Progetto1:Layout 1 - Urmet

PAN AND TILT AND POWER SUPPLY UNITS
VIDEO DISTRIBUTION
1090/726 1 input/ 4 output video distributor
1090/727 1 input/ 8 output video distributor
1090/726
Common features and performance
- Power: 230 Vac
- S/R ratio: › 55 dB
- Weight: 2.2 kg
- Dimensions: 216 (W) x 44 (H) x 240 (D) mm
1090/730 Miniature video distributor
Used for distributing video signal from one camera to up to 4 monitors.
Very small, may be wall mounted or fitted inside a junction box. Must be powered
by power unit 1090/850 using the 12 Vdc output without adapter.
- Power: 15 Vdc 30 mA
- Connections: no BNC connectors required
- Dimensions: 96 (W) x 28 (H) x 65 (D) mm
VIDEO AMPLIFIERS
1090/729
1090/729 1 input/ 1 output video amplifier
- Video input: 1
- Video output: 1
- Linear gain: › 13dB
- Power: 230 Vac
- Weight: 2.2 kg
- Dimensions: 216 (W) x 44 (H) x 240 (D) mm
FREQUENCY SYNTHESIS MODULATOR
1090/868
1090/868 Frequency synthesis modulator
The modulator converts the video signal from a camera into a radio frequency
signal compatible with a television antenna input. The device is provided with
connectors for being fitted on the existing antenna wire and occupying a spare
television channel. The camera signal may be called up on screen with the
selection of the dedicated channel.
- Power: 230 Vac
- Adjustable audio and video by means of trimmer
- Output channel selection band I or band II or hyperband IV or V by means
of dip switch
- Adjustable RF output level
VIDEO CONTROL DEVICES
Colour video compressor
1090/614
1090/614 Colour digital video compressor with motion detector
- Video camera inputs: 4 (1.0 Vpp / 75 ohm)
- VCR video inputs: 1 (1.0 Vpp / 75 ohm)
- Video monitor outputs: 1 (1.0 Vpp / 75 ohm)
- VCR monitor outputs: 1 (1.0 Vpp / 75 ohm)
- Frame rate: Real Time (25 frames per second)
- Resolution: 768 x 576
- 4 alarm inputs, 1 relay alarm output
- Wire cutting surveillance on each channel
- OSD menu in English
- 192 motion detector zones
- Quad and full function still function
198 •