GPS-X Technical Reference

425 Miscellaneous
Figure 15-9 - Steady State Parameters
Figure 15-10 - More Steady-State Parameters
The next four items shown in these forms deal with other termination criteria and output control.
The status of the solver is printed at a frequency controlled by the convergence output interval,
while the steady-state loop counter initial value specifies which iteration loop will be first
printed to the simulation Log window. The maximum number of iterations limits the steadystate
solver to attempting only this many iterations. The loop counter is reset after each retry.
Another steady-state termination criterion is the maximum number of unsuccessful iterations
which will cause the steady-state solver to terminate if an improvement in the value of the sum of
the derivatives is not made within this number of loops.
GPS-X Technical Reference