Manual Transmissions of Muncie 2006 - Maynards Industries

1994 1991
12 AVAILABLE 2 AVAILABLE
GLEASON 777 CNC Gear Hobber
MITSUBISHI GC20CNC Gear Hobbers
MITSUBISHI GB20CNC Gear Hobbers
GEAR HOBBERS
• MITSUBISHI GD30 CNC Gear Hobber, hob spindle speed 75-750 RPM, max
table rotational speed 60 RPM, max axial travel 11.8”, distance between work
table and tailstock 11.8”, 5-1000 max work piece teeth/number of hob starts,
5.9 max hob diameter, 9.06” hob length, work piece diameter 11.8”, max diameter
pitch 3.175, 5 axis, Fanuc 18M control, s/n 30065C5, 1999
• (6) MITSUBISHI GD20 CNC Gear Hobbers, hob spindle speed 300-3000 RPM,
max table rotational speed 200 RPM, max axial travel 9.84”, distance between work
table and tail stock 8.886”, 4-1000 max work piece teeth/number of hob starts,
5.12” max hob diameter, 9.06” hob length, table diameter 7.87”, max work piece
diameter 7.9”, max diameter pitch 4.23, 5 axis, Fanuc 18M control,, s/n 20129C5,
20082C5, 20108C5, 20085C5, 20087C5, 20086C5, 20031C5, 1995-1998
• (12) MITSUBISHI GC20 CNC Gear Hobbers, hob spindle speed 150-1000 RPM,
max table rotational speed 150 RPM, max axial travel 9.8”, distance between work
table & tail stock 1.57” to 7.09”, 4-1000 max work piece teeth/number of hob
starts, 5.11” max hob diameter, 9.05” hob length, max work piece dia. 7.9”, max
diameter pitch 4.23, 5 axis, Fanuc OM control, s/n 15552C4, 15551C4, 15550C4,
15548C4, 15546C4, 15535C4, 15580C4, 15541C4, 15540C4, 15539C4 etc, 1994
• (2) MITSUBISHI GB20 CNC Gear Hobbers, Fanuc control, s/n 15222C3,
15223C3, 1991
• MITSUBISHI GB15 Gear Hobber, 5.9” max work diameter, 6.35 diameter pitch
max, 4-999 work teeth, 5.91”-11.7” axial travel, radial range .59”-6.69” max
hob diameter 4.72, s/n 15285C5
• GLEASON Model 777 CNC Gear Hobber, with Allen Bradley 8200 control, s/n
806701
• (5) GLEASON Model 725 Revacycle Gear Hobbers, s/n 764306, 663614,
752301, 663610, 788003
GEAR GRINDER
• REISHAUER Model RZF CNC Gear Grinder, tip diameter 55-250mm, number
of teeth 10-248, module 1.35mm-5mm, max diameter pitch 18.8-5”,
pressure angle 14-30 degree, helix angle 40 degree, work piece length
600mm, outside diameter grinding wheel 400-300mm, grinding wheel
width 25-80mm, grinding wheel bore 203.2mm, 1000-3000 RPM grinding
wheel, s/n 74724, 1998, with Oberlin pressure filter Model OPT-4, s/n
1855D
1999 1998
1998
6 AVAILABLE
MITSUBISHI GD30 CNC Gear Hobber MITSUBISHI GD20 CNC Gear Hobbers REISHAUER RZF CNC Gear Grinder