Progetto1:Layout 1 - Urmet

1332/85
1332/82
1382/21
SURGE PROTECTIONS, FILTERS
and system accessories
SURGE PROTECTIONS AND FILTERS
1332/80 Mains surge protection device, 230Vac, 400VA
For maximum efficiency, install the protection on the power line near the device
to be protected. The device will trip in presence of dangerous current surges
on the power line. Max. current 2A. Max. load: 400VA. Installation: wall mounted
on DIN bar, 2 modules. Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1332/85 Mains surge protection device, 230Vac, 4000VA
For maximum efficiency, install the protection on the power line near the device
to be protected. The device will trip in presence of dangerous current surges
on the power line. Use with Ref. 1332/86 filter recommended because
their action is complementary. Max. current 20A Max. load: 4000VA
Installation: DIN bar, 2 modules. Dimensions: 36 (W) x 90 (H) x 58 (D) mm.
1332/86 Mains filtering device, 230Vac, 4000VA
The device prevents the propagation of radio-frequency interference on the power
network which could cause faults to electronic apparatus sensitive to such
interference. For better results, use with protection device Ref. 1332/85
is recommended to exploit their complementary action.
Power: 230Vac - 50Hz Attenuation: 60dB @ 2MHz. Max. current 20A
Max. load: 4000VA Installation: DIN bar, 2 modules.
Dimensions: 36 (W) x 90 (H) x 58 (D) mm.
1332/81 Surge protection device for 1 analogue telephone line
For maximum efficiency, install the protection on the power line near the PABX
to be protected. Specifically, the device must be installed on all dial and extension
lines connecting out of the building or to which electrical devices, such as fax
machines, modems, answering machine, cordless telephones, etc. are connected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted or DIN bar mounted, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1332/82 Surge protection device for 2 analogue telephone lines
For maximum efficiency, install the protection on the power line near the PABX
to be protected. Specifically, the device must be installed on all dial and extension
lines connecting out of the building or to which electrical devices, such as fax
machines, modems, answering machine, cordless telephones, etc. are connected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted or DIN bar mounted, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
1382/21 Surge protection device with “ADSL 2+” filter
The device integrates the functions of a telephone line surge protection
and of a professional ADSL 2 filter (splitter). For maximum efficiency,
install the protection on the power line near the PABX to be protected.
The device will trip in presence of dangerous current surges on the line.
Installation: wall mounted on DIN bar, 2 modules.
Dimensions: 36 (W) x 104 (H) x 75 (D) mm.
146 •