PRODUCT CATALOG - Merkantile
PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters Z109UI2 DC CURRENT/VOLTAGE ISOLATOR/CONVERTER V 10..40 Vdc 19..28 Vac Power Supply 1 Input Ouput 1 V Z109UI2 is a device that accepts mA/V signals able to convert it into mA/V standard signals. It’s configurable either for monopolar or bipolar inputs and all parameters are configurable through dipswitches. The device can power also all 2-wire sensors. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS General Data Power supply 10..40 Vdc / 19..28 Vac / 50-60 Hz Power consumption 2,5 W Isolation 1.500 Vac (3 way) Power transducers Yes Accuracy 0,1% Response time 35 ms (11 bit)..140 ms (16 bit) Status Indicators Power supply, error, data transmission, data reception, input status Dip- switches Setting EASY_Z109 (PC software) Test-3 (hand held calibrator) Mounting 35 mm DIN rail guide Protection Degree IP20 Operating Temperature -10..+60 °C Dimension (W x H x D) 17.5 x 100 x 112 mm Input Channel Numbers 1 (mV, V) Voltage Bipolar from 75 mV to 20 V Resolution 15 bit + sign Bipolar up to 20 mA (active/passive) Current Resolution 1 μA Output Channel Numbers 1 4 scales: 0..1, 0..5, 0..10, 2..10 V Voltage Min load resistance: 2.000 Ω 2 scales: 0/4..20 mA (active/passive) Current Max load resistance: 600 Ω Standard Approval Norms CE, UL-CSA EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN 50140/141; EN 61010-1 APPLICATION NOTE Sensor ORDER CODES Code Z109UI2 4...20 мА 2-wire power supply Power supply 24 Vac/dc ACCESSORIES & SOFTWARE PM001601 EASY SETUP Programming cable Programming software pg. 98 pg. 98 SIMILAR PRODUCTS 1 2 3 4 5 6 POWER Z109S 7 8 9 10 1112 Description DC current/voltage isolator/converter, Power supply 10..40 Vdc / 19..28 Vac 0...10 V PLC Z109REG2 Universal converter to DC current/voltage isolator converter with alarm output DC current / voltage to DC current/voltage isolator/ converter DC current / voltage to DC current/voltage isolator/ converter (with power for 2-wire sensors) pg. 78 pg. 103 pg. 104 80
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters Z109S DC CURRENT ISOLATOR 10..40 Vdc 19..28 Vac Power Supply 0/4..20 MA 0/4..20 MA 1 Input Ouput 1 Z109S is a device that allows to isolate a mA signals. The device can power also all 2-wire sensors and it can be used to solve also power conflicts into the same mA loop. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS General Data Power supply 10..40 Vdc / 19..28 Vac / 50-60 Hz Power consumption 2,5 W Isolation 1.500 Vac (3 way) Power transducers Yes Accuracy 0,2% Response time < 60 ms Status Indicators Power supply, error, data transmission, data reception, input status Setting - Mounting 35 mm DIN rail guide Protection Degree IP20 Operating Temperature 0..50°C Dimension (W x H x D) 17.5 x 100 x 112 mm Input Channel Numbers 1 Current 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω Output Channel Numbers 1 Current 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω Standard Approval Norms CE, UL-CSA EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN 50140/141; EN 61010-1 APPLICATION NOTE Sensor ORDER CODES Code Z109S 4...20 мА 2-wire power supply Power supply 24 Vac/dc SIMILAR PRODUCTS 1 2 3 4 5 6 POWER Z109S 7 8 9 10 1112 4...20 MA Description DC current isolator, Power supply 10..40 Vdc / 19..28 Vac PLC Z109REG2 Z109UI2 Universal converter to DC current/voltage isolator converter with alarm output DC current / voltage to DC current/voltage isolator/converter Loop powered isolator / universal converter DC current / voltage to DC current/voltage isolator/converter (with power for 2-wire sensors) pg. 78 pg. 80 pg. 102 pg. 104 81
- Page 30 and 31: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 32 and 33: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 34 and 35: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 36 and 37: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
- Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
- Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
- Page 48 and 49: COMMUNICATION INTERFACES> SERIAL CO
- Page 50 and 51: COMMUNICATION INTERFACES> SERIAL CO
- Page 52 and 53: COMMUNICATION INTERFACES> SERIAL CO
- Page 54 and 55: COMMUNICATION INTERFACES> SERIAL CO
- Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
- Page 58 and 59: COMMUNICATION INTERFACES > Wireless
- Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
- Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
- Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
- Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
- Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
- Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
- Page 73: APPLICATIONS AUTOMATICALLY OPENING
- Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
- Page 78 and 79: CONVERTERS & INTERFACES > MULTI-STA
- Page 82 and 83: CONVERTERS & INTERFACES > MULTI-STA
- Page 84 and 85: CONVERTERS & INTERFACES > MULTI-STA
- Page 86 and 87: CONVERTERS & INTERFACES > MULTI-STA
- Page 88 and 89: CONVERTERS & INTERFACES > MULTI-STA
- Page 90 and 91: CONVERTERS & INTERFACES > MULTI-STA
- Page 92 and 93: CONVERTERS & INTERFACES > MULTI-STA
- Page 94 and 95: CONVERTERS & INTERFACES > MULTI-STA
- Page 96 and 97: CONVERTERS & INTERFACES > MULTI-STA
- Page 98 and 99: CONVERTERS & INTERFACES > MULTI-STA
- Page 100 and 101: K-LINE > COMPACT SIGNAL CONVERTERS
- Page 102 and 103: CONVERTERS & INTERFACES > MULTI-STA
- Page 104 and 105: CONVERTERS & INTERFACES > MULTI-STA
- Page 106 and 107: CONVERTERS & INTERFACES > MULTI-STA
- Page 108 and 109: CONVERTERS & INTERFACES > MULTI-STA
- Page 110 and 111: CONVERTERS & INTERFACES > MULTI-STA
- Page 112 and 113: CONVERTERS & INTERFACES > COMPACT S
- Page 114 and 115: CONVERTERS & INTERFACES > COMPACT S
- Page 116 and 117: LOOP POWERED DEVICES > Temperature
- Page 118 and 119: LOOP POWERED DEVICES > Current Tran
- Page 120 and 121: 120
- Page 122 and 123: DISPLAYS AND PANEL MOUNTING UNITS H
- Page 124 and 125: DISPLAYS AND PANEL MOUNTING UNITS S
- Page 126 and 127: DISPLAYS AND PANEL MOUNTING UNITS S
- Page 128 and 129: 128
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters<br />
Z109UI2<br />
DC CURRENT/VOLTAGE ISOLATOR/CONVERTER<br />
V<br />
10..40 Vdc<br />
19..28 Vac<br />
Power<br />
Supply<br />
1 Input Ouput 1<br />
V<br />
Z109UI2 is a device that accepts mA/V signals able to convert it<br />
into mA/V standard signals. It’s configurable either for monopolar<br />
or bipolar inputs and all parameters are configurable through dipswitches.<br />
The device can power also all 2-wire sensors. A 3-way<br />
galvanic isolation among Power supply // input // output circuits<br />
assures the integrity of your datas.<br />
TECHNICAL SPECIFICATIONS<br />
General Data<br />
Power supply 10..40 Vdc / 19..28 Vac / 50-60 Hz<br />
Power consumption 2,5 W<br />
Isolation<br />
1.500 Vac (3 way)<br />
Power transducers Yes<br />
Accuracy 0,1%<br />
Response time 35 ms (11 bit)..140 ms (16 bit)<br />
Status Indicators Power supply, error, data transmission, data reception, input status<br />
Dip- switches<br />
Setting<br />
EASY_Z109 (PC software)<br />
Test-3 (hand held calibrator)<br />
Mounting<br />
35 mm DIN rail guide<br />
Protection Degree IP20<br />
Operating<br />
Temperature<br />
-10..+60 °C<br />
Dimension (W x H x D) 17.5 x 100 x 112 mm<br />
Input<br />
Channel Numbers 1<br />
(mV, V)<br />
Voltage<br />
Bipolar from 75 mV to 20 V<br />
Resolution 15 bit + sign<br />
Bipolar up to 20 mA (active/passive)<br />
Current<br />
Resolution 1 μA<br />
Output<br />
Channel Numbers 1<br />
4 scales: 0..1, 0..5, 0..10, 2..10 V<br />
Voltage<br />
Min load resistance: 2.000 Ω<br />
2 scales: 0/4..20 mA (active/passive)<br />
Current<br />
Max load resistance: 600 Ω<br />
Standard<br />
Approval<br />
Norms<br />
CE, UL-CSA<br />
EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN<br />
50140/141; EN 61010-1<br />
APPLICATION NOTE<br />
Sensor<br />
ORDER CODES<br />
Code<br />
Z109UI2<br />
4...20 мА<br />
2-wire power<br />
supply<br />
Power supply<br />
24 Vac/dc<br />
ACCESSORIES & SOFTWARE<br />
PM001601<br />
EASY SETUP<br />
Programming cable<br />
Programming software<br />
pg. 98 pg. 98<br />
SIMILAR <strong>PRODUCT</strong>S<br />
1 2 3<br />
4 5 6<br />
POWER<br />
Z109S<br />
7 8 9<br />
10 1112<br />
Description<br />
DC current/voltage isolator/converter,<br />
Power supply 10..40 Vdc / 19..28 Vac<br />
0...10 V<br />
PLC<br />
Z109REG2 <br />
Universal converter to DC<br />
current/voltage isolator<br />
converter with alarm output<br />
DC current / voltage to DC<br />
current/voltage isolator/<br />
converter<br />
DC current / voltage to DC<br />
current/voltage isolator/<br />
converter (with power for<br />
2-wire sensors)<br />
pg. 78 pg. 103 pg. 104<br />
80