03594 reck-o-lan 75, 85, 95, type n - RECKLI GmbH
03594 reck-o-lan 75, 85, 95, type n - RECKLI GmbH
03594 reck-o-lan 75, 85, 95, type n - RECKLI GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
tp RECK-o-<strong>lan</strong> <strong>75</strong>, <strong>85</strong>, <strong>95</strong> Type N Page 2<br />
Technical data<br />
Basic Component - A<br />
<strong>RECKLI</strong> <strong>GmbH</strong><br />
RECK-o-<strong>lan</strong> Type N<br />
Unit <strong>75</strong> <strong>85</strong> <strong>95</strong><br />
-specific weight g/cm³ 1.12 1.14 1.10<br />
-viscosity at 21° C mPa.s 2300 2000 1800<br />
Hardener component - B<br />
-specific weight g/cm³ 1.09<br />
-viscosity at 21° C mPas 500<br />
Specific weight, polymerized g/cm³ 1,10 1,12 1,12<br />
Mixing ratio by weight parts 2 : 1<br />
Potlife, 200 g mixture at +21° C Minutes 6 5 4<br />
Earliest demoulding at +21° C Hours 24<br />
Full chemical and mechanical loading Days 10-12<br />
Heat resistance<br />
-dry heat ° C 65<br />
-under concrete<br />
24 hours stripping time ° C 60<br />
Shore A - Hardness DIN 53505<br />
-after 24 hours 50 70 82<br />
- after 2 days 65 79 89<br />
- after 4 days <strong>75</strong> <strong>85</strong> 92<br />
- after 1 week 76 86 94<br />
- after 3 weeks 76 86 94<br />
Shore D - Hardness 25 33 39<br />
Shrinkage % 0.1-0.25<br />
Tensile strength DIN 53504 ISO 37 N/mm² 9.5 10.3 10.7<br />
Elongation break DIN 53504 ISO 37 % 470 400 300<br />
Tear resistance DIN 53515 ISO 34 N/mm 28 32 47<br />
These data are typical guide values. They are not destined for the generation of specifications.<br />
-3-<br />
Gewerkenstr. 9a 44628 Herne Germany Tel.: 02323 1706-0 info@<strong>reck</strong>li.com<br />
Fax: 02323 1706-50 www.<strong>reck</strong>li.com
Change language