Progetto1:Layout 1 - Urmet

TELEPHONY
SYSTEM ACCESSORIES
1372/99 Analogue dedicated telephone line tester
Device for simple, complete testing of analogue telephone line (dial line
and PABX extension) and of dedicated telephone signals connected to Agorà 2.
3850/1 Supplementary electromechanical telephone ringer
Supplementary electromechanical telephone ringer made of plastic
with metal bell. Power: > 26Vac 20-50Hz.
Installation: wall-mounted or flush-mounted with unified telephone socket.
2841/1 Loud bell ringer 60 Vac, 50 Hz, 120 mm
Loud bell ringer with wall support. Power: 60 Vac, 50 Hz. Diameter 120 mm.
Sound level: > 93 dBA @ 1m. Installation: wall-mounted.
2841/1
4821/1
2841/2 Loud bell ringer 12 Vac, 50 Hz, 120 mm
Loud bell ringer with wall support. Power: 12 Vac, 50 Hz. Diameter 120 mm.
Sound level: > 93 dBA @ 1m. Installation: wall-mounted.
821 Telephone call repeater
Call repeater or traditional door phone repeater with 10-12 Vac and 6 Vac voltage.
Generates a 50Vac call on a max. load of 5 ringers Ref. 2841/1 or /2.
Power: 230 Vac. Installation: bar fitted, 7 DIN modules.
4821/1 ◊ Wireless telephone repeater
The device recognises analogue line calls (local line or PABX extension)
and sends a radio signal to a MISTRAL receiver UTD 4311/2 or 4311/3 located
within the coverage field. The receiver emits the acoustic signal. The device may
be powered by an internal battery or external adapter, such as UTD 1092/800
(12Vdc), also suitable for the receiver UTD 4311/2.
- Open field range: 100 m.
- Degree of protection: IP54.
- Transmission frequency: 868.35 MHz.
- Installation: wall mounted.
- Power: 230Vac from adapter (12 Vdc) or battery 9V (not included)
TELEPHONY
RINGERS
4311/2 Mistral Wireless ringer, range 200 m
Powered by 4 AA batteries 1.5V; 6 selectable ring tones and alarm function.
4311/3 Mistral Wireless ringer, range 150 m
Power: 230Vac; 12 selectable ring tones and alarm function.
4311/2
4311/3
◊ For connecting wireless ringers, see page 59.
• 147