public auction - Maynards Industries
public auction - Maynards Industries
public auction - Maynards Industries
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
EQUIPMENT SURPLUS TO ON-GOING OPERATIONS<br />
PUBLIC AUCTION<br />
TUES, MAR. 16 TH 2010 @ 10AM<br />
PREVIEW & INSPECTION: MONDAY, MARCH 15 FROM 9AM-5PM or by appointment<br />
Internet<br />
Bidding Available<br />
REGISTER AT<br />
maynards.com<br />
chino, california<br />
late model woodworking equipment<br />
2 buildings - over 200,000 sq. ft. manufacturing area<br />
2007<br />
2004<br />
HOMAG OPTIMA KAL 310 EDGE BANDER<br />
weeke optimat BHC 350 cnc drill<br />
2005 2006<br />
weeke bst 500 cnc borer<br />
dmc unisand k<br />
<strong>Industries</strong> Ltd.<br />
Auctions • Liquidations • Appraisals<br />
5409 Eglinton Ave. West<br />
Suite 202<br />
Toronto ON M9C 5K6<br />
www.maynards.com<br />
Tel: (416) 242-3560<br />
Fax: (416) 242-5085<br />
Idle Assets<br />
<strong>Maynards</strong> Specializes in Asset Conversion of Industrial<br />
Equipment and Commercial Inventories. We offer:<br />
Cash • Guarantees • Commission • Confidential Appraisals<br />
5 Offices To Serve You www.maynards.com
PUBLIC AUCTION<br />
auto<br />
rear<br />
load<br />
LATE MODEL WOODWORKING EQUIPMENT<br />
2003 giben Y3000 SPT panel saw<br />
DATE: Tuesday, March 16, 2010 at 10:00am<br />
PREVIEW: Mon, Mar. 16 from 9am-5pm or by appointment<br />
LOCATION: 13428 Benson Ave., Chino, California<br />
CONTACT: Mike Mcintosh (416) 242-3560 ext. 232<br />
SITE PHONE: (915) 274-5676<br />
DRIVING DIRECTIONS FROM LOS ANGELES<br />
INTERNATIONAL AIRPORT: Head south on World Way<br />
toward West Way; Take the ramp onto S Sepulveda Blvd; Turn<br />
right onto the I-105 E ramp; Keep left at the fork to continue<br />
toward I-105 E and merge onto I-105 E; Take the I-605 S<br />
exit; Keep left at the fork, follow signs for I-605 N and merge<br />
onto I-605 N; Take the exit onto CA-60 E/Pomona Fwy toward<br />
Pomona; Take exit 33 for Central Ave; Turn right at Central Ave;<br />
Turn left at Chino Ave; Turn right at Benson Ave. Approx. 50 miles<br />
BUYERS PREMIUMS: 13.5% On-Site, 16.5% On-Line<br />
(Register at www.maynards.com)<br />
TERMS & CONDITIONS:<br />
Payment: 25% NON-REFUNDABLE deposit on award of bid, balance within 24 hours.<br />
payment is cash, cashier’s CHECK, certified CHECK, wire transfer, company chECK<br />
only if accompanied by a letter from your bank guaranteeing amount of CHECK<br />
for deposit and/or payment in full. no personal CHECKS. full payment must be<br />
made before removal of purchase.<br />
REMOVAL: LAST DAY OF REMOVAL IS TUESDAY, MARCH 30, 2010. and as further defined<br />
in the sale catalogue. everything is sold “as is, where is.” all sales final. cost<br />
and responsibility for removal of purchase remains with the purchaser. every<br />
effort will be maDe to facilitate removal. while quantities and descriptions<br />
are believed to be accurate, the <strong>auction</strong>eer, owners or counsel make no<br />
warranties or guarantees either expressed or implied as to authenticity,<br />
genuineness of, or defects in any lot and will not be held responsible for<br />
any advertising discrepancies or inaccuracies. no warranties whatsoever are<br />
made as to condition, merchantibility or fitness for use of any item. may we<br />
suggest you take full advantage of the preview and inspection period. sale<br />
subject to additions AND deletions<br />
(4) CNC PANEL SAWS<br />
• 2001 Holzma Optimat HPP 82/88 CNC Panel Saw,<br />
Front Load, 12’ Capacity<br />
• 2003 Giben Y 3000 SPT CNC Panel Saw, 14’ Capacity,<br />
Auto Rear Scissor Lift Load<br />
• 2001 Holzma HPL/11/43/16 CNC Panel Saw, Auto<br />
Rear Scissor Lift Load<br />
• 1996 Giben Fastmatic 362.96.330 CNC Panel Saw, 12’<br />
Capacity<br />
EDGE BANDERS<br />
• 2007 Homag Optima KAL 310 3/A/3 CNC Single Sided<br />
Edge Bander w/Ligmatech ZHR 01/L/075 “Boomerang”<br />
Return Conveyor, 16’ Panel Belt Return Conveyor, Power<br />
Control PC 22<br />
• 2004 Homag Optimat KFL 526/6/A3/25 CNC Double-<br />
Sided Edge Bander<br />
• 1996 Homag S9400 KLO/74/GA/20 Single-Sided Edge<br />
Bander<br />
• 1989 Olympic MS 1/64 Single-Sided Edge Bander<br />
• Brandt KD68 Single-Sided Edge Bander<br />
WIDE-BELT SANDERS<br />
• 2006 DMC Unisand K 4-Head CNC Orbital Sander, 53’’<br />
Wide Capacity<br />
• 2006 Costa & Grissom Model A 53” 3-Head Wide<br />
Belt Sander, (2) Vertical Plus (1) Cross Sanding<br />
• 2001 DMC Unisand 2000 2-Head Wide-Belt Sander, 53”<br />
Capacity, PMC Hydra 35 Control<br />
• 1993 Timesavers 237-3 37”, 3-Head Widebelt Sander<br />
• Fladder Pro 1100 Orbital Sander (stored)<br />
MISC. SANDERS<br />
• 1998 Stemas LEV 6-Head Molding Sander<br />
• Crouch 66-48 Sidebelt Sander<br />
• Unique 250 Profile Sander<br />
• Unique 336 Profile Sander<br />
• Shopmade Edge Sander w/4-Roll Feeder<br />
• 10’ Stroke Sander<br />
CNC ROUTERS<br />
• 2003 SCM Routech Ergon Bridge Type<br />
4-Head CNC Router, (12) Tool Changer, (2)<br />
62”x110” Vacuum Tables<br />
• 1999 Heian SR-431-P-2616 CNC Router, (4)<br />
Main Heads w/Piggy Back Drills, w/63”x102”<br />
Vacuum Table<br />
• 1994 Heian SR-431-P-2516 CNC Router, (4)<br />
Main Heads w/Piggy Back Drills, w/63”x96”<br />
Vacuum Table<br />
CNC DRILLING / DOWEL<br />
INSERTION / BORING MACHINES<br />
• 2005 Weeke BST 500 CNC Through Feed<br />
Boring Machine, (7) Hyd. Clamps, (7) Digital<br />
Tool Sections<br />
• 2004 Weeke PP 118 Optimat BHC 350 CNC<br />
Drill, (6) Hold Downs, Vacuum Unit<br />
• 2000 Gannomat 480LS Index 130 Trend<br />
CNC Drilling, Gluing and Dowell Insertion<br />
Machine Machine<br />
• 2005 Gannomat 470 CNC Drilling, Gluing<br />
and Dowell Insertion Machine Machine<br />
2001 holzma hpl/11/143/16<br />
1996 GIBEN FASTMATIC PANEL SAW<br />
2001 HOLZMA OPTIMAT HPP 82/88
2006 2006<br />
2006 COSTA & GRISSOM MODEL A 2001 dmc unisand 2000 2006 dmc unisand k<br />
4-head<br />
CNC OPTIMIZING SAW<br />
• 2001 Grecon Dimter 104R<br />
CNC Optimizing Chop Saw<br />
Line, In/Outfeed Tables<br />
CNC RIPSAW<br />
• 2002 Raimann KR 310M<br />
Profirip CNC Multi Ripsaw<br />
MOLDER<br />
• 2001 SCM Topset 23XL<br />
6-Head Head Molder, Sound<br />
Enclosure<br />
TENONERS<br />
• 2001 SCM Concept 2000D<br />
8-Head Double End Tenoner,<br />
2600mm Opening<br />
• 2001 Balestrini Pico<br />
Round End Tenoner<br />
MORTISER<br />
• 2002 Balestrini Micron 2-Head Slot<br />
Mortiser<br />
CLAMP CARRIER<br />
• 2006 Taylor CM-6 6 Section Clamp<br />
Carrier, Air Tightening, 40” Clamps, s/n CM-<br />
804-04<br />
DRILLING / DOWELL INSERTION<br />
EQUIPMENT<br />
• (6) 2001 Ganner Gannomat 272<br />
Automatic Drilling and Dowell Insertion<br />
Machines for Hinges<br />
• Morbidelli Globo Universal Boring<br />
Machine<br />
• SCMI MB 63 32mm Boring Machine<br />
• Unique 250 Horiz. Shaping/Boring Machine<br />
• (2) Ganner Gannomat Optima 21 Type 510<br />
Universal Dwell Hole Drilling Machines<br />
MELAMINE PRESS LINE<br />
• 1996 Sennerskov 35H-57114-1-12-HO 4’x8’ Auto<br />
Melamine Press (re-built in 2006) Ital infeed Stacker, Ital<br />
Press Brush Machine, Ital Auto Vacuum Sheet Stacker<br />
VENEER EQUIPMENT<br />
• Seibu PVC Membrane Press, 60”x108” Top and Bottom<br />
Heated Platens, Auto Feed Through and Pedestal<br />
Controls<br />
• 1997 Burkle BTF-1634/60 Twin PVC Thermofoiler,<br />
Seimens Programmable Control<br />
• 1998 Italpresse P-336-7 Veneer Hot Press, 4’x11’<br />
Heated Platens, PVC Controls, 8 Cylinders<br />
• Savi HFK 260-HD 2600mm Veneer Guillotine<br />
• 1996 Casati Top 3200mm Veneer Guillotine<br />
• 2003 Deihl VS 81 Tapeless Veneer Splicer<br />
• Midwest 4’x6’ Cold Press<br />
• (2) black Bros. Glue Spreaders, 60” & 24”<br />
• Ott JV 2513 Hyd. Cold Press, 40”x72” Cap.<br />
• Ritter 5’x10’ Air Clamping Table<br />
FINISHING<br />
EQUIPMENT<br />
• Cefla/Barberan<br />
Finishing line Featuring:<br />
Venjakob HGS-SIME 2-Head<br />
Paint Sprayer/Cefla FUN-<br />
2-5500-150 Vertical Pallet<br />
Type Gas Fired Oven/<br />
Barberan RAB-8-1 300<br />
Dual Auto Spray Station,<br />
Kremlin Micro Cyclone Triple<br />
Metering Pump System<br />
• (10) Hi-Tech Paint Spray<br />
Booths - 10’x12’x8’<br />
• 2002 Makor FIL/HE LF-4 UV<br />
Vacuum Finishing Machine,<br />
Auto In/Out Feed, Makor<br />
Programmable Control<br />
• GTS Energy DH 037/40 Hot<br />
Oil Boiler<br />
2004 2007<br />
homag kfl 526/6/a3/25 double-sided edgebander<br />
homag kal 310 cnc edgebander<br />
2007<br />
unique 250 borer homag s9400 edgebander ligmatech return conveyor
cnc<br />
2005<br />
GANNOMAT INDEX TREAD 480 LS<br />
WEEKE BST 500 BORER<br />
2004<br />
2005<br />
WEEKE PP 118 OPTIMAT DRILL GANNOMAT CNC 470<br />
cnc<br />
ENVIRONMENTAL<br />
EQUIPMENT<br />
• (2) Airex RETOX--20-37.5-<br />
RT095 Regenerative Thermal<br />
Oxidizers, 150HP Main Blower,<br />
Auxilliary Blower, AB Panelview<br />
Control, 11.2 Million BTU Burner<br />
AUTOMATIC PACKAGING<br />
LINES<br />
• (3) 2001/98/93 CPC SAP-3L-<br />
ARM 30”x96” Auto Feed Through<br />
Hydraulic Case Clamps, CPC<br />
2500 Plastic Wrapper w/36”x40”<br />
Heat Tunnels, Auto Feed Through<br />
Belt Conveyors<br />
SHAPERS / PLANERS<br />
• (2) 2006 SCM T-130 Single Head<br />
Shaper w/4 Roll Feeders<br />
• SCM T-130N Single Head Shaper<br />
• SCMI S630 Planer<br />
BANDSAWS &<br />
MISC. SAWS<br />
• Spia 800G Vertical Bandsaw<br />
• Western Pneumatic Chop<br />
Saw w/Tiger Stop<br />
• Omega/Dewalt Radial Arm<br />
Saws<br />
• 2-Head Mitre Saw<br />
• (15) Dewalt Mitre Saws<br />
• CTD Abrasive Mitre Saw<br />
TABLESAWS<br />
• (2) Altendorf F-45 Rolling Tablesaws<br />
• 1997 Sicar Express 32 10’ Rolling<br />
Tablesaw<br />
• SCMI SI 300S Rolling Tablesaw<br />
• Jet Tilting Arbor Table Saw<br />
MISC. WOODWORKING EQUIP.<br />
• Dodds D-8532 112 Automatic Dovetailer,<br />
15-Spindle<br />
• OMEC F8 Dovetail Milling Machine<br />
• (8) Denray/Dynabride Downdraft<br />
Sanding Tables<br />
• Unique 250MC Raised Door Panel Machine<br />
• (8) Hydraulic Scissor Lifts from 2’x4’- 4,000<br />
lb. to 4’x8’- 6,000 lb. cap.<br />
DUST COLLECTORS<br />
• Torit 376RFW12 200 HP Dust Collector,<br />
Bottom Screw Feed Loader<br />
• Donaldson Day 484RFW12 250 HP Dust<br />
Collector, Drop Feed<br />
• Donaldson 40 HP Dust Collector<br />
COMPRESSORS<br />
• 2005 Atlas Copco GA 75 100HP, Rotary<br />
Screw Compressor<br />
• 2000 Atlas Copco GA 55 75HP, Rotary Screw<br />
• Atlas Copco GA 45 50 HP, Rotary Screw<br />
• Borge S101, Rotary Screw Compressor<br />
• Aircel VF 300 Air Dryer<br />
• 2004 Atlas Copco FX 13 Air Dryer<br />
• Zeks 500-HSF-A400 Heat Sink Air Dryer<br />
1OF2<br />
4-HEAD<br />
12 TOOL<br />
CHANGER<br />
2003<br />
1999 heian 431p cnc router scm routech cnc bridge router
melamine press line<br />
rebuilt<br />
in 2006<br />
burkle pvc thermoformer sennerskoV press ital vacuum stacker<br />
makor uv finishing line<br />
seibu veneer membrane press<br />
ital p336/7 hot press savi hfk-260 guillotine diehl vs81 veneer splicer<br />
auto packaging lines<br />
1OF2<br />
cpc auto through feed hydraulic press & heat tunnel<br />
1OF3<br />
airex regenerating thermal oxidizer<br />
paint finishing line<br />
paint spray booths<br />
1OF10
2006 cnc<br />
2002 RAIMANN CNC RIPSAW TAYLOR CLAMP CARRIER 2001 GRECON OPTIMIZING CHOP SAW<br />
SCM CONCEPT 2000 DE TENONER<br />
2001 SCM TOPSET 23XL 6-HEAD MOLDER<br />
FORKLIFTS /<br />
SCISSOR LIFT<br />
• Toyota 52-6FGCU 35<br />
7,000 lbs. Cap. Forklift,<br />
LGP, 187’’ Lift<br />
• (4) Toyota 4,000 lbs.<br />
Cap. Electric Pallet Truck<br />
• Skyjack 4626 Scissor<br />
Lift<br />
• MEC 2034 Ht Scissor Lift<br />
TRUCKS<br />
• (3) 1999/1996/1995<br />
International 4700<br />
4x2 26’ Straight Trucks,<br />
DT 466E, Automatic<br />
MAINTENANCE<br />
DEPARTMENT<br />
• Kent KLS 1540 Engine<br />
Lathe, 1800 RPM, 2.5”<br />
Spindle<br />
• Enco 100 Vertical Milling<br />
Machine<br />
• 2005 Rutland 12”x16”<br />
Portable, Horiz. Bandsaw<br />
• Miller 250 Welder<br />
• Riggid 1822-I Pipe Threader<br />
• Drill Presses, Hyd. Filtration<br />
Units, hd & Rolling Tool<br />
Storage Cabinets, Arbour<br />
Press, Misc. Measuring<br />
Equip.<br />
WAREHOUSE EQUIPMENT<br />
• Planar Inventory and Work Center<br />
Computerized Planning Systems • Pallet<br />
Wrapper • (7) 24’ Wood Waste Roll-Off<br />
Containers • 12’ Mini Steel Container<br />
w/Tool Decks • (6) 40’ Sea Containers<br />
• Harmony Hyd. Trash Compactor •<br />
Landa Pressure Washer • Galbreath<br />
Vertical Cardboard Compactor • (Over<br />
50 Sections) Pallet Racking to 20’<br />
• Material Storage Racking • (10)<br />
Flammable Paint Cabinets • Portable<br />
Warehouse Stairs • (15) Portable Self<br />
Dumping Bins • Fiberglass & Aluminum<br />
Ladders • Fridge, Barrel & Parts Dollies •<br />
Aluminum Dock Plates<br />
CONVEYOR<br />
• Over 400’ Power Belt Conveyor to 48’’ Wide<br />
• Over 1500’ of Roller Conveyor to 24’’ Wide<br />
STORES / SPARE PARTS<br />
• Large Crib Inventories Featuring: Hyd.,<br />
Electrical & Mechanical Fittings • Large Qty of<br />
Saw Blades, Carbide Tipped Blades, Bevel Saw<br />
Blades, Scoring Blades • Large Qty of Dado,<br />
Milling & Planing Kits for Saws & Shapers •<br />
Large Qty of Bar & Pipe Clamps • Large Qty<br />
of Brads, Pins & Staples • Qty of Melamine,<br />
Plywood & Rough Lumber • Large Qty of<br />
Cabinet Hardware-Hinges, Slides, Base Plates<br />
• Safety Equipment-Goves, Belts, Glasses, Etc.<br />
• Glues, Edgebanding, Sandpaper<br />
POWER<br />
TOOLS<br />
• Senco Air<br />
Nailers & Staplers<br />
• Jig Saws,<br />
Power Drills,<br />
Orbital, Palm<br />
and Hand Belt<br />
Sanders, Circular<br />
Saws • (12)<br />
Dewalt Portable<br />
Table Saws<br />
OFFICE &<br />
COMPUTER<br />
EQUIPMENT<br />
1OF2<br />
1OF2<br />
ALTENDORF F-45 TABLE SAW<br />
SCMI S 1300 s RTS<br />
DODDS DOVETAILER<br />
2006 SCM SHAPER<br />
1OF6<br />
SANDING BENCH<br />
GANNOMAT 272<br />
10’ STROKE SANDER<br />
sicar 10’ ROLLING TABLE SAW
250<br />
HP<br />
200<br />
HP<br />
60<br />
HP<br />
BORGE COMPRESSOR/DRYER<br />
AC COMPRESSOR/DRYER DUST COLLECTOR DUST COLLECTOR DUST COLLECTOR<br />
2005 AC GA75 compressor BALESTRINI MORTISER SCMI 630 PLANER BALESTRINI PICO<br />
WASTE ROLL-OFF BINS<br />
KENT LATHE<br />
PORTABLE TABLE/MITRE SAWS<br />
RAW MATERIAL INVENTORY<br />
PALLET RACKING<br />
LARGE QTY. machine TOOLING<br />
available for immediate sale<br />
SCISSOR LIFTS<br />
SEA CONTAINERS<br />
2004 celaschi model 280ds type tsa double-end tenoner<br />
10’, 6-Head, cw/Twin Front Saws, Control Panel and Pendant Control,<br />
480 Volt. Well-Maintained, Maintenance History Readily Available.<br />
Machine located in Vancouver BC<br />
For viewing appointments contact: Mike Seibold (604) 675-2227<br />
TOYOTA 7,000 LB. CAP. FORKLIFT<br />
1999 INTERNATIONAL 4700 VAN TRUCK
PUBLIC AUCTION<br />
Internet<br />
Bidding Available<br />
REGISTER AT<br />
maynards.com<br />
EQUIPMENT SURPLUS TO<br />
ON-GOING OPERATIONS<br />
TUES, MARch 16<br />
10:00 AM<br />
PREVIEW & INSPECTION: MONDAY, MARCH 15 FROM 9AM-5PM<br />
or by appointment<br />
chino, california<br />
2 buildings - over 200,000 sq. ft.<br />
manufacturing area<br />
2006<br />
LATE<br />
2007<br />
dmc unisand k<br />
2005<br />
weeke bst 500 cnc borer<br />
MODEL<br />
CABINET<br />
MFG.<br />
FACILITY<br />
HOMAG OPTIMA KAl 310 EDGE BANDER<br />
2003<br />
scm routech 4-head router<br />
<strong>Industries</strong> Ltd.<br />
Auctions • Liquidations • Appraisals<br />
5409 Eglinton Ave. West<br />
Suite 202<br />
Toronto ON M9C 5K6<br />
www.maynards.com<br />
Tel: (416) 242-3560<br />
Fax: (416) 242-5085<br />
Idle Assets<br />
<strong>Maynards</strong> Specializes in Asset Conversion of Industrial<br />
Equipment and Commercial Inventories. We offer:<br />
Cash • Guarantees • Commission • Confidential Appraisals<br />
5 Offices To Serve You www.maynards.com
Change language