PRODUCT INTRODUCTION - CNet Technology, Inc.

PRODUCT INTRODUCTION - CNet Technology, Inc. PRODUCT INTRODUCTION - CNet Technology, Inc.

12.11.2012 Views

NETWORK SWITCHES Ethernet Switch with Expansion Ports CSH-2402G 24-Port 10/100Mbps Fast Ethernet Switch with 2 Gigabit Ports (RJ-45/ SFP Slots) CSH-2402G, with 2 Gigabit ports (Copper / SFP Ports) leads you to a real Gigabit connection and easily boosts your networking throughput. Users are now able to transfer large and high bandwidth-needed files in fast speed. Specifications Ports Standards Ports Forwarding/Filtering Rate 44 2012 CNet PRODUCT GUIDE • 24-Port 10/100Mbps Switch with 2 Gigabit Copper/SFP Ports • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000Base SX/LX • IEEE 802.3x Flow Control for Full-Duplex Operation • 24 Copper Ports (10/100Mbps) • 2 Copper Ports (10/100/1000Mbps) • 2 Open SFP Slot • 14880 packets/second per port@10Mbps, max • 148800 packets/second per port@100Mbps, max • 1488000 packets/second per port@1000Mbps, max Auto-MDIX • All TP ports support Auto-MDI/MDI-X Function LED Indicators MAC addresses • 4K Buffer Memory • 2.75Mb • One LED display Power status • Power ON: Light, Green • For Port 1 to 24 (10/100Mbps Ports): › Speed LED: 10Mbps: Blinking, Green 1000Mbps: Light on, Green › Link/ACT: Link: Light on ACT: Data Transmission • For Port 25/26 (Gigabit Ports) › Speed LED: 10Mbps: Light off 100Mbps: Blinking, Green 1000Mbps: Light on, Green › Link/ACT: Link: Light on ACT: Data Transmission Environment Power supply Certifications • CE,FCC Key Features • 2 SFP slots for optional fiber optical communication • Supports IEEE 802.3x for Full-duplex Flow- control and Back Pressure Flow-control for Half-duplex to prevent the overflow of data frame • Supports Auto-Negotiation & Auto MDI/ MDI-X on each TP Port • Operating temperature: 0° ~ 40° C • Storage temperature: -20° ~ 70° C • Humidity: 10% ~ 90% Non-condensing • Internal full range switching power supply • Input voltage:100 ~ 240 +-10%V AC 50/60 Hz Dimensions • 440x220x44 mm (17.36 x 5.12 x 1.73 inches)

CSH-2422Gm Layer 2 Management Switch with 24 10/100 BASE-TX ports and 2 Gigabit Ports (RJ-45/SFP slots) CSH-2422Gm is a Managed Fast Ethernet switch that support SNMP, Web UI, and CLI management interface and 24 10/100 Base-TX (RJ-45 connectors) and 2 Gigabit dual media (RJ-45/SFP) ports. It is a standard switch that meets 802.3/u/x/z Gigabit, Fast Ethernet specification. In addition, the switch implements the QoS (Quality of Service), VLAN, MAC Filtering Policy, Port Mirror, VLAN and full L2 protocols. It has a rich feature set suitable for streaming VoIP, video and data traffics for multimedia applications. In this switch, Port 25, 26 support two types of media – TP and SFP Fiber; both ports support 10/100/1000Mbps TP or 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion. Specifications Standards Ports Switching Capacity VLAN • IEEE 802.3 10BASE-T • IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000Base-X • IEEE 802.3x Flow Control for Full-Duplex Operation • IEEE 802.3 Auto-negotiation • IEEE 802.1q VLAN • IEEE 802.1p Class of Service • IEEE 802.1x Access Control • IEEE 802.1d Spanning Tree • IEEE 802.1w Rapid Spanning Tree • IEEE 802.3ad Link Aggregation Control Protocol (LACP) • 24 Ports 10/100 Mbps Ethernet Port • Port 25, 26 are Gigabit TP/SFP Fiber auto sense • Non-blocking switch fabric support up to 24FE_2GbE ports • 8K MAC addresses • 256k packet buffer and 128k control memory • The maximum throughput is 8.8Gbps • With 64 bytes packets throughput is 6.547Mbps • Support SVL/IVL configuration to meet your VLAN requirement • Port-base VLAN • IEEE 802.1q tag-base VLAN, 4094 max, up to 4k active VLANs including static plugs dynamic entry • Flooding unknown vlan frame setting, can flood packet with some vlan tag associated to a invalid/inactive vlan • In tag-base VLAN, supports egress/ingress packet filter • Q-in-Q as an efficient method for enabling Subscriber Aggregation QoS NETWORK SWITCHES Ethernet Switch with Expansion Ports Key Features • 24 10/100Mbps Switch Ports with 2 shared Copper/Fiber ports • Supports console, SNMP, Web, CLI management • Supports Q-in-Q VLAN, MAC-Based 802.3ad LACP, Port Mirroring, Unicast/ Broadcast/Multicast storm control • Port Based (VIP Port), 802.1p, TOS, and Diffserv(IPv4/ IPv6) based QoS packet classification • Supports four level priority queues to prioritize in-bound and out-bound traffic • Supports two scheduling, WRR and Strict • Supports priority in a Q-in-Q tag Broadcast Storm • Multicast/Broadcast/Unknown-Unicast Strom suppression Port Mirroring Isolated Group • Supports 1:N RX port mirroring • Supports ports sniffer function with 3 modes: (TX Monitor, RX Monitor and TX-RX pair Monitor Mode) • Provide one group allows certain to be designated as protect Restricted Group • Can decide with direction of transmitting for specific port Rate Limit Environment Power supply Certifications • CE, FCC • Ingress rate limit: › Port 1 ~ 24: 66K up to 100Mbps › Port 25, 26: 66K up to 1000Mbps • Egress rate limit: › Port 1 ~ 24: 66K up to 100Mbps › Port 25, 26: 66K up to 1000Mbps • Operating temperature: 0° ~ 40° C • Storage temperature: -20° ~ 70° C • Humidity: 10% ~ 90% Non-condensing • Internal full range switching power supply • Input voltage:100 ~ 240 +-10%V AC 50/60 Hz Dimensions • 442x209x44 mm (17.40 x 8.23 x 1.73 inches) 2012 CNet PRODUCT GUIDE 45

NETWORK SWITCHES<br />

Ethernet Switch with Expansion Ports<br />

CSH-2402G<br />

24-Port 10/100Mbps Fast Ethernet Switch with 2 Gigabit Ports (RJ-45/<br />

SFP Slots)<br />

CSH-2402G, with 2 Gigabit ports (Copper / SFP Ports) leads you to a real Gigabit connection<br />

and easily boosts your networking throughput.<br />

Users are now able to transfer large and high bandwidth-needed files in fast speed.<br />

Specifications<br />

Ports<br />

Standards<br />

Ports<br />

Forwarding/Filtering Rate<br />

44 2012 <strong>CNet</strong> <strong>PRODUCT</strong> GUIDE<br />

• 24-Port 10/100Mbps Switch with 2 Gigabit Copper/SFP<br />

Ports<br />

• IEEE 802.3 10BASE-T<br />

• IEEE 802.3u 100BASE-TX<br />

• IEEE 802.3ab 1000BASE-T<br />

• IEEE 802.3z 1000Base SX/LX<br />

• IEEE 802.3x Flow Control for Full-Duplex Operation<br />

• 24 Copper Ports (10/100Mbps)<br />

• 2 Copper Ports (10/100/1000Mbps)<br />

• 2 Open SFP Slot<br />

• 14880 packets/second per port@10Mbps, max<br />

• 148800 packets/second per port@100Mbps, max<br />

• 1488000 packets/second per port@1000Mbps, max<br />

Auto-MDIX • All TP ports support Auto-MDI/MDI-X Function<br />

LED Indicators<br />

MAC addresses • 4K<br />

Buffer Memory • 2.75Mb<br />

• One LED display Power status<br />

• Power ON: Light, Green<br />

• For Port 1 to 24 (10/100Mbps Ports):<br />

› Speed LED: 10Mbps: Blinking, Green<br />

1000Mbps: Light on, Green<br />

› Link/ACT: Link: Light on<br />

ACT: Data Transmission<br />

• For Port 25/26 (Gigabit Ports)<br />

› Speed LED: 10Mbps: Light off<br />

100Mbps: Blinking, Green<br />

1000Mbps: Light on, Green<br />

› Link/ACT: Link: Light on<br />

ACT: Data Transmission<br />

Environment<br />

Power supply<br />

Certifications • CE,FCC<br />

Key Features<br />

• 2 SFP slots for optional fiber optical<br />

communication<br />

• Supports IEEE 802.3x for Full-duplex Flow-<br />

control and Back Pressure Flow-control for<br />

Half-duplex to prevent the overflow of data<br />

frame<br />

• Supports Auto-Negotiation & Auto MDI/<br />

MDI-X on each TP Port<br />

• Operating temperature: 0° ~ 40° C<br />

• Storage temperature: -20° ~ 70° C<br />

• Humidity: 10% ~ 90% Non-condensing<br />

• Internal full range switching power supply<br />

• Input voltage:100 ~ 240 +-10%V AC 50/60 Hz<br />

Dimensions • 440x220x44 mm (17.36 x 5.12 x 1.73 inches)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!