catalog TELE - CONTA-CLIP

WatchDog pro module with digital inputs and analog in- and outputs for standard signals with a common ground (GND).
Input signals:
0-10V DC, 0-24V DC, 0-20mA DC, NPN, PNP
Functions
WatchDog pro
Fieldbus interface module
Output signals:
0-10V DC, 0-20mA DC, 12V DC, 24V DC
G2AM4 M with voltage input signal G2AM4 M with current input signal Connections
< WatchDog pro fieldbus connection to the process level
< Communication of I/O information to third party controls
< Data transmission via high speed bus
< Fieldbus interface modules are slaves on the fieldbus
< Modbus-RTU; Standard connection to touch panels
< Modbus-TCP
< Profibus-DPV1
< Width 22,5mm
< Industrial design
0 ... 10V DC
0 ... 24V DC
=
0 ... 20mA
Type G2FBC MB-RTU G2FBC MB-TCP G2FBC PB-DPV1
INU1 GND
INU2 GND
INI3
INI4
INU1 GND INI3
INU2 GND INI4
OUT GND
OUT GND
0-10V DC
0-20mA
Load
12V DC
24V DC
0-10V DC
0-20mA
Load
12V DC
24V DC
Art.No. (PQ1) 2500500 2500510 2500501
Art.No. (PQ10) - - -
EAN13-Code 9008662005679 9008662005716 9008662005686
Fieldbus Modbus-RTU Modbus-TCP Profibus-DPV1
G2AM4 M with current and voltage input signal G2AM4 M with 2 PNP-sensors (supplied via G2AM4 M) Connections
Connector Sub-D (female) RJ45 Sub-D (female)
0 ... 10V DC
0 ... 24V DC
= = 0 ... 20mA
PNP-sensor
OUT1 OUT2
- +
Controls
Baud rate
Address adjustment WatchDog pro:
Address range 1 to 99
Address adjustment Fieldbus:
Address range 1 to 247
Address adjustment WatchDog pro:
Address range 1 to 99
Address adjustment WatchDog pro:
Address range 1 to 99
Address adjustment Fieldbus:
Address range 1 to 126
INU1
INU2
GND
GND
INI3
INI4
INU1
INU2
GND
GND
INI3
INI4
Indicators (LEDs) U • Err • Com U • Err • Com U • Err • Com
Businterface High speed bus (RS485) High speed bus (RS485) High speed bus (RS485)
Galvanic separated yes yes yes
Supply 24V DC from local interface 24V DC from local interface 24V DC from local interface
Width 22,5mm 22,5mm 22,5mm
Certificates CE • GOST CE • GOST CE • GOST
OUT
GND
OUT
GND
Mechanical
Design
Self-extinguishing plastic housing, IP rating IP20 • Mounted on DIN-rail TS 35 in accordance with EN 60715 • Mounting position: any •
Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque: max. 1Nm
24V
0V
2-wire-sensor
G2AM4 M with PNP-sensor and 4-20mA 3-wire-sensor Width 22,5mm Connections, Dimensions
Terminal capacity
Ambient
conditions
Accessories
G2FBC MB-RTU
1 x 0.5 to 2.5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0.5 to 1.5mm² with/without multicore cable end
• 2 x 2.5mm² flexible without multicore cable end
Ambient temperature: -25 to +55°C (in accordance with IEC 60068-1); -25 to +40°C (in accordance with UL 508) • Storage temperature: -25
to +70°C • Transport temperature: -25 to +70°C • Relative humidity: 15% to 85% (in accordance with IEC 60721-3-3 class 3K3) • Absolute
humidity: 1g to 25g H 2
O/m 3 (in accordance with IEC 60721-3-3 class 3K3) • Pollution degree: 2 (in accordance with IEC 60664-1) • Vibration
resistance: 10 to 55Hz 0.35mm (in accordance with IEC 60068-2-6) • Shock resistance: 15g 11ms (in accordance with IEC 60068-2-27
STANDARD CABLE HMI/WDP RS485 5M • CABLE HMI/WDP RS485 5M
PNP-sensor
4-20mA
3-wire-sensor
INU1
INU2
GND
GND
INI3
INI4
7
OUT
GND
Page 192
www.tele-online.com Page 193