Tutorial: Patch antenna - Empire

More documents

Recommendations

Info

Step 7 : Antenna tuning 1 1. Switch to Draft mode 2. Select patch at right side (use middle mouse button) 3. Choose Advanced Parameters-Stretch 4. Enter x: dx as shift vector 5. Set parameter range to: Min: -2000 Max: 0 Value:0 Step: 500 and press ‘OK‘ 6. Select patch at left side 7. Choose Advanced->Parameters-Stretch 8. Enter x: -dx as shift vector and confirm with ‘OK‘ 9. Select +Parameters and use the slider bar to change the patch length according to the parameter value serv0, WS, 10/06, 8
Step 8 : Antenna tuning 2 1. Open +Simulation Setup and set ‘End Frequency‘ to 5 GHz 2. Click Convert&Save and close export log window 3. Switch from Draft to Advanced mode 4. Select ‘Optimization control‘ 5. Press ‘Add Optimization‘ 6. Switch to Hosts tab 7. Enable ‘localhost‘ 8. Press ‘Start‘ to start variation serv0, WS, 10/06, 9
Page 1 and 2: Tutorial: Patch antenna Topics: Des
Page 3 and 4: Step 2: Structure check 1. Switch f
Page 5 and 6: Step 4: 2 D Postprocessing results
Page 7: Step 6: Farfield 1. Turn visibility
Page 11 and 12: Step 10 : Array Setup 1 1. Switch t
Page 13 and 14: Step 12: Array antenna Simulation 1

Tutorial: Patch antenna - Empire

Create successful ePaper yourself

Delete template?

Save as template?