Screw-on Hinge

120° Concealed Hinge
with “PULL-OUT” door removal
Page
4 - 125
120˚ Concealed Hinge for
surface mounted doors.
• RH or LH application.
• By rotating the 1/4 turn
the pivot pin is released
and the door can be
removed by pulling it out to
the front. This hinge can be
modified into a 180˚ hinge
as shown on page 4-183.
• The modification is on page
4-001.
to a 2 ):
fastening washer is not
used when Ø6.3.
Material:
a), a 1 ) and a 2 )
• all parts: steel,
Zinc plated
b), b 1
) and b 2
)
• Door part and 1/4 turn:
zinc die, Zinc plated
• Frame part: steel,
Zinc plated
Version with WELD-on door part Frame holes Part No.
a) Frame part countersunk for M6 Ø6.3 or M6 243-9003
a 1
) as a), but with fastening washer (if 8 or Ø10) 8 or Ø10 243-9002
a 2
) as a) and a 1
) but with pressed in stud M6 Ø6.3, 8, Ø10 243-9007
and fastening washer if necessary
Version with SCREW-on door part to page 4-123
a) Frame part countersunk for M6 Ø6.3 or M6 243-9009
a 1
) as a), but with fastening washer (if 8 or Ø10) 8 or Ø10 243-9010
a 2
) as a) and a 1
) but with pressed in stud M6 Ø6.3, 8, Ø10 243-9011
and fastening washer if necessary
Stainless steel version on page 7-166.
<strong>Screw</strong>s and nuts on page 6-041.
D 02/10/03
A 11/10/03
© copyright by DIRAK / Germany