www.americanlighting.com LINEAR LED WALL WASHER, RGB ...

BILL OF MATERIALS
� Determine total length of surface to be lighted - for applications where linear wall washers will be within 6” of the
surface, plan on running fixtures end-to-end for best results (to avoid gaps in light wash effect)
� Consider locations of areas to be lighted - if non-adjacent areas can be linked, determine quanitity and lengths of
signal cables needed; remember to provide a 120V outlet for each unit (requires a GFCI protected circuit if outdoors)
� For synchronous color fades and standard color select, order one LW36-CON for each run of 30 unit or less
� For custom shows, custom colors and/or multi-channel scenes, specify DMX-HD with LW36-XLR3 or LW36-XLR3-15
Custom cables also available, consult with factory
INSTALLATION EXAMPLE
LW36X1-RGB
10 9 2 1
Bill of materials for 40 foot
installation above:
(10) LW36X1-RGB
(1) LW36-CON
LW36X1-RGB
LW36X1-RGB
LW36X1-RGB
Each fixture has the following cords:
• Power input with five foot power cord (no power out cable)
• Signal input using male mini 3-pin connector, 12” length
• Signal output using female mini 3-pin connector, 12” length
www.americanlighting.com
LW36-
CON
7