catalog TELE - CONTA-CLIP

WatchDog pro module for voltage measurement in 1-phase mains.
Functions
WatchDog pro
Voltage monitoring in 3-phase mains
Measured ranges 60mV AC/DC Measured ranges 150mV AC/DC Measured ranges 10V AC/DC Connections
< Voltage measurement in 3-phase mains for 3- and 4-wire circuit
< Connection of neutral conductor optional
< Monitoring of phase sequence and phase failure
< Monitoring of asymmetry
< Reinforced insulation of the measuring circuit
< Measured value transmitting via standard bus
< Modular monitoring system
< Width 22,5mm
< Industrial design
Umax = 60mV AC/DC
Umax = 150mV AC/DC
Umax = 10V AC/DC
G2UI1 10V
Type G2PI1 400V G2PI480V
max.
20A
E
F1 F2 F3
E
F1 F2 F3
E
F1 F2 F3
Measured ranges 30V AC/DC Measured ranges 60V AC/DC Measured ranges 300V AC/DC Connections
Umax = 30V AC/DC
Width 22,5mm
max.
20A
E
F1 F2 F3
Umax = 60V AC/DC
E
max.
20A
F1 F2 F3
Umax = 300V AC/DC
E
F1 F2 F3
max.
20A
G2UI1 300V
Dimensions
Art.No. (PQ1) 2500350 2500360
Art.No. (PQ10) - -
EAN13-Code 900866200490 -
Measured variable Voltage AC Sinus (48 to 63Hz) Voltage AC Sinus (48 to 63Hz)
Measured ranges
Controls
Phase voltages (U 1
, U 2
, U 3
): 0 to 300V
Average phase-phase voltage (U AVG
): 0 to 520V
Asymmetry: 0% to 100%
Phase sequence: 1 (clockwise rotation) • 0 (counter clockwise
rotation)
Address adjustment:
Address range 1 to 99
Phase voltages (U 1
, U 2
, U 3
): 0 to 360V
Average phase-phase voltage (U AVG
): 0 to 624V
Asymmetry: 0% to 100%
Phase sequence: 1 (clockwise rotation) • 0 (counter clockwise
rotation)
Address adjustment:
Address range 1 to 99
Indicators (LEDs) U • Err • Com U • Err • Com
Businterface Standard bus (RS485) Standard bus (RS485)
Overvoltage cat. III (in accordance with IEC 60664-1) III (in accordance with IEC 60664-1)
Rated surge voltage 6kV 6kV
Supply 24V DC from local interface 24V DC from local interface
Output - -
Width 22,5mm 22,5mm
Certificates CE • GOST CE • GOST
Mechanical
Design
Terminal capacity
Ambient
conditions
Accessories -
Self-extinguishing plastic housing, IP rating IP20 • Mounted on DIN-rail TS 35 in accordance with EN 60715 • Mounting position: any •
Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque: max. 1Nm
1 x 0.5 to 2.5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0.5 to 1.5mm² with/without multicore cable end
• 2 x 2.5mm² flexible without multicore cable end
Ambient temperature: -25 to +55°C (in accordance with IEC 60068-1); -25 to +40°C (in accordance with UL 508) • Storage temperature: -25
to +70°C • Transport temperature: -25 to +70°C • Relative humidity: 15% to 85% (in accordance with IEC 60721-3-3 class 3K3) • Absolute
humidity: 1g to 25g H 2
O/m 3 (in accordance with IEC 60721-3-3 class 3K3) • Pollution degree: 2 (in accordance with IEC 60664-1) • Vibration
resistance: 10 to 55Hz 0.35mm (in accordance with IEC 60068-2-6) • Shock resistance: 15g 11ms (in accordance with IEC 60068-2-27)
7
Page 166
www.tele-online.com Page 167