Tutorial: Patch antenna - Empire

More documents

Recommendations

Info

Step 9 : Antenna tuning 3 1. Switch from Advanced to S-Parameters 2. Switch to‘Setup‘ tab and press ‚‘reread‘ 3. Press ‚view‘ The variation with dx=-500 reaches the target frequency of 2.45 GHz serv0, WS, 10/06, 10
Step 10 : Array Setup 1 1. Switch to Draft mode 2. Select File->Save as e.g. c:\tutorial1\patch-array 3. Select the patch and the port (use middle mouse button) 4. Choose Advanced->Multiple Copy 5. Enter: dx=90000,dy=120000,dz=0, nx=5,ny=3,nz=0 and press ‘OK‘ 6. Press ‘Zoom extends‘ 7. Open Layers: Select +Layers to open Layer overview 8. Turn visibility of patch-, ports- and Near2FarfieldTrans-layer to ‘OFF‘ and from all other layers to ‘ON‘ 9. Close +Layer and +Simulation Setup 10. Press ‘Ctrl-A‘ to select all objects 11. Draw an Arrow from (0,0) to (530000,440000) 12. Press Modify ’Assign Arrow’ serv0, WS, 10/06, 11
Page 1 and 2: Tutorial: Patch antenna Topics: Des
Page 3 and 4: Step 2: Structure check 1. Switch f
Page 5 and 6: Step 4: 2 D Postprocessing results
Page 7 and 8: Step 6: Farfield 1. Turn visibility
Page 9: Step 8 : Antenna tuning 2 1. Open +
Page 13 and 14: Step 12: Array antenna Simulation 1

Tutorial: Patch antenna - Empire

Create successful ePaper yourself

Delete template?

Save as template?