PRODUCT CATALOG - Merkantile
Share Embed Flag
Download ePaper

PRODUCT CATALOG - Merkantile

PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile

merkantile.hr
from merkantile.hr More from this publisher
18.01.2015 Views

POWER DEVICES HANDHELD METER CALIBRATOR AC SIGNAL CONVERTERS OVERVOLTAGE PROTECTIONS ISOLATION TEST / FAULT DETECTION POWER CONSUMPTION MONITORING MACHINE SAFETY TEST BENCH POWER QUALITY CALIBRATION & DIAGNOSTIC 130

POWER DEVICES S203T Up to 600 Vdc Up to 100 mA (by CT) Input 10..40 Vdc, 19..28 Vac Power supply Output Communication Modbus mA, V S203T is a complete three-phase network analyser suited for use with up to 600 Vac voltage range and up to 100mA current range (specific CTs must be used). The instrument provides all the following electrical measurable variable: Vrms, Irms, Watt, Var, Va, Frequency, Cosφ. Measurements are availables through Modbus serial communication or through analogue retransmission (ma or V). A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS General Data Power supply 10..40 Vdc; 19..28 Vac (50-60 Hz) Power Consumption 2,5 W Isolation 3.750 Vac (from/to power) 1500 Vac (other circuits) Status Indicator Power supply, error, RS485 communication Accuracy class 0,2% Protection Degree IP20 Operating Temperature -10..+65 °C Dimension (W x H x D) 105 x 89 x 60 mm Weight About 160 g Enclosure Plastic Material UL V0 Mounting 35 mm DIN rail guide Communication Interface Speed Protocol Distance Connectivity Data Memory I/O Channel Numbers Input Type Output Type Programming DIP switches Software Standard 2 wire RS485 RS232, front jack, speed 2400 Baud, data bits 8, Parity: NO, Stop bits:1 Reading every 25 ms ModBUS RTU slave Up to 1.200 m Max 32 nodes EEPROM configuration parameters, retention time 10 years 1 input, 1 output Voltage: max 600 Vac, 50-60 Hz Current: 100mA from CT (S203T) -Single phase -Aron (three phase with N.2 CT) -Four wires (three-phase with N.3 CT)/ current) Rs485 Modbus RTU slave: 1200…115200 baud rate Analogue output: corresponding at Vrms, Irms, Watt, cosφ Address setting Baud rate setting - Selection of inserction type - Selection of 3 phase o 1 phase - Output All parameters Approval CE Norms EN 61000-6-4/2002, EN 61000-6-2/2002, EN 61010, EN 60742 APPLICATION NOTE CT (100 A / 5A) ORDER CODES Code S203T SENECA S203TA Description AC triple phase network analyzer, 100 mA input ACCESSORIES & SOFTWARE 220V TA15 TA25 TA100 EASY SETUP Current transformer (CT) – 15 A / 100 mA Current transformer (CT) – 25 A / 100 mA Current transformer (CT) – 100 A / 100 mA Plug&Play configuration software - - - pg. 98 SIMILAR PRODUCTS S203TA Z203 AC triple-phase network analyzer, 5 Arms input Single phase network analyzer pg. 132 pg. 89 131

POWER DEVICES<br />

<br />

<br />

HANDHELD METER CALIBRATOR<br />

AC SIGNAL CONVERTERS<br />

OVERVOLTAGE PROTECTIONS<br />

ISOLATION TEST<br />

/ FAULT DETECTION<br />

POWER CONSUMPTION<br />

MONITORING<br />

MACHINE<br />

SAFETY<br />

TEST<br />

BENCH<br />

POWER<br />

QUALITY<br />

CALIBRATION<br />

& DIAGNOSTIC<br />

130

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!