PRODUCT CATALOG - Merkantile
PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile
COMMUNICATION INTERFACES> SERIAL CONVERTERS RS485↔USB SERIAL CONVERTER RS485 USB Power K107USB is an interface able to implement a RS485 serial port by using a PC USB port. The available drivers will recognize the serial interface as a standard serial port; so the use of the product is directly allowed through any software able to communicate with the standard serial ports of the operating system (COM1, COM2, etc). RS485 and USB ports are isolated from each other at 1500 V. TECHNICAL SPECIFICATIONS General Data Power supply Hot swapping Max current consumption Rejection Settings Filter Via USB port Yes 60 mA 50 – 60 Hz (configurable) DIP switches Insertable Dimensions (w x h x d) 6,2 x 93,1 x 102,5 mm Isolation 1,5 kVac (USB // RS485) Isolation technique Digital (optocoupler) Data processing 32 bit floating point Colour Black Enclosure PBT Weight 45 g Operating temperature -20..+65 °C Connections Clamp terminals / bus Protection degree IP20 Channels 1 input, 1 output Power ON Status indicators Data Inverted connection Compliance to USB 1.1 and 2.0 Embedded functions Plug&play for WIN 98, 2000 and XP Multiple connection on the same PC Approvals CE Norms EN 61010-1, EN 60742, EN 61000-2, EN 61000-4 DATA X SIDE Type DATA Y SIDE Type SERIAL USB interface, standard USB 1.0/ 2.0 compliance, USB A and MINI USB B connection SERIAL RS485, max 31 nodes, spring cage terminal block APPLICATION NOTE Code K107USB ORDER CODES SIMILAR PRODUCTS RS485↔USB serial converter (desk) Description RS485↔USB serial converter (din mounting), drivers and cable included S107USB S117P1 Z107 S107P USB↔RS485/RS232/ RS232↔RS485/422 TTL serial isolator/ serial isolator/ converter (desk) converter RS232↔RS485/422 serial isolator/ converter (desk) pg. 49 pg. 51 pg. 47 pg. 48 54
COMMUNICATION INTERFACES > Fiber Optic Converters Z107FO OPTICAL FIBER↔ RS232/RS485 12,4Vdc / 12..28 Vac Power Supply Fiber Optic Z107FO is a RS232 and RS485 signal repeater through optical fiber. The device can be used to increase a number of nodes connection into the same logical bus, and its lenght can be extended up to 2 Km. TECHNICAL SPECIFICATIONS General Data Power supply 12,4 Vdc, 12..28 Vac (50..60 Hz) Power Consumption 1,2 W Status Indicator Serial Communication and optical fiber status Operating Temperature -30..+60 °C Storage Temperature -30..+85 °C Humidity 30..90% non condensing Dimension (W x H x D) 17,5 x 100 x 112 mm Weight 140 g Enclosure PBT, black Mounting 35 mm DIN rail guide Settings DIP-switch (baud rate, parity, serial port, bit stop, termination) Conformity CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742 Communication Ports RS232 RS485 / CAN Ethernet Optical Fiber Speed Delay Time DB9F connector (COM) Removable terminal block IDC10 back connector for Z-PC DIN backplane DB9F (COM) Multimodal mode (62,5/125 or 50/125 μm) Frontal connector ST/ST From 1.200 to 115.200 bps 160 – 240 ms (9.600 bps) 145 – 155 ms (115.200 bps) APPLICATION NOTE ORDER CODES Code Z107FO Description Optical fiber↔serial (RS232/RS485) converter, 12..40 Vdc 12..28 Vac ACCESSORIES & SOFTWARE SIMILAR PRODUCTS Z-PC FO Fiber Optic cable with ST/ST connectors, L=2 m ZC-107FO Fiber optic↔CAN repeater converter pg. 56 55
- Page 3 and 4: PRODUCT CATALOG/INDEX 1 2 3 4 I/O M
- Page 5: PRODUCT CATALOG/INDEX 7.3 Temperatu
- Page 8 and 9: I/O ModBUS SYSTEMS Z-PC LINE Z-PC L
- Page 10 and 11: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 12 and 13: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 14 and 15: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 16 and 17: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 18 and 19: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 20 and 21: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 22 and 23: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 24 and 25: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 26 and 27: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 28 and 29: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 30 and 31: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 32 and 33: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 34 and 35: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 36 and 37: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
- Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
- Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
- Page 48 and 49: COMMUNICATION INTERFACES> SERIAL CO
- Page 50 and 51: COMMUNICATION INTERFACES> SERIAL CO
- Page 52 and 53: COMMUNICATION INTERFACES> SERIAL CO
- Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
- Page 58 and 59: COMMUNICATION INTERFACES > Wireless
- Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
- Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
- Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
- Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
- Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
- Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
- Page 73: APPLICATIONS AUTOMATICALLY OPENING
- Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
- Page 78 and 79: CONVERTERS & INTERFACES > MULTI-STA
- Page 80 and 81: CONVERTERS & INTERFACES > MULTI-STA
- Page 82 and 83: CONVERTERS & INTERFACES > MULTI-STA
- Page 84 and 85: CONVERTERS & INTERFACES > MULTI-STA
- Page 86 and 87: CONVERTERS & INTERFACES > MULTI-STA
- Page 88 and 89: CONVERTERS & INTERFACES > MULTI-STA
- Page 90 and 91: CONVERTERS & INTERFACES > MULTI-STA
- Page 92 and 93: CONVERTERS & INTERFACES > MULTI-STA
- Page 94 and 95: CONVERTERS & INTERFACES > MULTI-STA
- Page 96 and 97: CONVERTERS & INTERFACES > MULTI-STA
- Page 98 and 99: CONVERTERS & INTERFACES > MULTI-STA
- Page 100 and 101: K-LINE > COMPACT SIGNAL CONVERTERS
- Page 102 and 103: CONVERTERS & INTERFACES > MULTI-STA
COMMUNICATION INTERFACES > Fiber Optic Converters<br />
Z107FO<br />
OPTICAL FIBER↔ <br />
RS232/RS485<br />
12,4Vdc / 12..28 Vac<br />
Power<br />
Supply<br />
Fiber Optic<br />
Z107FO is a RS232 and RS485 signal repeater through optical<br />
fiber.<br />
The device can be used to increase a number of nodes connection<br />
into the same logical bus, and<br />
its lenght can be extended up to 2 Km.<br />
TECHNICAL SPECIFICATIONS<br />
General Data<br />
Power supply 12,4 Vdc, 12..28 Vac (50..60 Hz)<br />
Power Consumption 1,2 W<br />
Status Indicator Serial Communication and optical fiber status<br />
Operating<br />
Temperature<br />
-30..+60 °C<br />
Storage Temperature -30..+85 °C<br />
Humidity<br />
30..90% non condensing<br />
Dimension (W x H x D) 17,5 x 100 x 112 mm<br />
Weight<br />
140 g<br />
Enclosure<br />
PBT, black<br />
Mounting<br />
35 mm DIN rail guide<br />
Settings<br />
DIP-switch (baud rate, parity, serial port, bit stop, termination)<br />
Conformity CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742<br />
Communication Ports<br />
RS232<br />
RS485 / CAN<br />
Ethernet<br />
Optical Fiber<br />
Speed<br />
Delay Time<br />
DB9F connector (COM)<br />
Removable terminal block<br />
IDC10 back connector for Z-PC DIN backplane<br />
DB9F (COM)<br />
Multimodal mode (62,5/125 or 50/125 μm)<br />
Frontal connector ST/ST<br />
From 1.200 to 115.200 bps<br />
160 – 240 ms (9.600 bps)<br />
145 – 155 ms (115.200 bps)<br />
APPLICATION NOTE<br />
ORDER CODES<br />
Code<br />
Z107FO<br />
Description<br />
Optical fiber↔serial (RS232/RS485) converter, 12..40 Vdc 12..28 Vac<br />
ACCESSORIES & SOFTWARE<br />
SIMILAR <strong>PRODUCT</strong>S<br />
Z-PC FO<br />
Fiber Optic cable with ST/ST connectors, L=2 m<br />
ZC-107FO<br />
Fiber optic↔CAN repeater converter<br />
pg. 56<br />
55