3-pin
3 LP 16A / 3-pin
6 LP 16A / 1-pin
1 RCCB 63/0.03A for 63A
built-in socket
1 RCCB 63/0.03A for 16A
built-in socket
1 RCCB 63/0.03A for 32A
built-in socket protective
contact sockets
12 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

CAMPETTO
CAMPETTO V
Solid stainless steel construction (V2A) in two sizes, load capacity up
to 30 kN (special design up to 50 kN), gas springs for fully automatic
opening, shaft cover made from non-slip steel floor plate, distributor as
per the client's request.
Technical additions
Cover:
Cable exit flap:
Locking:
Heating (optional):
V2A non-slip steel floor plate.
(135x90 mm) in the centre on the head
side of the cover.
A self-cleaning lock with snap fastener
closes the shaft cover (locking tool includ
ed in the scope of delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
Sand
Gravel
Pavement
Concrete
collar
for distributors
7200 – 7400
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Supplied package
Stainless steel construction with
--
cover made from V2A non-slip steel floor plate
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Sand
Gravel
Pavement
Concrete
collar
for distributors
7700 – 7900
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
13

CAMPETTO
CAMPETTO VI
Solid stainless steel construction (V2A) in two sizes, load capacity up
to 125 kN, gas springs for fully automatic opening, shaft cover can be
custom-filled, distributor as per the client's request.
Pavement
Technical additions
Sand
Cover filling:
Cable exit flap:
Locking:
Heating (optional):
The pit with a depth of 70 mm can be
custom-filled to blend in with its surround
ings.
(135x90 mm) in the centre on the head
side of the cover.
A self-cleaning lock with snap fastener
closes the shaft cover (locking tool includ
ed in the scope of delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
Gravel
Concrete
collar
for distributors
7200 – 7400
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Supplied package
Stainless steel construction with
--
fillable shaft cover
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Sand
Gravel
Pavement
Concrete
collar
for distributors
7700 – 7900
14 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

CAMPETTO
CAMPETTO VII
992
Solid stainless steel construction (V2A), load capacity up to 15 kN
(special design up to 50 kN), gas springs for fully automatic opening,
shaft cover made from non-slip steel floor plate, distributor as per the
client's request.
Technical additions
Cover:
Cable exit flap:
Locking:
Heating (optional):
V2A non-slip steel floor plate.
(135x90 mm) in the centre on the head
side of the cover.
A self-cleaning lock with snap fastener
closes the shaft cover (locking tool includ
ed in the scope of delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
Sand
Sand
Gravel Kies
Pavement
Bepflasterung
Concrete collar
Betonmanschette
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
940
for distributors
7200 – 7900
Supplied package
Stainless steel construction with
--
cover made from V2A non-slip steel floor plate
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
15

CAMPETTO
CAMPETTO VIII
992
Solid stainless steel construction (V2A), load capacity up to 125 kN, gas
springs for fully automatic opening, shaft cover can be custom-filled,
distributor as per the client's request.
Technical additions
Cover filling:
Cable exit flap:
Locking:
Heating (optional):
The pit with a depth of 70 mm can be
custom-filled to blend in with its surround
ings.
(280x90 mm) in the centre on the head
side of the cover.
A self-cleaning lock with snap fastener
closes the shaft cover (locking tool includ
ed in the scope of delivery).
The manhole cover is a thermostatic
controlled heating band relocated to
Frost at an easy opening to
guarantee.
Sand
Gravel Kies
Pavement Bepflasterung
Concrete Betonmanschette collar
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
940
for distributors 7200 – 7900
Supplied package
Stainless steel construction with
--
fillable shaft cover
--
solid rubber electrical distributor
--
junction box
Fully assembled and wired.
16 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Practical examples
CAMPETTO
BUGA Koblenz, CAMPETTO with diving bell
BUGA Koblenz, CAMPETTO with diving bell
BUGA Schwerin, CAMPETTO V
London Olympic Games, CAMPETTO VI
Bad Saarow station, CAMPETTO VI
Bad Saarow station, CAMPETTO VI
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
17

Practical examples
CAMPETTO
Meckenbeuren church square, CAMPETTO VI
Meckenbeuren church square, CAMPETTO VI
Daimler presentation hall, CAMPETTO VI
Daimler presentation hall, CAMPETTO VI
Hotel Grand Spa Resort Sylt, CAMPETTO VI
Melitta Minden, CAMPETTO VI
18 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Practical examples
CAMPETTO
Town of Illertissen, CAMPETTO VI
Pforzheim marketplace, CAMPETTO VI
Hampton Court Palace, CAMPETTO VI
Sea King Militär Hangar, CAMPETTO VIII
Max Planck Institute, CAMPETTO VIII
Hamburg CruiseCenter, CAMPETTO VIII
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
19

Installation instructions
CAMPETTO installation and assembly procedure
Excavating the installation pit Topping up the installation pit Insertion of the unit
Filling Decanting and concreting-in Adaptation to the surroundings
with filler material
Fully installed CAMPETTO
20 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

PICCOLINO
PICCOLINO 120 / 200
PICCOLINO 120 PICCOLINO 200
Product features
--
Solid stainless steel construction, rust-free
--
Completely maintenance-free (E-check)
--
Cover made from non-slip steel floor plate
--
Easy operation
--
Can be walked or driven over during operation
--
Ground-flush installation
--
Excellent operating safety thanks to reclosing after commissioning
--
Locking is performed using a countersunk, cover-flush dual bit lock (1
key included in the scope of delivery)
--
Cable exit opening in the cover lid for cables up to d = 15 mm
(PICCOLINO 120), d = 25 mm (PICCOLINO 200)
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Technical data PICCOLINO 120 PICCOLINO 200
Area of use Underfloor distributors for restricted spaces Underfloor distributors for restricted spaces
Classification as per EN 124 2kN (200kg) 250kN (25 t) / C250
Cover
Stainless steel non-slip steel floor plate
120x120mm
Weight Approx. 4.2kg Approx. 7.5kg
Installation depth Approx. 400mm Approx. 400mm
Equipment options 2m GIFAS-PROFLEXX-07 cable 3x2.5 m 2
1 protective contact coupling 16A/230V (IP 68)
or
1 CEE coupling 16A/400V (IP67)
Stainless steel non-slip steel floor plate
200x200mm
2m GIFAS-PROFLEXX-07 cable 3x2.5 m 2
1 protective contact coupling 16A/230V (IP 68)
or
1 CEE coupling 5x16A/400V (IP 67) or
1 CEE coupling 5x32A/400V (IP 67)
Twist protection
Twist protection
Potential Earth
cross slot screw
Potential Earth
cross slot screw
Schuko-socket
WD 230V 16A
holder
socket
2m GIFAS
PROFLEXX 3x2,5
(connection and
shrinking need to
be executed at
contruction side)
Potential Earth
M8 bolt
2m GIFAS
PROFLEXX 3x2,5
(connection and
shrinking need to
be executed at
contruction side)
cable exit
square
sash
fastener
cable exit
square sash
fastener
PICCOLINO 120 PICCOLINO 200
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
21

RETRANT
RETRANT
Product features
--
Solid stainless steel construction, rust-free
--
Completely maintenance-free (E-check)
--
Cover made from non-slip steel floor plate
--
Easy operation
--
Can be walked or driven over during operation
--
Ground-flush installation
--
Excellent safety thanks to the GIFAS double pressure method; the
cover is held securely closed even without a lock
--
Locking is performed using a countersunk, cover-flush dual bit lock (1
key included in the scope of delivery)
--
Cable exit for cables is located in the shaft cover
It is the client's responsibility to ensure the standards-appropriate
substructure, correct installation of the shaft and corresponding
drainage. The shaft cover is not sealed against surface water.
Technical data
RETRANT
Area of use
Classification as per EN 124
Underfloor distributors for restricted spaces
15kN (1.5t) / A15
Cover
Stainless steel non-slip steel floor plate
340x240mm
Weight
Approx. 25kg
Installation depth
Approx. 420mm
GIFAS solid rubber distributors Series 2516, protection category IP 65
Equipment options
Individual as per the client's wishes
1 CEE built-in socket 5x32A/400V in straight design
1 protective contact socket 230V (IP 68)
Cable input
Stainless steel cover
Cable outlet 50 x 50 mm
Solid rubber casing type 2516
Lower part steel casing
22 GIFAS ELECTRIC GmbH · Borsigstrasse 9 · 41469 Neuss · GERMANY

Practical examples
PICCOLINO / RETRANT
Apartment house, PICCOLINO 200
Town of Lingen, RETRANT
Wiesbaden Assembly Rooms, RETRANT
Wiesbaden Assembly Rooms, RETRANT
Lübeck town hall market, RETRANT
Bremen “Wesercafé”, RETRANT
Telephone +49 2137 105-0 · Fax +49 2137 105-230 · verkauf@gifas.de · www.gifas.de
23

CONTACT US TODAY
Technical modifications reserved 11/2013
New products and specialist solutions, along with the latest product catalogue,
can be found on our website.
www.gifas.de
GIFAS ELECTRIC GmbH
Borsigstrasse 9
41469 Neuss
GERMANY
Phone +49 2137 105-0
Fax: +49 2137 105-230
verkauf@gifas.de
www.gifas.de