Screw-on Hinge

More documents

Recommendations

Info

Concealed Hinge for bending 18 to 20mm (0.709 to 0.787) Page 4 - 118 Concealed Hinge with opening angle min. 125˚. • RH or LH application. • Door bending from 18 to 20mm, frame part can be screwed on. Hinge pin is retained. Material: • Frame part and hinge pin: steel, Zinc plated • Weld-on roll: steel, non plated • Fitting block: PA, black Part No. 216-9015 * included in hinge-set D 09/01/03 A 1/15/03 © copyright by DIRAK / Germany
120° Concealed Hinge for bending 20mm Page 4 - 120 Concealed Hinge for surface mounted doors. • RH or LH application. • Frame part Weld-on or <strong>Screw</strong>-on. • Opening angle 120°. Material: a) and a 1 ) • Frame part and door part: steel, not plated b) and b 1 ) • Frame part: steel, Zinc plated • Door part: steel, not plated to a), a 1 ), b) and b 1 ) • Pins: steel, Zinc plated Part No. standard reinforced Version version version a) Hinge assembly, weld-on, pin without groove 216-9001 216-9020 a 1 ) as a), but pin with groove for retaining ring 216-9009 216-9018 b) Hinge assembly, screw-on, pin without groove 216-9002 216-9021 b 1 ) as b), but pin with groove for retaining ring 216-9010 216-9019 Please order separately: c) Retaining ring DIN 6799 RS4 for versions a 1 ) and b 1 ) 800-0137 Stainless steel version of the hinge on page 7-140 D 12/08/04 A 1/15/03 © copyright by DIRAK / Germany
Page 1 and 2: Tehnika zatvaranja DIRAK Šarke za
Page 3 and 4: Tehnika zatvaranja 5100 RIJEKA, Vuk
Page 5 and 6: METALIKA Tehnika zatvaranja KACIN K
Page 7 and 8: Chapter 4 Index Hinges Chapter 4 In
Page 9 and 10: 120˚ Concealed Hinge for flush/nes
Page 11: Concealed Hinge opening angle about
Page 15 and 16: Door Part (series 243) Scre
Page 17 and 18: 120° Concealed Hinge with “PULL-
Page 19 and 20: 120° Concealed Hinge for door bend
Page 21 and 22: 180˚ Hinge for single cabinets Pag
Page 23 and 24: 180° Hinge 180˚ also with adjacen
Page 25 and 26: 180° Hinge for single cabinets for
Page 27 and 28: 180° Hinge for adjacent doors lift
Page 29 and 30: 180° Screw-on Hin
Page 31 and 32: Screw-on Hinge lif
Page 33 and 34: Screw-on Hinge Pag
Page 35 and 36: Screw-on / Weld-on
Page 37 and 38: Hinge Page 4 - 240 Hinge for flush
Page 39 and 40: Screw-on Hinge for
Page 51 and 52: Polyamide Hinge Lift-off Page 4 - 2
Page 53 and 54: Screw-on Hinge Lif
Page 55 and 56: Hinge 180˚ also with adjacent door
Page 57 and 58: Weld-on Hinge Page 4 - 310 Weld-on
Page 59 and 60: Hinge with PA bushings Page 4 - 320
Page 61 and 62: Screw-on Hinge wit
Page 63 and 64:
Hinge with PA bushings Page 4 - 340
Page 65 and 66:
Screw-on Hinge Lif
Page 67 and 68:
Hinge 3D Page 4 - 350 3D hinge adju
Page 69 and 70:
Hinge Page 4 - 370 (replaces 4-368
Page 71 and 72:
Hinge with springloaded pin Ø4, Ø
Page 73:
Tehnika zatvaranja 51000 RIJEKA, Vu
show all

Screw-on Hinge

Create successful ePaper yourself

Delete template?

Save as template?