PRODUCT CATALOG - Merkantile
PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters Z109REG2 HIGH PERFORMANCE UNIVERSAL CONVERTER V Vac / dc Power Supply 1 Input Ouput 1 V Z109REG2 is an advanced universal converter able to manage all analog signals (mA, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and convert / isolate it into mA/V standard signals. The device can be configured through dip-switches, PC software or handheld device. A digital contact is available as ALARM or STROBE (multiplexing). It can be requested with low or high power supply. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS Electrical Specifications Power supply Power consumption Isolation Power transducers Status Indicators Protection Degree 10..40 Vdc / 19..28 Vac / 50-60 Hz 2,5 W 1.500 Vac (3 way) Yes Power supply, error, data transmission, data reception, input status IP20 Thermomechanical Specifications Operating -10..+60 °C Temperature Dimension (W x H x D) 17.5 x 100 x 112 mm Accuracy 0,1% Response time 35 ms (11 bit)..140 ms (16 bit) Dip- switches Setting EASY_Z109 (PC software) Test-3 (hand held calibrator) Mounting 35 mm DIN rail guide Input Channel Numbers 1 (mV, V) Voltage Bipolar from 75 mV to 20 V Resolution 15 bit + sign Current Bipolar up to 20 mA Resolution 1 μA Pt100, Pt500, Pt1000, Ni100, KTY81,KTY84, NTC Rtd Measure 3, 4 wires Range: -200..600 °C Resolution 0,1°C Thermocouple Type J, K, R, S, T, E, B, N Resolution 2,5 μV Potentiometer 500 Ω ..10 kΩ Rheostat 500 Ω..25 kΩ Strobe Alternative to the relay output Output Channel Numbers 1 Voltage 4 scales: 0..1, 0..5, 0..10, 2..10 V Min load resistance: 2.000 Ω Current 2 scales: 0/4..20 mA (active/passive) Max load resistance: 600 Ω Relay Alternative to the strobe NC / NA in case of alarm Standard Approval Norms CE, UL-CSA EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN 50140/141; EN 61010-1 ORDER CODES Code Z109REG2 Z109REG2-H ACCESSORIES & SOFTWARE PM001601 TEST-3 EASY SETUP Programming cable Handheld configurator Programming software pg. 98 pg. 133 pg. 98 SIMILAR PRODUCTS Description High performance universal converter, Power supply 10..40 Vdc / 19..28 Vac High performance universal converter, Power supply 85..265 Vac/Vdc Z109UI2 T121 Loop powered isolator / universal converter DC current / voltage converter Isolated loop powered temperature transmitter pg. 102 pg. 80 pg. 117 78
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters ANALOG UNIVERSAL INPUT mA, V, Ohm, RTD, TC HIGH CLASS ACCURACY 0,1% FAST RESPONSE TIME 35 ms (11 bit + segno) WIDE OPERATING TEMPERATURE -20..+60°C TRANSDUCER POWER SUPPLY 20 Vcd, 20 mA HIGH RESOLUTION 16 bit AUXILIARY CONTACTS Strobe Input SPDT relay Output APPROVALS APPLICATION NOTE MULTIPLEXER STROBE TRIP AMPLIFIER 9..40 Vdc 19..28 Vac Z109REG2 Z109REG2 Z109REG2 SIGNAL RETRANSMISSION 1 SIGNAL RETRANSMISSION 2 24 V Z109REG2 ° 24 V Z109REG2 CONFIGURATION 1- DIP-SWITCHES 2- HANDHELD filter; square root extraction output value configuration 3 - SOFTWARE square root extraction value configuration 79
- Page 28 and 29: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 30 and 31: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 32 and 33: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 34 and 35: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 36 and 37: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
- Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
- Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
- Page 48 and 49: COMMUNICATION INTERFACES> SERIAL CO
- Page 50 and 51: COMMUNICATION INTERFACES> SERIAL CO
- Page 52 and 53: COMMUNICATION INTERFACES> SERIAL CO
- Page 54 and 55: COMMUNICATION INTERFACES> SERIAL CO
- Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
- Page 58 and 59: COMMUNICATION INTERFACES > Wireless
- Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
- Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
- Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
- Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
- Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
- Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
- Page 73: APPLICATIONS AUTOMATICALLY OPENING
- Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
- Page 80 and 81: CONVERTERS & INTERFACES > MULTI-STA
- Page 82 and 83: CONVERTERS & INTERFACES > MULTI-STA
- Page 84 and 85: CONVERTERS & INTERFACES > MULTI-STA
- Page 86 and 87: CONVERTERS & INTERFACES > MULTI-STA
- Page 88 and 89: CONVERTERS & INTERFACES > MULTI-STA
- Page 90 and 91: CONVERTERS & INTERFACES > MULTI-STA
- Page 92 and 93: CONVERTERS & INTERFACES > MULTI-STA
- Page 94 and 95: CONVERTERS & INTERFACES > MULTI-STA
- Page 96 and 97: CONVERTERS & INTERFACES > MULTI-STA
- Page 98 and 99: CONVERTERS & INTERFACES > MULTI-STA
- Page 100 and 101: K-LINE > COMPACT SIGNAL CONVERTERS
- Page 102 and 103: CONVERTERS & INTERFACES > MULTI-STA
- Page 104 and 105: CONVERTERS & INTERFACES > MULTI-STA
- Page 106 and 107: CONVERTERS & INTERFACES > MULTI-STA
- Page 108 and 109: CONVERTERS & INTERFACES > MULTI-STA
- Page 110 and 111: CONVERTERS & INTERFACES > MULTI-STA
- Page 112 and 113: CONVERTERS & INTERFACES > COMPACT S
- Page 114 and 115: CONVERTERS & INTERFACES > COMPACT S
- Page 116 and 117: LOOP POWERED DEVICES > Temperature
- Page 118 and 119: LOOP POWERED DEVICES > Current Tran
- Page 120 and 121: 120
- Page 122 and 123: DISPLAYS AND PANEL MOUNTING UNITS H
- Page 124 and 125: DISPLAYS AND PANEL MOUNTING UNITS S
- Page 126 and 127: DISPLAYS AND PANEL MOUNTING UNITS S
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters<br />
ANALOG<br />
UNIVERSAL INPUT<br />
mA, V, Ohm,<br />
RTD, TC<br />
HIGH CLASS<br />
ACCURACY<br />
0,1%<br />
FAST RESPONSE<br />
TIME<br />
35 ms<br />
(11 bit + segno)<br />
WIDE OPERATING<br />
TEMPERATURE<br />
-20..+60°C<br />
TRANSDUCER<br />
POWER SUPPLY<br />
20 Vcd, 20 mA<br />
HIGH<br />
RESOLUTION<br />
16 bit<br />
AUXILIARY<br />
CONTACTS<br />
Strobe Input SPDT<br />
relay Output<br />
APPROVALS<br />
APPLICATION NOTE<br />
MULTIPLEXER STROBE<br />
TRIP AMPLIFIER<br />
<br />
9..40 Vdc<br />
19..28 Vac<br />
<br />
<br />
<br />
Z109REG2<br />
<br />
<br />
<br />
<br />
<br />
Z109REG2<br />
<br />
<br />
<br />
<br />
<br />
Z109REG2<br />
<br />
<br />
SIGNAL RETRANSMISSION 1<br />
SIGNAL RETRANSMISSION 2<br />
<br />
<br />
<br />
<br />
24 V<br />
<br />
<br />
<br />
<br />
<br />
Z109REG2<br />
<br />
<br />
<br />
° <br />
24 V<br />
<br />
<br />
<br />
Z109REG2<br />
<br />
<br />
<br />
CONFIGURATION<br />
1- DIP-SWITCHES<br />
<br />
<br />
<br />
<br />
2- HANDHELD<br />
<br />
filter; square root extraction<br />
<br />
<br />
output value<br />
<br />
<br />
<br />
<br />
configuration<br />
3 - SOFTWARE<br />
<br />
square root extraction<br />
<br />
<br />
value<br />
<br />
<br />
<br />
<br />
configuration<br />
79
Change language