PRODUCT INTRODUCTION - CNet Technology, Inc.

PRODUCT INTRODUCTION - CNet Technology, Inc. PRODUCT INTRODUCTION - CNet Technology, Inc.

12.11.2012 Views

NETWORK SWITCHES PoE (Power over Ethernet) Switch & Accessory CSH-2402GP 24-Port 10/100Mbps with 2 Gigabit Copper/SFP Ports PoE Switch CSH-2402GP features 24 Power over Ethernet (PoE) ports which follow IEEE 802.3af, supplying up to 15.4 watts per port. This product can convert standard 90~260V/AC power into lowvoltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receive power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding CSH- 2402GP to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore. Moreover, CSH-2402GP supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications. Specifications Standards Ports MAC Address • 4K Buffer Memory • 2.75Mb Forwarding/Filtering Rate Media Support 52 2012 CNet PRODUCT GUIDE • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000BASE SX/LX • IEEE 802.3x Flow Control • IEEE 802.3af Power over Ethernet (PoE) • 24 10/100BASE-T(X) with 24 PSE/PoE Ports • 2 10/100/1000BASE-T copper Ports/ 2 Open SFP Slot • 14880 packets/second per port @ 10Mbps, maximum • 148800 packets/second per port @ 100Mbps, maximum • 1488000 packets/second per port @ 1000Mbps, maximum • 10BASE-T Cat. 3, 4, 5 UTP/STP • 100BASE-TX Cat. 5 UTP/STP • 1000BASE-T Cat.5E UTP/STP Duplex Modes • Support Auto-negotiation and Auto-MDI/MDI-X functions LED Indicators Power Power Output Power Consumption • 390W (Max) • One LED displays Power Status • One LED per port displays Link/ACT • One LED per port displays PoE Status • Internal Full Range Auto-Switching • Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz • 48V/DC Per Port Output – 15.4W Max Per Port • 24 Ports at Full 15.4W Output Standard Environment Key Features • 24-Port 10/100Mbps with IEEE 802.3af PoE Switch • All Ports Supports Auto-MDI/MDI-X and Auto-negotiation Functions • Full wire speed Store-and-Forward technology instantly eliminates bad packets • IEEE 802.3x Flow-Control support for Full- Duplex operation • Operating Temperature: 0° ~ 40°C (32° ~ 104°F) • Storage Temperature: -20° ~ 60°C (-4° ~ 140°F) • Humidity: 10% ~ 90% Non-condensing Dimensions (L x W x H) • 440 x 332 x 44mm (17.32 x 13.07 x 1.73inchs) Certifications • CE, FCC, RoHS

CSH-2402GWP 24-Port 10/100Mbps with 2 Gigabit Copper/SFP Ports PoE Web Smart Switch CSH-2402GWP features 24 Power over Ethernet (PoE) ports which follow IEEE 802.3af, supplying up to 15.4 watts per port. This product can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. By adding CSH-2402GWP to existing networking, installing networking products such as Access Points and IP cameras can be easily managed and set up. Wireless device deployments are easily located with available power outlets and network administrators don’t need to use heavy AC power adapters anymore. Through a Web-based interface, an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and link aggregation to create fat traffic pipelines. Moreover, CSH-2402GWP supports 2 Combo Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or other switching devices for long loop reach applications. Specifications Standards Ports MAC Address • 4K Buffer Memory • 2.75Mb Forwarding/Filtering Rate Media Support • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000BASE SX/LX • IEEE 802.3x Flow Control • IEEE 802.3af Power over Ethernet (PoE) • IEEE 802.1q VLAN (Port Based and Tag Based) • IEEE 803.1p QoS/Class of Service, Priority Protocol • IEEE 802.1x Port Security • IEEE 802.1d Spanning Tree Protocol • IEEE 802.1w Rapid Spanning Tree Protocol • 24 10/100BASE-T(X) with 24 PSE/PoE Ports • 2 10/100/1000BASE-T copper Ports/ 2 Open SFP Slot • 14880 packets/second per port @ 10Mbps, maximum • 148800 packets/second per port @ 100Mbps, maximum • 1488000 packets/second per port @ 1000Mbps, maximum • 10BASE-T Cat. 3, 4, 5 UTP/STP • 100BASE-TX Cat. 5 UTP/STP • 1000BASE-T Cat.5E UTP/STP Smart Feature NETWORK SWITCHES Key Features • 24-Port 10/100Mbps with IEEE 802.3af PoE Switch • Web-based configuration and management • Supports PoE function ON/OFF Remote Control • All Ports Support Auto-MDI/MDI-X and Auto-negotiation Functions • Supports 26-Port VLAN, STP/RTSP, two Trunk Groups • Port VLAN: 24 • Tagged VLAN: 4094 • Trunk Groups: 2 (up to 4 Ports for each group) • PoE function ON/OFF remote Control • STP/RSTP (Spanning Tree and Rapid Spanning Tree Protocol) • MAC Filtering • IGMP Snooping • Broadcast Strom Control • Bandwidth Control • Port Mirroring • Password-Protected Access • Web-based Management Duplex Modes • Support Auto-negotiation and Auto-MDI/MDI-X functions LED Indicators Power PoE (Power over Ethernet) Switch & Accessory Power Output Power Consumption • 390W (Max) Environment • One LED displays Power Status • One LED per port displays Link/ACT • One LED per port displays PoE Status • Internal Full Range Auto-Switching • Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz • 48V/DC Per Port Output – 15.4W Max Per Port • 24 Ports at Full 15.4W Output Standard • Operating Temperature: 0° ~ 40°C (32° ~ 104°F) • Storage Temperature: -20° ~ 60°C (-4° ~ 140°F) • Humidity: 10% ~ 90% Non-condensing Dimensions (L x W x H) • 440 x 332 x 44mm (17.32 x 13.07 x 1.73inchs) Certifications • CE, FCC, RoHS 2012 CNet PRODUCT GUIDE 53

CSH-2402GWP<br />

24-Port 10/100Mbps with 2 Gigabit Copper/SFP Ports PoE Web Smart Switch<br />

CSH-2402GWP features 24 Power over Ethernet (PoE) ports which follow IEEE 802.3af,<br />

supplying up to 15.4 watts per port. This product can convert standard 90~260V/AC power<br />

into low-voltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant<br />

network accessories. By adding CSH-2402GWP to existing networking, installing networking<br />

products such as Access Points and IP cameras can be easily managed and set up. Wireless<br />

device deployments are easily located with available power outlets and network administrators<br />

don’t need to use heavy AC power adapters anymore. Through a Web-based interface, an<br />

administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and<br />

link aggregation to create fat traffic pipelines. Moreover, CSH-2402GWP supports 2 Combo<br />

Gigabit Copper or 2 SFP open slots to uplink to servers, storage, or other switching devices for<br />

long loop reach applications.<br />

Specifications<br />

Standards<br />

Ports<br />

MAC Address • 4K<br />

Buffer Memory • 2.75Mb<br />

Forwarding/Filtering Rate<br />

Media Support<br />

• IEEE 802.3 10BASE-T<br />

• IEEE 802.3u 100BASE-TX<br />

• IEEE 802.3ab 1000BASE-T<br />

• IEEE 802.3z 1000BASE SX/LX<br />

• IEEE 802.3x Flow Control<br />

• IEEE 802.3af Power over Ethernet (PoE)<br />

• IEEE 802.1q VLAN (Port Based and Tag Based)<br />

• IEEE 803.1p QoS/Class of Service, Priority Protocol<br />

• IEEE 802.1x Port Security<br />

• IEEE 802.1d Spanning Tree Protocol<br />

• IEEE 802.1w Rapid Spanning Tree Protocol<br />

• 24 10/100BASE-T(X) with 24 PSE/PoE Ports<br />

• 2 10/100/1000BASE-T copper Ports/ 2 Open SFP Slot<br />

• 14880 packets/second per port @ 10Mbps, maximum<br />

• 148800 packets/second per port @ 100Mbps, maximum<br />

• 1488000 packets/second per port @ 1000Mbps,<br />

maximum<br />

• 10BASE-T Cat. 3, 4, 5 UTP/STP<br />

• 100BASE-TX Cat. 5 UTP/STP<br />

• 1000BASE-T Cat.5E UTP/STP<br />

Smart Feature<br />

NETWORK SWITCHES<br />

Key Features<br />

• 24-Port 10/100Mbps with IEEE 802.3af<br />

PoE Switch<br />

• Web-based configuration and<br />

management<br />

• Supports PoE function ON/OFF Remote<br />

Control<br />

• All Ports Support Auto-MDI/MDI-X and<br />

Auto-negotiation Functions<br />

• Supports 26-Port VLAN, STP/RTSP, two<br />

Trunk Groups<br />

• Port VLAN: 24<br />

• Tagged VLAN: 4094<br />

• Trunk Groups: 2 (up to 4 Ports for each group)<br />

• PoE function ON/OFF remote Control<br />

• STP/RSTP (Spanning Tree and Rapid Spanning Tree<br />

Protocol)<br />

• MAC Filtering<br />

• IGMP Snooping<br />

• Broadcast Strom Control<br />

• Bandwidth Control<br />

• Port Mirroring<br />

• Password-Protected Access<br />

• Web-based Management<br />

Duplex Modes • Support Auto-negotiation and Auto-MDI/MDI-X functions<br />

LED Indicators<br />

Power<br />

PoE (Power over Ethernet) Switch & Accessory<br />

Power Output<br />

Power Consumption • 390W (Max)<br />

Environment<br />

• One LED displays Power Status<br />

• One LED per port displays Link/ACT<br />

• One LED per port displays PoE Status<br />

• Internal Full Range Auto-Switching<br />

• Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz<br />

• 48V/DC Per Port Output – 15.4W Max Per Port<br />

• 24 Ports at Full 15.4W Output Standard<br />

• Operating Temperature: 0° ~ 40°C (32° ~ 104°F)<br />

• Storage Temperature: -20° ~ 60°C (-4° ~ 140°F)<br />

• Humidity: 10% ~ 90% Non-condensing<br />

Dimensions (L x W x H) • 440 x 332 x 44mm (17.32 x 13.07 x 1.73inchs)<br />

Certifications • CE, FCC, RoHS<br />

2012 <strong>CNet</strong> <strong>PRODUCT</strong> GUIDE 53

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!