Progetto1:Layout 1 - Urmet

VIDEO TRANSMISSION
1092/304
1092/316
1092/304 Active balun video receiver (4 channels)
Active balun video receivers (with signal amplification) allow to adapt the impedance
between coax and UP cable. They are particularly suitable for receiving up to
4 video signals (black and white or colour) on UP (Unshielded Twisted Pair) wires.
Suitable for use with passive transceiver 1092/300 or active transmitter 1092/302.
- Compact dimensions for rapid connection to video control apparatuses,
monitors and cameras.
- 4 BNC female outputs, terminal board and RJ45 connector for UTP CAT5 wire
input
- Very easy to use
- Video signal equalisation dip switch (definition and contrast) on each channel
- Video signal level adjustment potentiometer (brightness) on each channel
- Double impedance and interference filter for ensuring better protection
from interference.
- UTP signal input on terminal board or RJ45 connector
- Ready to be wall-mounted.
- Power 12Vdc - max 80 mA (power unit not included).
1092/316 Active balun video receiver (16 channels)
Active balun video receivers (with signal amplification) allow to adapt the impedance
between coax and UP cable. They are particularly suitable for receiving up to
16 video signals (black and white or colour) on UP (Unshielded Twisted Pair) wires.
Suitable for use with passive transceiver 1092/300 or active transmitter 1092/302.
- Compact dimensions for rapid connection to video control apparatuses,
monitors and cameras.
- 16 BNC loop-through female outputs and 4 RJ45 connectors for UTP CAT5 wire
input
- Very easy to use
- Video signal equalisation dip switch (definition and contrast) on each channel
- Video signal level adjustment potentiometer (brightness) on each channel
- Double impedance and interference filter for ensuring better protection
from interference.
- Signal input available on RJ45 connector
- 230Vac power
230 •