PRODUCT CATALOG - Merkantile
PRODUCT CATALOG - Merkantile PRODUCT CATALOG - Merkantile
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters LOOP POWERED UNIVERSAL CONVERTER mA V mV Ohm RTD TC Input Output 4..20 mA K121 is a performant universal converter able to manage all analog signals (mA, mV, V, PT100, Pt1000, Pt500, Ni100, TCs, Ohm) and convert / isolate it into 4..20mA loop powered signal. The output mode (normal/inverted), scale overrange, output in case of fault sensor are selectable parameters available by PC software. A 2-way galvanic isolation among input // output circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS General Data Power supply 7..30 Vdc Power consumption < 660 mW Isolation 1.500 Vac (2 way) Transducer Power Supply No Accuracy 0,1% Response time About 140 ms Status Indicators Power supply, error Setting EASY LP (PC software) Mounting 35 mm DIN rail guide Protection Degree IP20 Operating Temperature -20..+65 °C Dimension (W x H x D) 6,2 x 93 x 102,5 mm Input Channel Numbers 1 Voltage -150…+150 mV (input imped. 10 MΩ) -30...+30V (input imped. 200KΩ) Current -24..24 mA Input impedance 40Ω Rtd Pt100, Pt500, Pt1000, Ni100 Measure 2, 3, 4 wires Thermocouple Type J, K, R, S, T, E, B, N Potentiometer 500 Ω ..10 KΩ Output Channel Numbers 1 Current 4…20mA (loop powered) Standard Approval Norms CE EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN 50140/141; EN 61010-1 APPLICATION NOTE INPUT Custom curve linearization Code K121 Thermocouple (J,K,R,S,T,B,E,N), EN 60584 RTD (Pt100, Pt500, Pt1000, Ni100) 2/3/4 wires Potentiometer 500 Ω -10 KΩ Sensors / Transducers Level Flow Pressure Volume Humidity Speed Acceleration Force … ORDER CODES ACCESSORIES & SOFTWARE EASY USB EASY_LP USB↔UART TTL CONVERTER Programming software pg. 60 pg. 114 SIMILAR PRODUCTS Description Loop powered universal converter V mV mA Ω OUTPUT / POWER SUPPLY 4..20 mA Input Voltage 7..30 Vdc - + PLC with active input Z109REG2 T121 Universal converter to DC current/voltage isolator converter with alarm output Loop powered temperature transmitter Pt100, Ni100 loop powered transmitter pg. 78 pg. 117 pg. 109 102
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters DC CURRENT/VOLTAGE TO DC CURRENT/VOLTAGE ISOLATOR/CONVERTER V Power Supply Input 19,2...30 Vdc Output V K109UI is a device that accepts mA/V signals able to convert it into mA/V standard signals. It’s configurable for input up to 30V (battery voltage monitoring) and all parameters are configurable through dip-switches. The power supply connection is available on the terminals or a special connector (K-BUS) allows a distribution of the power supply to the modules via bus connector. A 3-way galvanic isolation among Power supply // input // output circuits assures the integrity of your datas. TECHNICAL SPECIFICATIONS General Data Power supply 19,2…30 Vdc Power consumption 500 mW Isolation 1.500 Vac (3 way) Transducer Power Supply No Accuracy 0,1% Response time 40 ms Status Indicators Power supply, error Setting Dip Switches Mounting 35 mm DIN rail guide Protection Degree IP20 Operating Temperature -20..+65 °C Dimension (W x H x D) 6,2 x 93 x 102,5 mm Input Channel Numbers 1 Range: 0..10 / 10..0 / 0..5 / 1..5 / 0..15 / 0..30 V (inversion as Voltage well) Impedance: 110 kΩ - 325 kΩ Range: 4..20 / 20..4 / 0..20 / 20..0 mA Current Impedance: 35 Ω Output Channel Numbers 1 Voltage Range: 0..10 / 10..0 / 0..5 / 1..5 V Min load resistance: 2 kΩ Range: 4..20 / 20..4 / 0..20 / 20..0 mA Current Max load resistance: 500 Ω Protection: 25 mA Standard Approval CE Norms EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN 50140/141; EN 61010-1 APPLICATION NOTE Batteries 12/24 Vdc + - (100A) + Max isolation 1,5 kV + Load - - + Batteries Charger ORDER CODES Code Description K109UI DC current / voltage to DC current/voltage isolator/converter SIMILAR PRODUCTS + - Max 4-20 mA ACCESSORIES & SOFTWARE K109UI Backplane for power connection Redundant power supply module pg. 114 pg. 114 Z109UI Z109S DC current / voltage to DC current/voltage isolator/ converter (with power for 2-wire sensors) DC current / voltage to DC current/voltage isolator/ converter DC current isolator pg. 104 pg. 80 pg. 81 103
- Page 52 and 53: COMMUNICATION INTERFACES> SERIAL CO
- Page 54 and 55: COMMUNICATION INTERFACES> SERIAL CO
- Page 56 and 57: COMMUNICATION INTERFACES > Fiber Op
- Page 58 and 59: COMMUNICATION INTERFACES > Wireless
- Page 60 and 61: HMI- Displays > OLED DISPLAY WITH M
- Page 62 and 63: HMI- Displays > OLED DISPLAY WITH M
- Page 65 and 66: RTU, REMOTE TERMINAL UNITS 6 RTU, R
- Page 67 and 68: INTEGRATED SOLUTION ALL-IN-ONE REMO
- Page 69 and 70: RTU, REMOTE TERMINAL UNITS > M-RTU-
- Page 71 and 72: READY-TO-USE A DIGITAL CONTACTS REM
- Page 73: APPLICATIONS AUTOMATICALLY OPENING
- Page 76 and 77: Z-LINE > MULTI-STANDARD SIGNAL CONV
- Page 78 and 79: CONVERTERS & INTERFACES > MULTI-STA
- Page 80 and 81: CONVERTERS & INTERFACES > MULTI-STA
- Page 82 and 83: CONVERTERS & INTERFACES > MULTI-STA
- Page 84 and 85: CONVERTERS & INTERFACES > MULTI-STA
- Page 86 and 87: CONVERTERS & INTERFACES > MULTI-STA
- Page 88 and 89: CONVERTERS & INTERFACES > MULTI-STA
- Page 90 and 91: CONVERTERS & INTERFACES > MULTI-STA
- Page 92 and 93: CONVERTERS & INTERFACES > MULTI-STA
- Page 94 and 95: CONVERTERS & INTERFACES > MULTI-STA
- Page 96 and 97: CONVERTERS & INTERFACES > MULTI-STA
- Page 98 and 99: CONVERTERS & INTERFACES > MULTI-STA
- Page 100 and 101: K-LINE > COMPACT SIGNAL CONVERTERS
- Page 104 and 105: CONVERTERS & INTERFACES > MULTI-STA
- Page 106 and 107: CONVERTERS & INTERFACES > MULTI-STA
- Page 108 and 109: CONVERTERS & INTERFACES > MULTI-STA
- Page 110 and 111: CONVERTERS & INTERFACES > MULTI-STA
- Page 112 and 113: CONVERTERS & INTERFACES > COMPACT S
- Page 114 and 115: CONVERTERS & INTERFACES > COMPACT S
- Page 116 and 117: LOOP POWERED DEVICES > Temperature
- Page 118 and 119: LOOP POWERED DEVICES > Current Tran
- Page 120 and 121: 120
- Page 122 and 123: DISPLAYS AND PANEL MOUNTING UNITS H
- Page 124 and 125: DISPLAYS AND PANEL MOUNTING UNITS S
- Page 126 and 127: DISPLAYS AND PANEL MOUNTING UNITS S
- Page 128 and 129: 128
- Page 130 and 131: POWER DEVICES HANDHELD METER
- Page 132 and 133: POWER DEVICES S203TA Up to 6
- Page 134 and 135: POWER DEVICES > Z-LINE AC POWER CON
- Page 136 and 137: POWER DEVICES > Z-LINE AC POWER CON
- Page 138 and 139: PHOTOVOLTAIC COMPONENTS SENECA MODU
- Page 140 and 141: S PWR ERR COM RX TX 4 5 6 PHOTOVOLT
- Page 142 and 143: PHOTOVOLTAIC COMPONENTS COMPONENTS
- Page 144: www.seneca.it CONTACT AND INFORMATI
CONVERTERS & INTERFACES > MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Analog Converters<br />
<br />
DC CURRENT/VOLTAGE TO DC CURRENT/VOLTAGE ISOLATOR/CONVERTER<br />
V<br />
Power<br />
Supply<br />
Input<br />
19,2...30<br />
Vdc<br />
Output<br />
V<br />
K109UI is a device that accepts mA/V signals able to convert it<br />
into mA/V standard signals. It’s configurable for input up to 30V<br />
(battery voltage monitoring) and all parameters are configurable<br />
through dip-switches.<br />
The power supply connection is available on the terminals or a<br />
special connector (K-BUS) allows a distribution of the power supply<br />
to the modules via bus connector. A 3-way galvanic isolation<br />
among Power supply // input // output circuits assures the integrity<br />
of your datas.<br />
TECHNICAL SPECIFICATIONS<br />
General Data<br />
Power supply 19,2…30 Vdc<br />
Power consumption 500 mW<br />
Isolation<br />
1.500 Vac (3 way)<br />
Transducer Power<br />
Supply<br />
No<br />
Accuracy 0,1%<br />
Response time 40 ms<br />
Status Indicators Power supply, error<br />
Setting<br />
Dip Switches<br />
Mounting<br />
35 mm DIN rail guide<br />
Protection Degree IP20<br />
Operating<br />
Temperature<br />
-20..+65 °C<br />
Dimension (W x H x D) 6,2 x 93 x 102,5 mm<br />
Input<br />
Channel Numbers 1<br />
Range: 0..10 / 10..0 / 0..5 / 1..5 / 0..15 / 0..30 V (inversion as<br />
Voltage<br />
well)<br />
Impedance: 110 kΩ - 325 kΩ<br />
Range: 4..20 / 20..4 / 0..20 / 20..0 mA<br />
Current<br />
Impedance: 35 Ω<br />
Output<br />
Channel Numbers 1<br />
Voltage<br />
Range: 0..10 / 10..0 / 0..5 / 1..5 V<br />
Min load resistance: 2 kΩ<br />
Range: 4..20 / 20..4 / 0..20 / 20..0 mA<br />
Current<br />
Max load resistance: 500 Ω<br />
Protection: 25 mA<br />
Standard<br />
Approval<br />
CE<br />
Norms<br />
EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN<br />
50140/141; EN 61010-1<br />
APPLICATION NOTE<br />
Batteries<br />
12/24 Vdc<br />
+<br />
-<br />
(100A)<br />
+<br />
Max isolation 1,5 kV<br />
+<br />
Load<br />
-<br />
-<br />
+<br />
Batteries<br />
Charger<br />
ORDER CODES<br />
Code Description<br />
K109UI<br />
DC current / voltage to DC current/voltage isolator/converter<br />
SIMILAR <strong>PRODUCT</strong>S<br />
+<br />
-<br />
Max 4-20 mA<br />
ACCESSORIES & SOFTWARE<br />
K109UI<br />
<br />
<br />
Backplane for power connection<br />
Redundant power supply module<br />
pg. 114 pg. 114<br />
Z109UI Z109S<br />
DC current / voltage to DC<br />
current/voltage isolator/<br />
converter (with power for<br />
2-wire sensors)<br />
DC current / voltage to DC<br />
current/voltage isolator/<br />
converter<br />
DC current isolator<br />
pg. 104 pg. 80 pg. 81<br />
103