cover - Encompass Imaging
cover - Encompass Imaging cover - Encompass Imaging
DCR-TRV33/TRV33E 2-2. CABINET (R) COVER (40E) ASSEMBLY q; Push the Cabinet (R) cover (40E) assembly in the direction of the arrow to remove the three claws. Claws 1 Two screws (M1.7 × 6), lock ace, p2 Caution When remove the Cabinet R cover (39E) to the main body, remove the Cabinet (R) cover (40E) assembly while raising, so that A marked portion must not be damaged. A 2 Screw (M1.7 × 3), lock ace, p2 7 Close the LCD panel 2-4 Caution 5 Raise the Finder in the direction of the arrow 6 Screw (M1.7 × 3), lock ace, p2 4 Two screws (M1.7 × 3), lock ace, p2 3 Open the LCD panel Insert the projected portion of the Cabinet (R) cover (40E) assembly into the cabinet L side of the the chassis. The projected portion The chassis The cabinet L side 9 Remove the projected part 8 Remove the projected part qa Pull out the Cabinet (R) cover (40E) assembly from the main body.
2-3. F PANEL SECTION 3 Open the Cassette lid 7 Remove the F panel section in the direction of the arrow 5 Two screws (M1.7 × 4), lock ace, p2 4 Screw (M1.7 × 4), lock ace, p2 6 Remove the claw 2 Screw (M1.7 × 4), lock ace, p2 8 FP-621 flexible board (36P) 2-5 Caution DCR-TRV33/TRV33E 1 Screw (M1.7 × 4), lock ace, p2 The FP-621 flexible board may be damaged if you remove the F panel section forcibly. Be very careful not to damage the flexible board.
- Page 1 and 2: SERVICE MANUAL Ver 1.3 2003. 11 Rev
- Page 3 and 4: • SUPPLIED ACCESSORIES Make sure
- Page 5 and 6: 5-1-11. MECHANICAL CHASSIS BLOCK AS
- Page 7 and 8: DCR-TRV33/TRV33E 1-2. SELF-DIAGNOSI
- Page 9 and 10: COVER SECTION 2 DISASSEMBLY HELP Th
- Page 11: 2-1. P CABINET (C) ASSEMBLY Caution
- Page 15 and 16: 2-5. CABINET (R) SECTION 4 Three sc
- Page 17 and 18: 2-8. PD-188 BOARD, LCD UNIT 3 Four
- Page 19 and 20: 2-10. BT PANEL/EVF SECTION 1 Screw
- Page 21 and 22: 2-12. LB-085 BOARD (REMOVING OF THE
- Page 23 and 24: 2-14. VA-118 BOARD, LENS SECTION 7
- Page 25 and 26: 2-17. MECHANISM DECK, VC-313 BOARD
- Page 27 and 28: F panel section 40 21 41 20 IC4101
- Page 29 and 30: 2-22.FLEXIBLE BOARDS LOCATION The f
- Page 31 and 32: DCR-TRV33/TRV33E OVERALL SECTION -2
- Page 33 and 34: COVER Link 3. BLOCK DIAGRAMS OVERAL
- Page 35 and 36: DCR-TRV33/TRV33E COVER 3-2. OVERALL
- Page 37 and 38: DCR-TRV33/TRV33E COVER 3-4. OVERALL
- Page 39 and 40: DCR-TRV33/TRV33E COVER 3-6. POWER B
- Page 41 and 42: DCR-TRV33/TRV33E COVER COVER 4-2. S
- Page 43 and 44: COVER Link CD-431 BOARD (CCD IMAGER
- Page 45 and 46: COVER 4-2. SCHEMATIC DIAGRAMS A B C
- Page 47 and 48: COVER For Schematic Diagram • Ref
- Page 49 and 50: COVER For Schematic Diagram • Ref
- Page 51 and 52: COVER For Schematic Diagram • Ref
- Page 53 and 54: COVER For Schematic Diagram • Ref
- Page 55 and 56: A B C D COVER 4-2. SCHEMATIC DIAGRA
- Page 57 and 58: COVER For Schematic Diagram • Ref
- Page 59 and 60: COVER Link 4-3. PRINTED WIRING BOAR
- Page 61 and 62: COVER 4-2. SCHEMATIC DIAGRAMS 4-3.
DCR-TRV33/TRV33E<br />
2-2. CABINET (R) COVER (40E) ASSEMBLY<br />
q; Push the Cabinet (R) <strong>cover</strong> (40E)<br />
assembly in the direction of the arrow<br />
to remove the three claws.<br />
Claws<br />
1 Two screws<br />
(M1.7 × 6),<br />
lock ace, p2<br />
Caution<br />
When remove the Cabinet R <strong>cover</strong><br />
(39E) to the main body, remove the<br />
Cabinet (R) <strong>cover</strong> (40E) assembly<br />
while raising, so that A marked<br />
portion must not be damaged.<br />
A<br />
2 Screw<br />
(M1.7 × 3),<br />
lock ace, p2<br />
7 Close the LCD panel<br />
2-4<br />
Caution<br />
5 Raise the Finder in the<br />
direction of the arrow<br />
6 Screw<br />
(M1.7 × 3),<br />
lock ace, p2<br />
4 Two screws<br />
(M1.7 × 3),<br />
lock ace, p2<br />
3 Open the LCD panel<br />
Insert the projected portion of the Cabinet (R) <strong>cover</strong> (40E)<br />
assembly into the cabinet L side of the the chassis.<br />
The projected<br />
portion<br />
The chassis<br />
The cabinet L side<br />
9 Remove the<br />
projected part 8 Remove the<br />
projected part<br />
qa Pull out the Cabinet (R) <strong>cover</strong> (40E)<br />
assembly from the main body.
Change language