Tutorial: Patch antenna - Empire
Tutorial: Patch antenna - Empire Tutorial: Patch antenna - Empire
Step 3: Patch antenna Simulation 1. Click Start Simulation and view the results on screen as the simulation is running. • The microstrip antennna from the template wizard will be automatically meshed and the simulation will be started • During the simulation the time pulses are monitored • After the simulation is finished the s-parameter results are shown serv0, WS, 10/06, 4
Step 4: 2 D Postprocessing results 1. Switch to Impedance Tab and check input impedance 2. Switch to Farfield Tab and check calculated farfield serv0, WS, 10/06, 5
- Page 1 and 2: Tutorial: Patch antenna Topics: Des
- Page 3: Step 2: Structure check 1. Switch f
- Page 7 and 8: Step 6: Farfield 1. Turn visibility
- Page 9 and 10: Step 8 : Antenna tuning 2 1. Open +
- Page 11 and 12: Step 10 : Array Setup 1 1. Switch t
- Page 13 and 14: Step 12: Array antenna Simulation 1
Step 4: 2 D Postprocessing results<br />
1. Switch to Impedance Tab and check input impedance<br />
2. Switch to Farfield Tab and check calculated farfield<br />
serv0, WS, 10/06,<br />
5
Change language