Tutorial: Patch antenna - Empire

More documents

Recommendations

Info

Step 11 : Array Setup 2 1. Open Layers Select +Layers to open Layer overview 2. Turn visibility of Near2FarfieldTrans-layer to ‘ON’ and all other layers to ’OFF’ 3. Select +Structure+Boxes+Box.. to edit the coordinates of the nf2ff box 4. Adjust the box coordinates to: P1 (-10000, -10000,0), P1 (540000,450000,25000) 5. Switch all layers to ‘ON’ 6. Open +Parameters-> +dx and set slider to dx=-500 7. Click Start Simulation serv0, WS, 10/06, 12
Step 12: Array <strong>antenna</strong> Simulation 1. Switch from Draft to Voltage 2. Switch from Voltage to S-Parameters serv0, WS, 10/06, 13
Page 1 and 2: Tutorial: Patch antenna Topics: Des
Page 3 and 4: Step 2: Structure check 1. Switch f
Page 5 and 6: Step 4: 2 D Postprocessing results
Page 7 and 8: Step 6: Farfield 1. Turn visibility
Page 9 and 10: Step 8 : Antenna tuning 2 1. Open +
Page 11: Step 10 : Array Setup 1 1. Switch t

Tutorial: Patch antenna - Empire

Create successful ePaper yourself

Delete template?

Save as template?