ULTIMATE Marine - Isover
ULTIMATE Marine - Isover ULTIMATE Marine - Isover
Pleasant voyage – with ULTIMATE quietness. 1.0 0.8 0.6 0.4 0.2 0.0 Absorption ratio in comparison to stone wool according to ISO 354 ULTIMATE U MPN 30 (kg/m 3 ), 50 mm Stonewool slab 50 (kg/m 3 ), 50 mm Stonewool slab 70 (kg/m 3 ), 50 mm ULTIMATE U MPN 30 (kg/m 3 ), 100 mm Stonewool slab 60 (kg/m 3 ), 100 mm 125 250 500 1000 2000 4000 Frequency [Hz] Acoustic insulation on board – especially in passenger shipbuilding – has been the subject of continuously rising standards. But ULTIMATE will easily help you make that decisive leap forward to state-of-the art solutions. With acoustic insulation properties improved by up to 50%, this high-performance insulation clearly distinguishes itself from traditional solutions. ULTIMATE achieves identical sound absorp tion properties with only about half of the weight, compared to traditional stone wool. This means that ULTIMATE offers you improved acoustic comfort due to its high-level sound absorption properties as well as very good sound reduction. Unheard – of advantages – for your passengers and you. Air flow resistivity kPa·s/m 2 Sound transmission loss R(dB) ULTIMATE Stonewool 80 24 (kg/m 3 ): ≥ 12 30-50 (kg/m 3 ): ≥ 5 70 36 (kg/m 3 ): ≥ 20 70 (kg/m 3 ): ≥ 18 60 66 (kg/m 3 ): ≥ 48 100 (kg/m 3 ): ≥ 25 50 80 (kg/m 3 ): ≥ 70 120 (kg/m 3 ): ≥ 35 40 30 e.g. α w -Value 1,00 U MFV 36-60 mm 20 10 ULTIMATE Steel plate 66-70 + 66-30 (Stiffener) 0 100 125 160 200 250 315 400 500 630 800 100 Frequency [Hz] 1250 1600 200 2500 3150 innovative theatre area aboard AIDA cruise vessel 10
ULTIMATE – And noise stays outside Acoustic insulation is one of the major tasks insulation materials have to achieve, especially in passenger liners. You not only want to protect your passengers from distracting and potentially harmful noise, you want to create a pleasant acoustic environment. Installing sound absorption materials like ULTIMATE is an excellent way to achieve this. The following set of acoustic measurements shows that light weight products achieve extraordinary results in sound reduction. It´s not weight that counts, it’s performance! U MPN 66 (66 kg/m 3 ), 2 x 30 mm U MPN 66 (66 kg/m 3 ), 30 mm (stiffeners) 80 70 60 80 70 60 50 50 R w = 47 dB R(dB) 40 30 20 10 ULTIMATE Steel plate 66-2x30 + 66-30 (stiffener) R(dB) 40 30 20 10 0 100 125 160 200 250 315 400 500 630 800 100 Frequency [Hz] 1250 1600 200 2500 3150 0 100 U MPA 48 (48 kg/m 3 ), 100 mm U MPA 66 (66 kg/m 3 ), 30 mm (stiffeners) 80 70 60 80 70 60 50 50 R w = 49 dB R(dB) 40 30 20 10 ULTIMATE Steel plate 48-100 + 66-30 (stiffener) R(dB) 40 30 20 10 0 100 125 160 200 250 315 400 500 630 800 1000 Frequency [Hz] 1250 1600 2000 2500 3150 0 100 80 70 60 50 80 U MPN 24 (24 kg/m 3 ), 100 mm 70 without stiffener insulation 60 50 80 70 60 50 R(dB) 40 30 20 10 ULTIMATE Steel plate 48-100 + 66-30 (stiffener) R(dB) 40 30 20 10 R w = 48 dB ULTIMATE 24-100 no insulation on stiffener Steel plate R(dB) 40 30 20 10 ULTIMATE Steel plate 24-100 + no stiffener insulation 0 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 0 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 0 100 125 160 200 250 315 400 500 630 800 1000 Frequency [Hz] Frequency [Hz] Frequency [Hz] 1250 1600 2000 2500 3150 U MPN 90 (90 kg/m 3 ), 50 mm Steel layer 2 + 3 mm 80 70 60 R w = 53 dB R(dB) 50 40 30 20 10 ULTIMATE 90-50 Acoustic result with screed layer see page 19 0 100 125 160 200 250 315 400 500 630 800 1000 Frequency [Hz] 1250 1600 2000 2500 3150 * For more information visit our homepage www.isover-technical-insulation.com. Measurements under laboratory conditions. 11
- Page 1 and 2: Marine Insulation ULTIMATE insulati
- Page 3 and 4: ULTIMATE - The new standard for top
- Page 5 and 6: Application Overview ISOVER Insulat
- Page 7 and 8: Sometimes less is more. Lower costs
- Page 9: Products available with different t
- Page 13 and 14: ULTIMATE - All in One Effective fir
- Page 15 and 16: Labour savings. Better conditions f
- Page 17 and 18: ULTIMATE - On the safe side. ULTIMA
- Page 19 and 20: The ultimate Floating Floor solutio
- Page 21 and 22: Only what complies with all norms c
- Page 23 and 24: Logistics Acoustic properties Therm
<strong>ULTIMATE</strong><br />
– And noise stays outside<br />
Acoustic insulation is one of the major tasks insulation materials have to achieve, especially in passenger liners.<br />
You not only want to protect your passengers from distracting and potentially harmful noise, you want to create a<br />
pleasant acoustic environment. Installing sound absorption materials like <strong>ULTIMATE</strong> is an excellent way to achieve<br />
this. The following set of acoustic measurements shows that light weight products achieve extraordinary results in<br />
sound reduction. It´s not weight that counts, it’s performance!<br />
U MPN 66 (66 kg/m 3 ), 2 x 30 mm<br />
U MPN 66 (66 kg/m 3 ), 30 mm (stiffeners)<br />
80<br />
70<br />
60<br />
80<br />
70<br />
60<br />
50<br />
50<br />
R w<br />
= 47 dB<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
<strong>ULTIMATE</strong><br />
Steel plate<br />
66-2x30 + 66-30 (stiffener)<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
100<br />
Frequency [Hz]<br />
1250<br />
1600<br />
200<br />
2500<br />
3150<br />
0<br />
100<br />
U MPA 48 (48 kg/m 3 ), 100 mm<br />
U MPA 66 (66 kg/m 3 ), 30 mm (stiffeners)<br />
80<br />
70<br />
60<br />
80<br />
70<br />
60<br />
50<br />
50<br />
R w<br />
= 49 dB<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
<strong>ULTIMATE</strong><br />
Steel plate<br />
48-100 + 66-30 (stiffener)<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
1000<br />
Frequency [Hz]<br />
1250<br />
1600<br />
2000<br />
2500<br />
3150<br />
0<br />
100<br />
80<br />
70<br />
60<br />
50<br />
80<br />
U MPN 24 (24 kg/m 3 ), 100 mm<br />
70<br />
without stiffener insulation<br />
60<br />
50<br />
80<br />
70<br />
60<br />
50<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
<strong>ULTIMATE</strong><br />
Steel plate<br />
48-100 + 66-30 (stiffener)<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
R w<br />
= 48 dB<br />
<strong>ULTIMATE</strong> 24-100 no insulation on stiffener<br />
Steel plate<br />
R(dB)<br />
40<br />
30<br />
20<br />
10<br />
<strong>ULTIMATE</strong><br />
Steel plate<br />
24-100 + no stiffener insulation<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
1000<br />
1250<br />
1600<br />
2000<br />
2500<br />
3150<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
1000<br />
1250<br />
1600<br />
2000<br />
2500<br />
3150<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
1000<br />
Frequency [Hz] Frequency [Hz] Frequency [Hz]<br />
1250<br />
1600<br />
2000<br />
2500<br />
3150<br />
U MPN 90 (90 kg/m 3 ), 50 mm<br />
Steel layer 2 + 3 mm<br />
80<br />
70<br />
60<br />
R w<br />
= 53 dB<br />
R(dB)<br />
50<br />
40<br />
30<br />
20<br />
10<br />
<strong>ULTIMATE</strong> 90-50<br />
Acoustic result with screed layer see page 19<br />
0<br />
100<br />
125<br />
160<br />
200<br />
250<br />
315<br />
400<br />
500<br />
630<br />
800<br />
1000<br />
Frequency [Hz]<br />
1250<br />
1600<br />
2000<br />
2500<br />
3150<br />
* For more information visit our homepage www.isover-technical-insulation.com. Measurements under laboratory conditions.<br />
11
Change language