PRODUCT CATALOG - Merkantile
PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile
COMMUNICATION INTERFACES> SERIAL CONVERTERS EASY-USB USB↔TTL CONVERTER UART TTL USB EASY-USB is a serial communication converter that convert the signal from the USB to a standard UART TTL signal and viceversa. EASY-USB can be use to configure a Seneca device that has an UART TTL serial port. Through the installation of a provided driver for yours OS the EASY- USB will be configured as a standard communication port, this allow to use the EASY-USB with any configuration software that exploit the serial standard port (COM1, COM2, etc ). TECHNICAL SPECIFICATIONS General Data Power supply Connection modality Protection Degree Operating Temperature Dimension (W x H x D) SERIAL UART TTL Connector Voltage level for TTL Baud rate SERIAL USB 5V from PC up to 100 mA From USB IP20 -10 °C.. +65 °C 84 x 21 x 17 mm RJ11 5 V 300 bps up to 250 kbps Connector USB A Type Standard 1.0, 1.1, 2.0 compatibility Standard Windows 98, 98SE, ME, 2000, Server2003, XP. Windows XP 64bit. Windows Vista. O.S. compatibility Windows XP embedded. Windows CE.net 4.2 & 5.0. Mac OS 8, 9, OS-X. Linux con Kernel 2.4.20 or subsequent, with direct support Approval CE Norms EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742 APPLICATION NOTE ORDER CODES Code EASYUSB SIMILAR PRODUCTS Description USB↔TTL converter, drivers and cable included S117P1 S107USB S107P USB↔RS485/RS232/ RS232↔RS485/422 RS485↔USB RS485↔USB serial TTL serial isolator/ serial isolator/ serial converter converter (desk) converter (desk) converter (desk) pg. 54 pg. 51 pg. 49 pg. 48 50
COMMUNICATION INTERFACES> SERIAL CONVERTERS S117P-1 USB↔ RS485, RS232, TTL, Power Supply 12 V USB S117P1 is a converter that realizes a serial connection via RS232, RS485 or TTL, using a USB port on the PC. Through the drivers the operating system treats the serial interface like a standard serial port, allowing the use of the converter through any software that can communicate with the standard serial ports present in the operating system (COM1, COM2, ecc.). RS232, RS485 and TTL ports are electrically isolated from the USB avoiding most of the problems of electrical noises. TECHNICAL SPECIFICATIONS General Data Power supply Power consumption Isolation Modules Power Supply Status Indicators Mounting Protection Degree Through USB port 50 mA 1.500 Vac (3 way) Yes, 12 Vdc available Power supply, data transmission, data reception RS232, RS485 or TTL, using an USB IP20 Operating Temperature -20..+65°C Dimension (W x H x D) 90 x 50 x 25 mm Usable in Windows 98, 2000 and XP Environments. O.S. compatibility Usable in Linux Environment with Kernel 2.4.20 or later, for which the direct support exists. X-SIDE Serial RS232 Communication Serial RS485 Communication, max 32 nodes. SERIAL RS232 connections: DB9 connector TTL connections: RJ-10 connector Y-SIDE USB USB standard 1.0, 1.1 e 2.0 compatible Standard Approvals Norms CE EN61000-6-4/2007, EN61000-6-2/2005, EN61010-1/2001 APPLICATION NOTE ORDER CODES Code S117P-1 Description USB↔RS485/RS232/TTL serial isolator/converter (desk), drivers and cable (RS232, TTL, USB) included SIMILAR PRODUCTS S107USB RS485↔USB serial converter USBRS485 serial converter, desk pg. 54 pg. 49 51
- Page 1 and 2: www.seneca.it PRODUCT CATALOG
- Page 3 and 4: PRODUCT CATALOG/INDEX 1 2 3 4 I/O M
- Page 5: PRODUCT CATALOG/INDEX 7.3 Temperatu
- Page 8 and 9: I/O ModBUS SYSTEMS Z-PC LINE Z-PC L
- Page 10 and 11: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 12 and 13: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 14 and 15: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 16 and 17: I/O SYSTEMS> MODBUS DISTRIBUTED I/O
- Page 18 and 19: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 20 and 21: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 22 and 23: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 24 and 25: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 26 and 27: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 28 and 29: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 30 and 31: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 32 and 33: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 34 and 35: I/O SYSTEMS > CANOPEN DISTRIBUTED I
- Page 36 and 37: I/O SYSTEMS > MODBUS DISTRIBUTED I/
- Page 38 and 39: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 40 and 41: CPU > MULTIFUNCTION CONTROL UNITS >
- Page 42 and 43: 1 2 3 COMMUNICATION INTERFACES> ETH
- Page 44 and 45: COMMUNICATION INTERFACES> ETHERNET
- Page 46 and 47: COMMUNICATION INTERFACES> A/D CONVE
- Page 48 and 49: COMMUNICATION INTERFACES> SERIAL CO
- Page 52 and 53: COMMUNICATION INTERFACES> SERIAL CO
- Page 54 and 55: COMMUNICATION INTERFACES> SERIAL CO
- Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
- Page 58 and 59: COMMUNICATION INTERFACES > Wireless
- Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
- Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
- Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
- Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
- Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
- Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
- Page 73: APPLICATIONS AUTOMATICALLY OPENING
- Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
- Page 78 and 79: CONVERTERS & INTERFACES > MULTI-STA
- Page 80 and 81: CONVERTERS & INTERFACES > MULTI-STA
- Page 82 and 83: CONVERTERS & INTERFACES > MULTI-STA
- Page 84 and 85: CONVERTERS & INTERFACES > MULTI-STA
- Page 86 and 87: CONVERTERS & INTERFACES > MULTI-STA
- Page 88 and 89: CONVERTERS & INTERFACES > MULTI-STA
- Page 90 and 91: CONVERTERS & INTERFACES > MULTI-STA
- Page 92 and 93: CONVERTERS & INTERFACES > MULTI-STA
- Page 94 and 95: CONVERTERS & INTERFACES > MULTI-STA
- Page 96 and 97: CONVERTERS & INTERFACES > MULTI-STA
- Page 98 and 99: CONVERTERS & INTERFACES > MULTI-STA
COMMUNICATION INTERFACES> SERIAL CONVERTERS<br />
EASY-USB<br />
USB↔TTL CONVERTER<br />
UART<br />
TTL<br />
USB<br />
EASY-USB is a serial communication converter that convert the<br />
signal from the USB to a standard UART TTL signal and viceversa.<br />
EASY-USB can be use to configure a Seneca device that has an<br />
UART TTL serial port.<br />
Through the installation of a provided driver for yours OS the EASY-<br />
USB will be configured as a standard communication port, this<br />
allow to use the EASY-USB with any configuration software that<br />
exploit the serial standard port (COM1, COM2, etc ).<br />
TECHNICAL SPECIFICATIONS<br />
General Data<br />
Power supply<br />
Connection modality<br />
Protection Degree<br />
Operating<br />
Temperature<br />
Dimension (W x H x D)<br />
SERIAL UART TTL<br />
Connector<br />
Voltage level for TTL<br />
Baud rate<br />
SERIAL USB<br />
5V from PC up to 100 mA<br />
From USB<br />
IP20<br />
-10 °C.. +65 °C<br />
84 x 21 x 17 mm<br />
RJ11<br />
5 V<br />
300 bps up to 250 kbps<br />
Connector<br />
USB A Type<br />
Standard<br />
1.0, 1.1, 2.0<br />
compatibility<br />
Standard<br />
Windows 98, 98SE, ME, 2000, Server2003, XP.<br />
Windows XP 64bit.<br />
Windows Vista.<br />
O.S. compatibility Windows XP embedded.<br />
Windows CE.net 4.2 & 5.0.<br />
Mac OS 8, 9, OS-X.<br />
Linux con Kernel 2.4.20 or subsequent, with direct support<br />
Approval<br />
CE<br />
Norms EN 61000-6-4, EN 64000-6-2, EN 61010-1, EN 60742<br />
APPLICATION NOTE<br />
ORDER CODES<br />
Code<br />
EASYUSB<br />
SIMILAR <strong>PRODUCT</strong>S<br />
Description<br />
USB↔TTL converter, drivers and cable included<br />
S117P1 S107USB S107P<br />
USB↔RS485/RS232/<br />
RS232↔RS485/422<br />
RS485↔USB<br />
RS485↔USB serial<br />
TTL serial isolator/<br />
serial isolator/<br />
serial converter<br />
converter (desk)<br />
converter (desk)<br />
converter (desk)<br />
pg. 54 pg. 51 pg. 49 pg. 48<br />
50
Change language