You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
180° <strong>Hinge</strong><br />
for single cabinets for bending A = 25mm<br />
Page<br />
4 - 170<br />
180˚ hinge for surface<br />
mounted doors.<br />
• RH or LH applicati<strong>on</strong>.<br />
• With M6 threaded stubs for<br />
fastening from inside or<br />
Ø6.4mm countersunk holes<br />
for fastening from outside.<br />
• The door part has 2 stubs,<br />
keeping it in positi<strong>on</strong> during<br />
mounting of the pin.<br />
Material:<br />
• Door- and frame part:<br />
zinc die, chrome plated<br />
or black coated<br />
• Pin: steel, Zinc plated<br />
door gauge 1.5 to 2 door gauge 2.5 to 3.2<br />
(16 to 14ga) (12 to 11ga)<br />
chrome plated black coated chrome plated black coated<br />
a) Frame part with M6 threaded 212-9019 212-9013 212-9519 212-9513<br />
stubs<br />
a 1<br />
) Frame part countersunk 212-9020 212-9014 212-9520 212-9514<br />
Ø6.4 for M6<br />
Versi<strong>on</strong>s with pins made of stainless steel AISI 304 or DELRIN <strong>on</strong> request.<br />
Fitting hardware <strong>on</strong> pages 6-040 and 6-041.<br />
D 09/01/03<br />
A 1/15/03<br />
© copyright by DIRAK / Germany