Progetto1:Layout 1 - Urmet

TELEPHONY
GSM interfaces
INNOVATION IS ALSO THE POSSIBILITY OF COMMUNICATING MORE COST-EFFECTIVELY.
“Domus Cell” GSM connect an analogue or traditional analogue line of a PABX
with the mobile GSM network, thus generating mobile-to-mobile traffic (instead of land
line-to-mobile) which allows to save on telephone costs by exploiting better fees.
The device is also useful as back-up emergency line. “Domus Cell FX” and “Domus Cell basic”
can be used to communicate in ease using a table-top telephone also where no land line
is available as long as an adequate GSM mobile network coverage is ensured.
The “Basic” model is ready for managing voice communications while the “FX” model offers
additional services, such as:
- data transmission, SMS and fax from PC via RS232 serial port
- Internet navigation (GPRS class 10, MS class B)
- connection to Fax Group 3 (G3) and ITU-T T.4 and T.30 (ask GSM provider is service
is available) and modem for analogue line with speed of up to 33.6 Kbps (V.34).
A SIM card (3V and 1.8V) for mobile communication like the one used in a normal
GSM telephone is required for operation.
4201/2
4203/1
4201/2** “Domus Cell Fx” GSM interface
The device allows to connect a telephone (BCA) or analogue dial line of a PABX
to the GSM/GPRS mobile network. It provides caller’s ID and is compatible
with all Urmet Domus Agorà PABX switchboards and any BCA telephone.
Services in addition to voice include: data transmission, SMS and fax from PC
via RS232 serial port, Internet (GPRS class 10, MS class B), Group 3 fax
connection and management (the service must be made available by the GSM
network provider).
Power: 230Vac with adapter.
Installation: wall mounted.
Dimensions: 125 (W) x 183 (H) x 42 (D) mm.
4203/1 “Domus Cell Basic” GSM interface
The device allows to connect a telephone (BCA) or analogue dial line of a PABX to
the GSM mobile network (900 and 1800). It provides caller’s ID and is compatible
with all Urmet Domus Agorà PABX switchboards and any BCA telephone. Its
small size and separate antenna ensure maximum installation flexibility.
Connection to PC via USB v.1.1 port.
Power: 230Vac with adapter.
Installation: wall mounted.
Dimensions: 60 (W) x 93 (H) x 27 (D) mm.
TELEPHONY
NOTE: External antenna with 5 m cable UTD1067/014 can be used for particularly critical installations.
** Contact the sales network for availability.
• 145