Cordyne_standard_ms_catalog_06122013-opt. - Cordyne, Inc.

ESX-K SERIES
Non-Combination, FVNR, IEC Configuration
Enclosure Ratings: NEMA 7/9 Mfg: Killark
1/4 HP - 250 HP (230V)
Standard Features:
• IEC Contactor with adjustable thermal overload (Class 10).
• Oversized control power transformer (optional).
• External machined flange joint design.
• Integral cast mounting feet.
• Units come standard with hinged covers.
• S.S. (316) captive quick thread cover bolts (optional).
• Ground lug package.
• Steel mounting pan enclosures.
• All enclosures suitable for drilling and tapping.
• Cast from copper – free aluminum – Max 0.25% copper content.
• Stainless steel shot or sandblasted natural finish.
• All enclosures suitable for NEMA 4X (optional).
• Cast aluminum and stainless steel hinge (optional).
• Units are assembled, pre-wired and ready to go straight out of the box.
Compliances:
N.E.C. CL. I, Div. 1&2 Groups B, C & D
CL, II, Div. 1&2 Groups E, F. & G
CL. III, Enclosures 4X
NEMA 3, 4X, 7 & 9
Approvals:
U.L. Listed – Standard 1203
CSA Certified – Standard C22.2 No. 30-M1916
CL. I, Div. 1&2 Groups B, C & D
CL. II, Div. 1&2 Groups E, F & G
CL. III, Enclosure 4X
NEMA 3, 4X, 7 & 9
HP
FULL LOAD AMPS @
230V/3PHASE/60HZ
OVERALL
DIMENSIONS
OVERALL
MOUNTING
BASE PART NUMBER
LIST PRICE
0.25*
1.4
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.25-230-000000
$3,329.00
0.5*
2.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.5-230-000000
$3,329.00
0.75*
3.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-0.75-230-000000
$3,329.00
1*
4.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1-230-000000
$3,329.00
1.5*
6.0
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-1.5-230-000000
$3,329.00
2*
6.8
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-2-230-000000
$3,329.00
3*
9.6
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-3-230-000000
$3,329.00
5*
15.2
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-5-230-000000
$3,394.00
7.5*
22
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-7.5-230-000000
$3,430.00
10*
28
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-10-230-000000
$3,500.00
15*
42
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-15-230-000000
$3,589.00
20
54
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-20-230-000000
$3,621.00
25
68
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-25-230-000000
$3,641.00
30
80
20”H x 12.5”W x 9.125”D
18.375”H x 5”W
CH-ESX-K-30-230-000000
$3,818.00
40
104
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-40-230-000000
$5,948.00
50
130
26.25”H x 12.5”W x 10.75”D
24.625”H x 5”W
CH-ESX-K-50-230-000000
$6,084.00
60
154
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-60-230-000000
$6,697.00
75
192
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-75-230-000000
$8,529.00
100
248
34.25”H x 16.5”W x 11.5”D
32.625”H x 9”W
CH-ESX-K-100-230-000000
$9,326.00
125
312
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-125-230-000000
$26,925.00
150
360
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-150-230-000000
$27,576.00
200
480
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-200-230-000000
$30,957.00
250
602
41.25”H x 29.25”W x 14.40”D
31.56”H x 27.56”W
CH-ESX-K-250-230-000000
$34,391.00
* If CPT option is NOT chosen for 0.25 to 15 HP, enclosure overall size will be 18”H X 11”W X 9.125”D (mounting dimensions 16.375”H X 3.625”W) and a
$150 deduction can be taken from the corresponding list price.
Units are shipped with overload relays sized for standard NEMA rated motors with a service factor of 1.15, running at normal speeds and with
Full Load Amp (FLA) rating as shown in the table on page 5. For non-standard motors or motors with service factors less than 1.15, contact
CORDYNE with the motor nameplate rating so the overload relay can be properly sized.
Non-Standard Options: Many additional Options such as Control Relays for “Dry Circuit” control from PLC’s, Timers, Remote Operating
Stations, etc., are available. Contact CORDYNE for those special requirements. We can make any custom modification or addition to suit
your application.
UL 508A & UL 1203 Certification Optional. Available upon request.
Please contact factory for pricing information.
46
SPECIFICATIONS AND PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
CORDYNE, INC., 9820 DRYSDALE LN, HOUSTON, TEXAS 77041, 1-800-324-1484 OR 713-460-5151 FAX 713-460-5186 WWW.CORDYNE.COM | WWW.STORE.CORDYNE.COM
COPYRIGHT © 2013 CORDYNE, INC. All Rights Reserved.