catalog TELE - CONTA-CLIP

The user-defined program is stored and executed in the central unit (CU).
The LED’s provide information about the current operation status (error, mode of operation, status of in-/outputs, communication and datalogger)
of the system. Facility- and system data are saved event-triggerd on the MultiMediaCard TM (MMC TM ) by the usage of the datalogger.
The operation mode can be chosen by the use of the mode selector with following settings:
RRun
RStop
Run
Stop
Remote Run (program runs after reset, access of the programming environment to the Central unit is possible)
Remote Stop (program doesn‘t run after reset, access of the programming environment to the Central unit is possible)
Program runs after reset, access of the programming environment to the Central unit is only possible to a limited degree,
communication with modem
Program doesn‘t run after reset, access of the programming environment to the CU is only possible to a limited degree
The firmware and applications can be updated via the software. The firmware and application update can also be performed by means of
the MultiMediaCard TM .
Functions
Connections
WatchDog pro
Voltage monitoring in 1-phase mains
< Voltage measurement in 1-phase mains
< Measured range 10V for standard signal (G2UI1 10V)
< Measuring ranges for 30V, 60V and 300V (G2UI1 300V)
< Measuring ranges 60mV and 150mV for shunt measurement (G2UI1 10V)
< Reinforced insulation of the measuring circuit
< Measured value transmitting via standard bus
< Modular monitoring system
< Width 22,5mm
< Industrial design
Digital inputs:
DIGND +24V ... 100V DC / 24 ... 230V AC
Type G2UI1 10V G2UI1 300V
Optional serial interface:
PC: GND RXD TXD
DI
DI3
DI4
13
14
DI1 DI2 SG STX SRX
RB
RB+ RBA RBB
Supply:
GND
24V
23
24
Art.No. (PQ1) 2500050 2500051
GND
24V DC
Art.No. (PQ10) - -
remote bus:
GND A B
EAN13-Code 900866200523 900866200488
Width 45mm
Dimensions
Measured variable
Measured ranges
Voltage AC/DC
DC or AC Sinus (16,6 to 400Hz)
60mV AC/DC; terminals E-F1(+)
150mV AC/DC; terminals E-F2(+)
10V AC/DC; terminals E-F3(+)
Voltage AC/DC
DC or AC Sinus (16,6 to 400Hz)
30V AC/DC; terminals E-F1(+)
60V AC/DC; terminals E-F2(+)
300V AC/DC; terminals E-F3(+)
Controls
Address adjustment:
Address range 1 to 99
Address adjustment:
Address range 1 to 99
7
45
Indicators (LEDs) U • Err • Com U • Err • Com
Businterface Standard bus (RS485) Standard bus (RS485)
Overvoltage cat. III (in accordance with IEC 60664-1) III (in accordance with IEC 60664-1)
Rated surge voltage 6kV 6kV
Supply 24V DC from local interface 24V DC from local interface
Output - -
Width 22,5mm 22,5mm
Certificates CE • GOST CE • GOST
Mechanical
Design
Self-extinguishing plastic housing, IP rating IP20 • Mounted on DIN-rail TS 35 in accordance with EN 60715 • Mounting position: any •
Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque: max. 1Nm
Accessories
G4NG230V24V2.5A Power supply, 230VAC, 24VDC/2,5A, 1-phase 2600000
WDP SOFT
Parameterisation software
2500030
Programming environment on CD, running on Windows 98/ME/2000/XP
MMC-READER
MMC read out package
including Datenlogger software and MMC Card Reader
2500035
Terminal capacity
Ambient
conditions
Accessories -
1 x 0.5 to 2.5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0.5 to 1.5mm² with/without multicore cable end
• 2 x 2.5mm² flexible without multicore cable end
Ambient temperature: -25 to +55°C (in accordance with IEC 60068-1); -25 to +40°C (in accordance with UL 508) • Storage temperature: -25
to +70°C • Transport temperature: -25 to +70°C • Relative humidity: 15% to 85% (in accordance with IEC 60721-3-3 class 3K3) • Absolute
humidity: 1g to 25g H 2
O/m 3 (in accordance with IEC 60721-3-3 class 3K3) • Pollution degree: 2 (in accordance with IEC 60664-1) • Vibration
resistance: 10 to 55Hz 0.35mm (in accordance with IEC 60068-2-6) • Shock resistance: 15g 11ms (in accordance with IEC 60068-2-27)
WDP COM
Communication equipment WatchDog pro
including USB serial converter and interface cable RS232
2500040
WDP GSM Datacenter WatchDog pro GSM Datensolotion for the two-way communication 2500046
WDP GPRS Datacenter WatchDog pro GPRS Datensolotion for the two-way communication 2500048
WDP GSM WatchDog pro GSM Package for the simple report of informations via SMS 2500045
MMC 1GB MultiMediaCard 1GB (formated memorycard) 2500010
MMC 2GB MultiMediaCard 2GB (formated memorycard) 2500020
STANDARD CABLE HMI/WDP RS485 5M RS485 Standard connecting cable WDP/Touchpanel, display type LCD/STN/TFT 2500894
Page 164
www.tele-online.com Page 165