catalog TELE - CONTA-CLIP

OVP1
Automatic (AUTO): The contact of checkback B1-B2 is closed. The input signal applied to terminal YR is looped through unchanged to
terminal Y.
Permanently OFF (0): The contact of checkback B1-B2 is opened. No outputsignal at terminal Y.
Manual signal (HAND): The contact of checkback B1-B2 is opened. Output signal at terminal Y (0 to 10V DC) according to the value set
on the front mounted regulator.
OCP1
Automatic (AUTO): The contact of checkback B1-B2 is closed. The input signal applied to terminal YR is looped through unchanged to
terminal Y.
Permanently OFF (0): The contact of checkback B1-B2 is opened. No outputsignal at terminal Y.
Manual signal (HAND): The contact of checkback B1-B2 is opened. Output signal at terminal Y (0 to 20mA DC) according to the value set
on the front mounted regulator.
Functions
Coupling units Series OCTO
Levelswitch
< Trigger 1 to 10V DC (OVL1)
< Trigger 2 to 20mA DC (OCL1)
< Checkback signal for switch setting AUTO
< 1 CO contact
< Width 17,5mm
< Installation design
OVP1 OCP1 Connections
24V
0V
0-10V
24V
0V
0-20mA
Type OVL1 24VAC/DC OCL1 24VAC/DC
A1
A2
A1
A2
B1
B2
B1
B2
YR Y
Potentiometer
Output
0-10V
YR Y
Potentiometer
output signal
0-20mA
GND
YR
GND
YR
GND
Y
GND
Y
Art.No. (PQ1) 170015 170017
Art.No. (PQ10) - -
EAN13-Code 900866200072 900866200074
Controls Function • levelswitch Function • levelswitch
Width 17,5mm
Dimensions
Indicators (LEDs) U • R U • R
Functions
AUTO (output according to signal on YR)
0 (permanently OFF)
1 (permanently ON)
AUTO (output according to signal on YR)
0 (permanently OFF)
1 (permanently ON)
Trigger level 1 to 10V DC 2 to 20mA DC
Analogue input
Checkback
Supply
Output
input for automatic operation
0 to 10V DC
terminals YR-A2
1 potential free NO contact for checkback signal of the switch setting
AUTO
28V AC/DC; 2A
terminals B1-B2
24V AC/DC
terminals A1-A2
1 potential free CO contact
250V AC, 8A
input for automatic operation
0 to 20mA DC
terminals YR-A2
1 potential free NO contact for checkback signal of the switch setting
AUTO
28V AC/DC; 2A
terminals B1-B2
24V AC/DC
terminals A1-A2
1 potential free CO contact
250V AC, 8A
Width 17,5mm 17,5mm
Certificates CE • GOST CE • GOST
Mechanical
design
Terminal capacity
Ambient
conditions
Accessories -
Self-extinguishing plastic housing, IP rating IP40 • Mounted on DIN-Rail TS 35 in accordance with EN 60715 • Mounting position any •
Shockproof terminal connection according to VBG 4 (PZ1 required), IP rating IP20 • Tightening torque max. 1Nm
1 x 0,5 to 2,5mm² with/without multicore cable end • 1 x 4mm² without multicore cable end • 2 x 0,5 to 1,5mm² with/without multicore cable end
• 2 x 2,5mm² flexible without multicore cable end
Ambient temperature: -25 to +55°C (in accordance with IEC 60068-1) • Storage temperature: -25 to +70°C • Transport temperature: -25 to
+70°C • relative humidity: 15% to 85% (in accordance with IEC 60721-3-3 class 3K3) • Pollution degree: 2, if built in 3 (in accordance with IEC
60664-1)
Page 230 www.tele-online.com
Page 231